61082-202109 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 61082-202109 is a 200-position rectangular connector receptacle with outer shroud contacts designed for surface mount applications. This component features the BergStak® 0.80mm series architecture with gold-plated contacts and board guide support. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

61082-202109

Amphenol ICC (FCI)In Stock: 103261082-202109 Datasheet

Current PartRFQ

61082-202402LF

Amphenol ICC (FCI)In Stock: 108761082-202402LF Datasheet

DirectRFQ

61082-202600LF

Amphenol ICC (FCI)In Stock: 99261082-202600LF Datasheet

Parametric EquivalentRFQ

61082-202609LF

Amphenol ICC (FCI)In Stock: 114561082-202609LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 61082-202109 are identified based on strict electrical and mechanical parameter alignment within the BergStak® 0.80mm connector family. The following criteria determine substitution eligibility:

Critical Parameters for Substitution:

• Connector type: Receptacle with outer shroud contacts
• Number of positions: 200
• Pitch: 0.031" (0.80mm)
• Number of rows: 2
• Mounting type: Surface mount
• Contact finish: Gold
• Mated stacking heights: 9mm, 10mm, 11mm, 12mm
• Height above board: 0.303" (7.70mm)
• Board guide feature presence

Substitute Classification:

Direct Manufacturer Substitute: 61082-202402LF meets all critical electrical and mechanical parameters with identical connector architecture. This part transitions from obsolete to active product status with RoHS compliance and enhanced contact finish thickness (8.00µin vs. 4.00µin).

Parametric Equivalents: 61082-202600LF and 61082-202609LF maintain all critical electrical and mechanical specifications identical to the original part, including contact finish thickness (4.00µin). Both are active products with RoHS compliance. Differentiation exists only in packaging format (tube vs. cut tape).

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Active Production: Select 61082-202402LF, 61082-202600LF, or 61082-202609LF based on packaging requirements and supply chain logistics. All three parts are active products with RoHS compliance, addressing regulatory requirements that the obsolete 61082-202109 does not meet.

Contact Finish Thickness Consideration: 61082-202402LF features doubled contact finish thickness (8.00µin) compared to the original part and parametric equivalents (4.00µin). This enhanced plating provides increased durability for high-cycle mating applications.

Packaging Selection: 61082-202402LF is supplied in cut tape format suitable for automated pick-and-place assembly. 61082-202600LF and 61082-202609LF are supplied in tube packaging, appropriate for manual assembly or alternative handling workflows.

Compliance Status: All substitute parts meet RoHS compliance requirements, whereas the original 61082-202109 is RoHS non-compliant. REACH-affected status applies to all substitute parts.

Frequently Asked Questions (FAQ)

Q: Can 61082-202402LF directly replace 61082-202109 in existing assemblies? A: Yes. The parts share identical electrical and mechanical specifications including connector type, position count, pitch, mounting type, and stacking heights. The primary differences are product status (active vs. obsolete), RoHS compliance, and contact finish thickness.

Q: What is the significance of the contact finish thickness difference in 61082-202402LF? A: The 61082-202402LF provides 8.00µin gold plating versus 4.00µin in the original part. This increased thickness enhances contact durability and wear resistance in applications requiring frequent mating cycles.

Q: Are 61082-202600LF and 61082-202609LF electrically identical to the original part? A: Yes. Both parts maintain identical electrical and mechanical parameters to 61082-202109, including contact finish thickness (4.00µin). Differentiation exists only in packaging format and inventory availability.

Q: Which substitute part should be selected for automated assembly? A: 61082-202402LF is supplied in cut tape packaging, optimized for automated pick-and-place equipment. 61082-202600LF and 61082-202609LF in tube packaging are suitable for manual assembly workflows.

Q: Does the obsolete status of 61082-202109 affect compatibility with mating connectors? A: No. The obsolete designation reflects manufacturing discontinuation, not functional incompatibility. All substitute parts maintain full mechanical and electrical compatibility with existing mating connectors designed for the BergStak® 0.80mm series.

Q: Are all substitute parts RoHS compliant? A: Yes. 61082-202402LF, 61082-202600LF, and 61082-202609LF are all RoHS compliant, whereas the original 61082-202109 is RoHS non-compliant. This compliance is required for applications subject to RoHS regulations.