Amphenol ICC 61082-042002 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 61082-042002 is a 40-position rectangular connector receptacle with outer shroud contacts designed for surface mount applications. This connector is part of the BergStak® 0.80mm series and features gold-plated contacts with a 0.031" (0.80mm) pitch configuration across 2 rows.

The 61082-042002 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production and field replacement applications.

Substiute Parts

61082-042002

Amphenol ICC (FCI)In Stock: 162061082-042002 Datasheet

Current PartRFQ

61082-042400LF

Amphenol ICC (FCI)In Stock: 104061082-042400LF Datasheet

MFR RecommendedRFQ

10144517-042803LF

Amphenol ICC (FCI)In Stock: 87510144517-042803LF Datasheet

Parametric EquivalentRFQ

61082-042402LF

Amphenol ICC (FCI)In Stock: 237961082-042402LF Datasheet

Parametric EquivalentRFQ

61082-042402PLF

Amphenol ICC (FCI)In Stock: 69561082-042402PLF Datasheet

Parametric EquivalentRFQ

61082-042406LF

Amphenol ICC (FCI)In Stock: 109861082-042406LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 61082-042002 is determined by the following critical parameters that must remain constant across all equivalent parts:

• Connector Type: Receptacle, Outer Shroud Contacts
• Number of Positions: 40
• Pitch: 0.031" (0.80mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 8.00µin (0.203µm)
• Height Above Board: 0.303" (7.70mm)
• Mated Stacking Heights: 9mm, 10mm, 11mm, 12mm
• Features: Board Guide
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts maintain these electrical and mechanical parameters. Variations in packaging format (Tube, Tape & Reel), product status (Active vs. Obsolete), RoHS compliance, and REACH classification do not affect functional interchangeability in the connector interface itself.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain identical electrical and mechanical interface specifications with the 61082-042002. Selection among active alternatives should be based on the following criteria:

61082-042400LF is the manufacturer-recommended substitute. This part is active, RoHS compliant, and available in Tube packaging. It is suitable for applications requiring RoHS compliance and standard production volumes.

61082-042402LF and 61082-042406LF are parametric equivalents available in Tape & Reel packaging, both RoHS compliant and active. These are appropriate for high-volume automated assembly processes where tape and reel packaging is preferred.

61082-042402PLF is a parametric equivalent in Tape & Reel packaging with active product status. This part is suitable for applications where tape and reel format is required.

10144517-042803LF is a parametric equivalent from the BergStak® Lite 0.80mm series. This part is active and available in Tape & Reel packaging. The Lite series designation indicates a design variant within the same electrical and mechanical interface specifications.

For new designs or production transitions, selection of an active part with RoHS compliance is recommended. For legacy system maintenance where the original 61082-042002 is no longer available, any of the listed active substitutes will provide equivalent connector interface performance.

Frequently Asked Questions (FAQ)

Q: Can the 61082-042002 be directly replaced with any of the listed substitute parts?

A: Yes. All listed substitute parts maintain identical connector interface specifications including position count, pitch, mounting type, contact finish, and physical dimensions. Direct substitution is supported at the connector interface level.

Q: What is the difference between the BergStak® 0.80mm and BergStak® Lite 0.80mm series?

A: Both series maintain the same electrical and mechanical interface parameters specified for this 40-position connector. The Lite designation indicates a design variant. The connector interface specifications remain identical.

Q: Does packaging format affect connector compatibility?

A: No. Packaging format (Tube, Tape & Reel) affects only the supply and handling method, not the connector's electrical or mechanical interface. Selection should be based on assembly process requirements.

Q: Are there RoHS compliance differences between substitutes?

A: Yes. The 61082-042002 is RoHS non-compliant. Several active substitutes (61082-042400LF, 61082-042402LF, 61082-042406LF) are RoHS compliant. For applications requiring RoHS compliance, select from the compliant alternatives.

Q: What is the inventory status of these parts?

A: The 61082-042002 has 1520 pieces in stock but is obsolete. Active substitutes have varying inventory levels: 61082-042400LF (967 pcs), 10144517-042803LF (815 pcs), 61082-042402LF (2316 pcs), 61082-042402PLF (659 pcs), and 61082-042406LF (1084 pcs).

Q: Can I use 10144517-042803LF as a direct replacement?

A: Yes. The 10144517-042803LF maintains all critical connector interface parameters. It is from the BergStak® Lite series and is active with Tape & Reel packaging available.