Curtis Industries 6106000 Terminal Block Connector Equivalent & Substitute Parts

Part Overview

The Curtis Industries 6106000 is a 2-position feed-through terminal block connector rated for 8-22 AWG wire gauges, with screw termination and polyamide insulation. This component is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system integration and procurement.

Substiute Parts

6106000

Curtis IndustriesIn Stock: 9186106000 Datasheet

Current PartRFQ

6106001

Curtis IndustriesIn Stock: 10756106001 Datasheet

SimilarRFQ

10134253-001LF

Amphenol AnytekIn Stock: 97910134253-001LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Curtis Industries 6106000 terminal block connector is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Number of Positions: 2
• Number of Levels: 1
• Terminal Width: 7.0mm
• Termination Style: Screw
• Wire Gauge Range: 8-22 AWG (0.5-10mm²)
• Stripping Length: 12mm
• Current Rating (IEC): 41 A minimum
• Voltage Rating (IEC): 800V minimum
• Current Rating (UL): 50 A minimum
• Voltage Rating (UL): 600V minimum
• Insulation Material: Polyamide or equivalent nylon-based polymer

Acceptable Variation Parameters:

• Color (functional equivalence maintained regardless of color)
• Product Status (active alternatives preferred for obsolete parts)
• RoHS Compliance Status (compliance improvements acceptable)
• Manufacturer (cross-manufacturer substitution permitted within parameter constraints)

Parameter Comparison

Engineering Selection Recommendations

Curtis Industries 6106001 (Blue variant): This part maintains identical electrical and mechanical specifications to the 6106000 and is currently in active production status. The primary distinction is color coding (blue versus gray) and RoHS compliance status. Selection of this substitute is appropriate for applications where color differentiation is not functionally critical and RoHS non-compliance is acceptable within the system design constraints.

Amphenol Anytek 10134253-001LF: This cross-manufacturer substitute meets all mandatory compatibility parameters and provides enhanced electrical performance with 1000V IEC voltage rating compared to the 800V specification of the original part. This component is active in production and carries ROHS3 compliance certification, making it suitable for applications requiring improved regulatory alignment. The insulation material composition differs slightly (PA versus PA66) but remains within polyamide polymer classification.

Both substitute parts maintain feed-through configuration, 2-position architecture, 7.0mm terminal width, screw termination, and 12mm stripping length specifications. Wire gauge acceptance ranges and current ratings remain consistent across all three components.

Frequently Asked Questions (FAQ)

Q: Can Curtis Industries 6106001 be used as a direct replacement for 6106000?

A: Yes. The 6106001 maintains identical electrical ratings (41 A IEC, 800V IEC, 50 A UL, 600V UL), mechanical configuration (2 positions, 1 level, 7.0mm terminal width), and termination specifications (screw, 12mm stripping length). The color difference (blue versus gray) is cosmetic and does not affect electrical or mechanical function.

Q: What is the advantage of selecting Amphenol Anytek 10134253-001LF over Curtis Industries alternatives?

A: The Amphenol Anytek part provides 1000V IEC voltage rating, exceeding the 800V specification of the Curtis Industries 6106000. Additionally, this component carries ROHS3 compliance certification, whereas the Curtis Industries 6106001 is RoHS non-compliant. Selection depends on system voltage requirements and regulatory compliance mandates.

Q: Are there any mechanical incompatibilities between these substitute parts?

A: No. All three components share identical mechanical specifications: 2-position, 1-level configuration; 7.0mm terminal width; screw termination; 8-22 AWG wire gauge acceptance; and 12mm stripping length. Physical mounting and wire connection procedures are equivalent.

Q: Does wire gauge compatibility differ between the main part and substitutes?

A: No. All components accept 8-22 AWG wire gauges, equivalent to 0.5-10mm² cross-sectional area. Stripping length requirements are uniform at 12mm across all three parts.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating?

A: All three components carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity constraints during storage, handling, or installation. Standard storage conditions are acceptable without desiccant requirements.