Equivalent & Substitute Parts for 60S1-TP

Part Overview

The 60S1-TP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 100 V DC reverse voltage and 6 A average rectified current in a DO-201AD axial through-hole package. This component is classified as "Not For New Designs," indicating it has been superseded in the manufacturer's product line. Identifying equivalent and substitute parts is necessary for applications requiring continued support, legacy system maintenance, or when the primary part becomes unavailable.

Substiute Parts

60S1-TP

Micro Commercial CoIn Stock: 283060S1-TP Datasheet

Current PartRFQ

1N5809

Microchip TechnologyIn Stock: 23611N5809 Datasheet

SimilarRFQ

GI751-E3/54

Vishay General Semiconductor - Diodes DivisionIn Stock: 21962GI751-E3/54 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 60S1-TP is determined by the following critical parameters:

Primary Substitution Criteria:

• Voltage - DC Reverse (Vr) (Max): Must equal or exceed 100 V
• Current - Average Rectified (Io): Must equal or exceed 6 A
• Mounting Type: Must be Through Hole
• Package Configuration: Must be Axial

Secondary Compatibility Factors:

• Forward voltage drop (Vf) at rated current
• Reverse recovery speed classification
• Reverse leakage current
• Operating temperature range
• RoHS and regulatory compliance status

Parts meeting the primary criteria are classified as direct substitutes. Variations in secondary parameters indicate performance differences that may affect circuit behavior but do not preclude functional substitution within the specified electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

GI751-E3/54 (Vishay General Semiconductor - Diodes Division)

The GI751-E3/54 is the primary substitute for the 60S1-TP. Both parts share identical voltage and current ratings (100 V, 6 A), matching reverse leakage current (5 µA @ 100 V), and identical capacitance specifications (150 pF @ 4 V, 1 MHz). Both employ standard recovery speed classification. The GI751-E3/54 maintains ROHS3 compliance and operates within the same temperature range (-50°C ~ 150°C overlaps the 60S1-TP range). The primary difference is the package designation (P600 versus DO-201AD), which represents a physical form factor variation in axial through-hole construction. The GI751-E3/54 is currently in active production status with substantial inventory availability (21,923 pcs).

1N5809 (Microchip Technology)

The 1N5809 is a partial substitute with significant limitations. While it matches the 100 V voltage rating and reverse leakage current, it is rated for only 3 A average rectified current, which is 50% below the 60S1-TP specification. The 1N5809 employs fast recovery speed (≤ 500 ns), contrasting with the standard recovery classification of the 60S1-TP. The 1N5809 is RoHS non-compliant, whereas the 60S1-TP is ROHS3 compliant. The 1N5809 is suitable only for applications where the 6 A current requirement can be reduced to 3 A or lower, and where RoHS compliance is not mandated.

Frequently Asked Questions (FAQ)

Q: Can the 1N5809 be used as a direct replacement for the 60S1-TP?

A: No. The 1N5809 is rated for 3 A average rectified current, while the 60S1-TP is rated for 6 A. Using the 1N5809 in a circuit designed for 6 A operation will result in component overstress and potential failure. The 1N5809 is suitable only for applications requiring 3 A or less.

Q: What is the difference between the DO-201AD and P600 packages?

A: Both are axial through-hole package designations for rectifier diodes. DO-201AD and P600 represent different manufacturer package specifications but serve the same functional purpose in through-hole circuit board applications. Physical dimensions may vary slightly; verify mechanical compatibility with your specific PCB layout.

Q: Is the GI751-E3/54 fully compatible with the 60S1-TP?

A: The GI751-E3/54 meets all primary electrical substitution criteria: 100 V voltage rating, 6 A current rating, through-hole mounting, and axial configuration. Both parts share identical reverse leakage current and capacitance specifications. The GI751-E3/54 is ROHS3 compliant and in active production. Verify mechanical fit with your PCB design due to package designation differences.

Q: Why is the 60S1-TP marked "Not For New Designs"?

A: This designation indicates the part has been superseded by the manufacturer and is no longer recommended for new product development. Existing inventory remains available for legacy system support and maintenance applications.

Q: Does the faster recovery speed of the 1N5809 make it a better choice?

A: Faster recovery speed (≤ 500 ns versus > 500 ns) reduces switching losses in high-frequency applications but does not compensate for the 1N5809's insufficient current rating. The current rating is the limiting factor for substitution eligibility.

Q: Are there any RoHS compliance concerns with substitution?

A: The 60S1-TP is ROHS3 compliant. The GI751-E3/54 is also ROHS3 compliant, maintaining regulatory alignment. The 1N5809 is RoHS non-compliant; substitution with this part may violate RoHS requirements in regulated applications.

Q: What is the temperature operating range difference between these parts?

A: The 60S1-TP operates from -55°C to 150°C. The GI751-E3/54 operates from -50°C to 150°C, providing slightly reduced low-temperature performance. The 1N5809 operates from -65°C to 175°C, offering extended temperature range. For most applications, the GI751-E3/54 temperature range is sufficient.