TE Connectivity AMP Connectors 60619-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 60619-7 is a socket contact connector designed for the Commercial MATE-N-LOK series. This component is a rectangular connector socket rated for 14-20 AWG wire gauges with gold plating and crimp termination. The part is currently active in production with 834 pieces available in new original inventory stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are met, allowing for component interchangeability in applications where the primary part is unavailable or when design requirements permit alternative contact finishes or compliance certifications.

Substiute Parts

60619-7

TE Connectivity AMP ConnectorsIn Stock: 88660619-7 Datasheet

Current PartRFQ

0002081004

MolexIn Stock: 204770002081004 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 60619-7 are identified based on the following critical parameters that determine functional interchangeability:

Core Matching Parameters:

• Pin or Socket configuration: Socket
• Wire Gauge rating: 14-20 AWG
• Contact Termination method: Crimp
• Packaging format: Bulk
• Moisture Sensitivity Level: 1 (Unlimited)
• HTSUS classification: 8536.90.4000

Variable Parameters Permitting Substitution:

• Contact Finish material (Gold vs. Tin)
• Contact Finish Thickness
• Manufacturer and series designation
• RoHS and REACH compliance status

The substitute part 0002081004 (Molex MLX 42024 series) maintains all core matching parameters while differing in contact finish specification and compliance certifications. This substitution is valid where the application permits tin-plated contacts in place of gold-plated contacts and where the alternative compliance profile is acceptable.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 60619-7 (Primary Selection)

Select the 60619-7 when gold-plated contact finish is specified in the design or when the application requires the specific contact finish thickness of 30.0µin (0.76µm). This part is active in production with established inventory availability.

Molex 0002081004 (Substitute Selection)

The Molex 0002081004 serves as a functional substitute when the application permits tin-plated contacts and when ROHS3 compliance and REACH unaffected status are required. This part maintains equivalent electrical and mechanical performance for 14-20 AWG crimp socket applications. The substitute part carries higher inventory availability (20,389 pieces) and meets current environmental compliance standards.

Both parts are classified as Active products with unlimited moisture sensitivity rating, confirming suitability for standard commercial connector applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0002081004 be used in place of the TE Connectivity 60619-7?

A: Yes, the Molex 0002081004 is a functional substitute provided the application permits tin-plated contacts instead of gold-plated contacts. Both parts are socket contacts rated for 14-20 AWG wire gauges with crimp termination and identical moisture sensitivity ratings.

Q: What is the primary difference between these two parts?

A: The primary difference is the contact finish material and thickness. The TE Connectivity 60619-7 features gold plating at 30.0µin (0.76µm), while the Molex 0002081004 features tin plating at 20.0µin (0.51µm). The Molex part also carries ROHS3 compliance and REACH unaffected status.

Q: Are both parts available in bulk packaging?

A: Yes, both the TE Connectivity 60619-7 and Molex 0002081004 are supplied in bulk packaging format.

Q: What wire gauge range do these connectors support?

A: Both parts support wire gauges from 14 AWG to 20 AWG with crimp termination.

Q: Do these parts have moisture sensitivity concerns?

A: No. Both parts carry Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Which part should be selected for new designs requiring environmental compliance?

A: The Molex 0002081004 is recommended for new designs requiring ROHS3 compliance and REACH unaffected status. The TE Connectivity 60619-7 carries "Not applicable" RoHS status and "Vendor Undefined" REACH status.