Equivalent & Substitute Parts: API Delevan Inc. 6017-036

Part Overview

The 6017-036 is a laminated core power transformer rated at 36VA with a 115V primary voltage and dual secondary windings capable of 18V parallel or 36V series output. This through-hole mounted component is designed for applications requiring moderate power distribution and voltage conversion in industrial and electronic equipment. The 6017-036 is currently obsolete, necessitating identification of active substitute components that maintain electrical and mechanical compatibility with existing circuit designs.

Substiute Parts

6017-036

API Delevan Inc.In Stock: 10946017-036 Datasheet

Current PartRFQ

6017R-036

API Delevan Inc.In Stock: 11576017R-036 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the 6017-036 must satisfy the following critical electrical and mechanical parameters to ensure functional equivalence:

Electrical Parameters:

• Voltage - Primary: 115V
• Voltage - Secondary (Full Load): Parallel 18V, Series 36V
• Current - Output (Max): Parallel 2A, Series 1A
• Power - Max: 36VA
• Voltage - Isolation: 2500Vrms
• Primary Winding(s): Single
• Secondary Winding(s): Dual
• Center Tap: No

Mechanical Parameters:

• Mounting Type: Through Hole
• Termination Style: PC Pin
• Type: Laminated Core
• Size / Dimension: 66.68mm L x 55.55mm W
• Height - Seated (Max): 39.67mm

Substitute parts must conform to these specifications to maintain compatibility with existing printed circuit board layouts and circuit performance requirements.

Parameter Comparison

Engineering Selection Recommendations

The 6017R-036 serves as the direct substitute for the obsolete 6017-036. Both components are manufactured by API Delevan Inc. and are electrically and mechanically identical across all critical parameters. The primary distinction is product status and regulatory compliance: the 6017-036 is obsolete and RoHS non-compliant, while the 6017R-036 is active and ROHS3 compliant. For applications in regulated industries or requiring environmental compliance certification, the 6017R-036 is the appropriate selection. The identical physical dimensions, electrical ratings, and mounting specifications ensure direct substitution without circuit board redesign.

Frequently Asked Questions (FAQ)

Q: Can the 6017R-036 replace the 6017-036 in existing designs?

A: Yes. The 6017R-036 is a direct electrical and mechanical substitute. Identical primary voltage (115V), secondary voltage configurations (parallel 18V or series 36V), power rating (36VA), isolation voltage (2500Vrms), physical dimensions (66.68mm L x 55.55mm W x 39.67mm H), and through-hole PC pin termination enable direct replacement without circuit modification.

Q: What is the impact of the RoHS compliance difference?

A: The 6017-036 is RoHS non-compliant, while the 6017R-036 is ROHS3 compliant. For applications subject to environmental or regulatory requirements, the 6017R-036 is mandated. For legacy or non-regulated applications, either component satisfies electrical requirements.

Q: Are the physical dimensions identical?

A: Yes. Both the 6017-036 and 6017R-036 maintain identical dimensions of 66.68mm length x 55.55mm width with a maximum seated height of 39.67mm, ensuring compatibility with existing through-hole mounting footprints.

Q: What are the available output configurations?

A: The dual secondary winding design supports two output modes: parallel 18V at 2A maximum current, or series 36V at 1A maximum current. Both configurations deliver the rated 36VA power output.

Q: What isolation voltage is maintained across the transformer?

A: Both components provide 2500Vrms voltage isolation between primary and secondary windings, suitable for applications requiring galvanic isolation and electrical safety separation.