API Delevan 6013-010 Equivalent & Substitute Parts

Part Overview

The API Delevan 6013-010 is a laminated core power transformer rated at 2.4VA with dual secondary windings configured for parallel (5V, 500mA) or series (10V, 250mA) output. This through-hole mounted component features a single primary winding at 115V and 2500Vrms isolation voltage. The product is classified as obsolete, necessitating identification of equivalent alternatives for ongoing system support and new design implementations.

Substiute Parts

6013-010

API Delevan Inc.In Stock: 8306013-010 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

No substitute parts have been provided in the input data. Equivalent alternatives for the 6013-010 must be identified based on the following critical parameters that define functional interchangeability:

Primary Selection Criteria:

• Power rating: 2.4VA
• Primary voltage: 115V single winding
• Secondary configuration: Dual windings with parallel (5V, 500mA) and series (10V, 250mA) capability
• Isolation voltage: 2500Vrms minimum
• Mounting: Through-hole with PC pin termination
• Physical envelope: 34.93mm L x 28.58mm W x 30.15mm H maximum

Substitute components must match all electrical specifications and physical constraints to ensure direct replacement without circuit redesign or PCB modification.

Parameter Comparison

No substitute parts are available for comparison at this time. When substitute components are identified, comparison will include electrical ratings, isolation specifications, mounting compatibility, and physical dimensions.

Engineering Selection Recommendations

The 6013-010 is classified as obsolete. Component selection for replacement applications must prioritize:

Electrical Compatibility: Substitute transformers must deliver identical voltage and current ratings across both parallel and series secondary configurations to maintain circuit functionality.

Isolation Requirements: The 2500Vrms isolation specification is a critical safety parameter. Replacement components must meet or exceed this rating.

Mechanical Fit: Through-hole mounting with PC pin termination and dimensional constraints (34.93mm x 28.58mm x 30.15mm) must be preserved to avoid PCB redesign.

Compliance Considerations: The original 6013-010 is RoHS non-compliant. Modern replacements may require RoHS-compliant alternatives, which may necessitate design review and validation.

Frequently Asked Questions (FAQ)

Q: What makes a transformer equivalent to the 6013-010?

A: Electrical equivalence requires matching power rating (2.4VA), primary voltage (115V), dual secondary windings with parallel 5V/500mA and series 10V/250mA outputs, 2500Vrms isolation, and through-hole PC pin mounting within the specified physical envelope.

Q: Can I use a transformer with higher power rating as a substitute?

A: Higher power ratings do not guarantee compatibility. The substitute must deliver the exact voltage and current specifications. Physical dimensions and mounting style must also match to prevent PCB modification.

Q: Does the obsolete status affect substitute selection?

A: Yes. Obsolete components may have limited availability. Substitutes must be functionally identical across all electrical and mechanical parameters. RoHS compliance status should be evaluated for new designs.

Q: What is the significance of the 2500Vrms isolation voltage?

A: Isolation voltage specifies the maximum voltage that can be safely applied between primary and secondary windings. This is a safety-critical parameter. Substitutes must meet or exceed this specification.

Q: Are there dimensional constraints for mounting?

A: Yes. The 6013-010 has specific through-hole mounting dimensions (34.93mm x 28.58mm x 30.15mm). Substitutes must fit within these constraints or require PCB redesign.