E-Switch 600DP1S2M2R Equivalent & Substitute Parts

Part Overview

The E-Switch 600DP1S2M2R is a slide switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 0.4VA at 20V AC/DC. This through-hole mounted component features gold-plated copper alloy contacts, IP67 dust and water protection, and is designed for On-On switching applications. The part is Active status and RoHS3 compliant with unlimited moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching circuit topology (DPDT), switching function (On-On), mounting type (through-hole PC pin termination), and electrical performance within acceptable operational ranges. Substitutes may vary in current rating, voltage rating, actuator dimensions, contact material finish, and mechanical/electrical life specifications.

Substiute Parts

600DP1S2M2R

E-SwitchIn Stock: 1172600DP1S2M2R Datasheet

Current PartRFQ

1201M2S1CQE2

C&KIn Stock: 13531201M2S1CQE2 Datasheet

MFR RecommendedRFQ

1201M2S3CBE2

C&KIn Stock: 20931201M2S3CBE2 Datasheet

MFR RecommendedRFQ

1201M2S3CQE2

C&KIn Stock: 31491201M2S3CQE2 Datasheet

MFR RecommendedRFQ

CS22BNW03

NKK SwitchesIn Stock: 7259CS22BNW03 Datasheet

MFR RecommendedRFQ

SS22SDP2LC

NKK SwitchesIn Stock: 1029SS22SDP2LC Datasheet

MFR RecommendedRFQ

SS22SDP2LE

NKK SwitchesIn Stock: 773SS22SDP2LE Datasheet

MFR RecommendedRFQ

SS22SDP2LF

NKK SwitchesIn Stock: 814SS22SDP2LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic is based on the following criteria:

Primary Matching Criteria:

• Circuit configuration: DPDT
• Switch function: On-On
• Mounting type: Through Hole with PC Pin termination
• RoHS3 compliance and REACH unaffected status

Acceptable Variation Parameters:

• Current rating: Substitutes may exceed 0.4VA specification
• Voltage rating: Substitutes must meet or exceed 20V AC/DC minimum
• Actuator length: Varies by design (1.02mm to 5.08mm)
• Contact material and finish: Copper or Copper Alloy with Gold or Silver finish
• Mechanical/Electrical life: May differ from 20,000 cycles
• Operating temperature: May have narrower or wider range than -40°C ~ 80°C

Substitute Parts Identified:

• 1201M2S1CQE2 (C&K): Higher current (6A) and voltage (120V AC / 28V DC) rating
• 1201M2S3CBE2 (C&K): Matched electrical rating (0.4VA, 20V), higher electrical life (100,000 cycles)
• 1201M2S3CQE2 (C&K): Higher current (6A) and voltage (120V AC / 28V DC) rating
• CS22BNW03 (NKK Switches): Higher current (3A) and voltage (125V AC) rating, non-shorting contact timing
• SS22SDP2LC, SS22SDP2LE, SS22SDP2LF (NKK Switches): Lower current (100mA) and voltage (30V DC) rating, illuminated actuator

Parameter Comparison

Engineering Selection Recommendations

Direct Electrical Equivalent: 1201M2S3CBE2 (C&K) matches the 0.4VA and 20V electrical specification of the 600DP1S2M2R. This substitute offers extended electrical life (100,000 cycles versus 20,000 cycles) and maintains gold contact finish. Operating temperature range is narrower (-30°C ~ 65°C). Both parts are Active status and RoHS3 compliant.

Higher Current/Voltage Capability: 1201M2S1CQE2 and 1201M2S3CQE2 (C&K) provide 6A at 120V AC / 28V DC, suitable for applications requiring higher power handling. CS22BNW03 (NKK Switches) provides 3A at 125V AC with non-shorting contact timing and extended mechanical life (50,000 cycles). All maintain RoHS3 compliance and Active product status.

Lower Current/Voltage Applications: SS22SDP2LC, SS22SDP2LE, and SS22SDP2LF (NKK Switches) are rated for 100mA at 30V DC with illuminated actuators. These are suitable only for low-power signal switching applications. Operating temperature range is restricted to -15°C ~ 60°C, and mechanical/electrical life is reduced to 10,000 cycles.

All identified substitutes maintain DPDT circuit configuration, On-On switching function, through-hole PC pin termination, and RoHS3 compliance with REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can 1201M2S3CBE2 directly replace 600DP1S2M2R? A: Yes. Both parts share identical electrical ratings (0.4VA, 20V AC/DC), DPDT circuit, On-On function, through-hole PC pin termination, and gold contact finish. The primary difference is operating temperature range: 600DP1S2M2R operates -40°C ~ 80°C while 1201M2S3CBE2 operates -30°C ~ 65°C. Verify application temperature requirements before substitution.

Q: What is the difference between the C&K and NKK substitute options? A: C&K parts (1201M2S series) are available in two electrical configurations: matched to the original 0.4VA/20V specification (1201M2S3CBE2) or higher capacity 6A/120V (1201M2S1CQE2, 1201M2S3CQE2). NKK Switches offers CS22BNW03 at 3A/125V with non-shorting contact timing, and SS22SDP2 series at 100mA/30V with illuminated actuators. Select based on application power requirements.

Q: Are the SS22SDP2 series suitable replacements? A: SS22SDP2LC, SS22SDP2LE, and SS22SDP2LF are suitable only for low-power applications requiring 100mA maximum at 30V DC. These parts feature illuminated actuators and reduced mechanical/electrical life (10,000 cycles). Operating temperature is limited to -15°C ~ 60°C. Do not use in applications exceeding these specifications.

Q: What does "contact timing" mean in the parameter comparison? A: Contact timing describes the switching sequence. The 600DP1S2M2R has unspecified contact timing. CS22BNW03 uses non-shorting (BBM) timing, meaning contacts break before making. SS22SDP2 series use shorting (MBB) timing, meaning contacts make before breaking. This affects circuit behavior during switching transitions.

Q: Do all substitutes maintain the same packaging? A: No. 600DP1S2M2R is supplied in Bulk packaging. C&K parts (1201M2S series) are Bulk. CS22BNW03 (NKK Switches) is supplied in Tray packaging. SS22SDP2 series are Bulk. Verify packaging requirements for your procurement and assembly processes.

Q: Are all substitutes RoHS3 compliant? A: Yes. All identified substitute parts are RoHS3 compliant and REACH unaffected, matching the compliance status of 600DP1S2M2R.