E-Switch 600DP1S2M2Q Equivalent & Substitute Parts

Part Overview

The E-Switch 600DP1S2M2Q is a slide switch with DPDT (Double Pole Double Throw) configuration rated for 1A DC at 30V. This through-hole mounted component features IP67 dust-tight and waterproof protection, making it suitable for applications requiring environmental sealing. The part is currently active in production with 809 units in stock. Substitute parts may be required due to design changes, application-specific parameter needs, or supply chain considerations.

Substiute Parts

600DP1S2M2Q

E-SwitchIn Stock: 823600DP1S2M2Q Datasheet

Current PartRFQ

1201M2S1CQE2

C&KIn Stock: 13531201M2S1CQE2 Datasheet

MFR RecommendedRFQ

1201M2S3CBE2

C&KIn Stock: 20931201M2S3CBE2 Datasheet

MFR RecommendedRFQ

1201M2S3CQE2

C&KIn Stock: 31491201M2S3CQE2 Datasheet

MFR RecommendedRFQ

CS22BNW03

NKK SwitchesIn Stock: 7259CS22BNW03 Datasheet

MFR RecommendedRFQ

SS22SDP2LC

NKK SwitchesIn Stock: 1029SS22SDP2LC Datasheet

MFR RecommendedRFQ

SS22SDP2LE

NKK SwitchesIn Stock: 773SS22SDP2LE Datasheet

MFR RecommendedRFQ

SS22SDP2LF

NKK SwitchesIn Stock: 814SS22SDP2LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 600DP1S2M2Q is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration must be DPDT
• Switch function must be On-On
• Mounting type must be Through Hole
• Termination style must be PC Pin
• Voltage rating (DC) must meet or exceed 30V
• Current rating must meet or exceed 1A DC
• RoHS3 compliance required

Secondary Considerations:

• Contact material and finish compatibility
• Operating temperature range adequacy
• Mechanical and electrical life ratings
• Actuator type and length variations

The substitute parts listed below meet the primary compatibility criteria while offering variations in current capacity, voltage ratings, and contact materials that may suit specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

C&K 1201M2S1CQE2 and 1201M2S3CQE2: These parts exceed the current and voltage specifications of the 600DP1S2M2Q, offering 6A AC/DC capability at 120V AC and 28V DC. Both are ROHS3 compliant and active products. The 1201M2S3CQE2 variant features a longer actuator (5.08mm) compared to the 1201M2S1CQE2 (1.02mm). Selection depends on actuator length requirements for your application.

C&K 1201M2S3CBE2: This part provides lower current and voltage ratings (0.4VA at 20V DC) with gold-plated contacts and extended electrical life (100,000 cycles). It is suitable for low-power signal switching applications where contact reliability over extended cycle life is critical. ROHS3 compliant and active.

NKK Switches CS22BNW03: This part offers 3A AC at 125V with non-shorting contact timing (BBM). It provides higher mechanical life (50,000 cycles) and extended operating temperature range (-30°C to 85°C). ROHS3 compliant and active. Suitable for AC-dominant applications requiring enhanced durability.

NKK Switches SS22SDP2LF, SS22SDP2LE, SS22SDP2LC: These parts are rated for 100mA DC at 30V with illuminated actuators and shorting contact timing (MBB). They feature phosphor bronze contacts and lower mechanical/electrical life (10,000 cycles each). These are suitable only for low-current applications and are not direct replacements for 1A DC requirements. ROHS3 compliant and active.

All substitute parts maintain ROHS3 compliance and active product status, ensuring regulatory alignment and supply continuity.

Frequently Asked Questions (FAQ)

Q: Can the SS22SDP2LF, SS22SDP2LE, or SS22SDP2LC be used as direct replacements for the 600DP1S2M2Q?

A: No. These NKK Switches parts are rated for 100mA DC maximum, which is insufficient for the 600DP1S2M2Q's 1A DC requirement. They are suitable only for low-current signal switching applications. Use only if your application current demand is 100mA or less.

Q: What is the difference between the C&K 1201M2S1CQE2 and 1201M2S3CQE2?

A: Both parts are rated 6A AC/DC at 120V AC and 28V DC with identical electrical specifications. The primary difference is actuator length: 1201M2S1CQE2 has a 1.02mm actuator, while 1201M2S3CQE2 has a 5.08mm actuator. Select based on your PCB layout and actuator accessibility requirements.

Q: Does the C&K 1201M2S3CBE2 meet the current requirements of the 600DP1S2M2Q?

A: No. The 1201M2S3CBE2 is rated for 0.4VA AC/DC, which is below the 1A DC requirement. This part is intended for low-power signal switching where extended electrical life (100,000 cycles) and gold-plated contacts are beneficial. Use only if your application current is 0.4A or less.

Q: What are the key differences between contact timing options?

A: The 600DP1S2M2Q does not specify contact timing. The NKK Switches SS series parts feature shorting contact timing (MBB), while the CS22BNW03 features non-shorting contact timing (BBM). Shorting timing briefly connects both poles during switching; non-shorting timing breaks one connection before making the other. Select based on your circuit's switching transient tolerance.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and meet the same regulatory requirements as the 600DP1S2M2Q.

Q: Which substitute part offers the best mechanical durability?

A: The NKK Switches CS22BNW03 offers the highest mechanical life rating at 50,000 cycles, compared to the 600DP1S2M2Q's 20,000 cycles. This part is suitable for applications requiring extended mechanical reliability.

Q: Can I use a substitute part rated for AC voltage in a DC-only application?

A: Parts rated for both AC and DC (such as the C&K 1201M2S1CQE2 and 1201M2S3CQE2) are suitable for DC applications within their DC voltage rating. The 600DP1S2M2Q is DC-only; ensure any substitute meets or exceeds the 30V DC requirement for your specific application.