Keystone Electronics 6000 Tip Plug Connector - Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 6000 is a solderless tip plug connector designed for standard tip applications. This male connector features a white polyamide body with nickel-plated brass contacts and is rated for 100°C operating temperature. The part is currently active in production with 53,797 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, lead time considerations, or specific application requirements.

Substiute Parts

6000

Keystone ElectronicsIn Stock: 538216000 Datasheet

Current PartRFQ

105-0301-001

Cinch Connectivity SolutionsIn Stock: 1722105-0301-001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Keystone Electronics 6000 is determined by the following critical parameters:

• Connector Type & Gender: Tip Plug, Male configuration
• Plug Diameter: Standard Tip specification
• Termination Method: Solderless connection
• Wire Gauge: 16 AWG
• Contact Material & Finish: Brass with Nickel plating
• Body Material: Polyamide (PA66), Nylon 6/6
• Color: White
• Regulatory Compliance: ROHS3 Compliant

The substitute part Cinch Connectivity Solutions 105-0301-001 meets all critical electrical and mechanical parameters. Variations in insulation location (mating end vs. non-mating end) and operating temperature range do not affect functional interchangeability for standard tip plug applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Keystone Electronics 6000 and Cinch Connectivity Solutions 105-0301-001 are active production parts with ROHS3 compliance. Selection between these parts is based on application requirements and inventory availability.

The Keystone 6000 is specified for applications requiring 100°C operating temperature capability. The Cinch 105-0301-001 is rated to 85°C maximum and is suitable for applications within this temperature range. Both parts share identical electrical and mechanical specifications for connector type, gender, plug diameter, termination method, wire gauge, contact material, and body material.

The difference in insulation location (mating end vs. non-mating end) reflects design variations between manufacturers and does not affect functional interchangeability in standard tip plug applications.

Frequently Asked Questions (FAQ)

Q: Can Cinch 105-0301-001 be used as a direct replacement for Keystone 6000?

A: Yes, for applications operating at or below 85°C. Both parts are solderless tip plugs with identical wire gauge (16 AWG), contact material (brass with nickel finish), body material (polyamide), and standard tip diameter. If your application requires sustained operation above 85°C, the Keystone 6000 is the appropriate selection.

Q: What is the difference between mating end insulation and non-mating end insulation?

A: Mating end insulation (Keystone 6000) provides insulation at the connection point. Non-mating end insulation (Cinch 105-0301-001) provides insulation at the wire termination end. Both configurations are standard in tip plug connector design and do not affect interchangeability for typical applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the Keystone 6000 and Cinch 105-0301-001 are ROHS3 compliant.

Q: What packaging is available for the substitute part?

A: The Cinch 105-0301-001 is supplied in bulk packaging with 1,655 units in stock.

Q: Do both parts use the same wire gauge?

A: Yes. Both parts are rated for 16 AWG wire.