LED TURQUOISE CLEAR T-1 3/4 T/H 5UTC Equivalent & Substitute Parts

Part Overview

The Bivar Inc. 5UTC is a turquoise LED indication component designed for through-hole mounting applications. This discrete 3.5V radial LED features a 5mm T-1 3/4 form factor with a clear, domed lens and 600mcd brightness rating. The product is classified as obsolete, necessitating identification of functionally equivalent substitute components for ongoing design support and procurement continuity.

Substiute Parts

5UTC

Bivar Inc.In Stock: 7495UTC Datasheet

Current PartRFQ

MV8G03

onsemiIn Stock: 1032MV8G03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the 5UTC are identified based on the following critical parameters that determine functional compatibility:

Mechanical Compatibility:

• Lens size: 5mm, T-1 3/4 form factor
• Mounting type: Through-hole radial configuration
• Lens style: Round with domed top
• Lens transparency: Clear

Electrical Compatibility:

• Forward voltage (Vf): 3.5V nominal operation
• Test current: 20mA standard
• Viewing angle: 20° narrow beam
• Package classification: Radial

Environmental & Regulatory:

• Moisture Sensitivity Level: 1 (Unlimited)
• ECCN: EAR99
• HTSUS: 8541.41.0000

The onsemi MV8G03 meets the mechanical and electrical compatibility criteria for through-hole LED indication applications with identical form factor and mounting configuration. Substitution is valid where color differentiation does not compromise circuit function or system requirements.

Parameter Comparison

Engineering Selection Recommendations

Mechanical Fit: The MV8G03 maintains identical T-1 3/4 form factor and through-hole radial mounting configuration. Maximum height differential is 0.39mm (8.89mm vs. 8.50mm), which remains within standard PCB clearance tolerances for typical through-hole applications.

Electrical Operation: Forward voltage differential is 0.1V (3.6V vs. 3.5V), requiring circuit verification to confirm series resistor values remain appropriate for the substitute component. Test current specification is identical at 20mA.

Optical Characteristics: Peak wavelength separation is 2nm (502nm vs. 500nm), representing negligible spectral shift. Millicandela rating differential (3500mcd vs. 600mcd) indicates significantly higher brightness in the substitute component. Color differentiation (blue vs. turquoise) must be evaluated against application requirements.

Regulatory Compliance: Both components share identical ECCN (EAR99), HTSUS classification (8541.41.0000), and MSL rating (1 - Unlimited), confirming equivalent regulatory and environmental handling requirements.

Product Status: Both components are classified as obsolete. Long-term availability should be confirmed with authorized distributors prior to design commitment.

Frequently Asked Questions (FAQ)

Q: Can the MV8G03 be used as a direct replacement for the 5UTC in existing designs?

A: Mechanical and electrical compatibility is confirmed for through-hole mounting applications. Circuit verification is required to validate series resistor values for the 0.1V forward voltage differential. Color change from turquoise to blue must be acceptable for the application.

Q: What is the significance of the 2900mcd brightness difference between these components?

A: The MV8G03 provides substantially higher luminous intensity (3500mcd vs. 600mcd). Applications requiring specific brightness levels must evaluate whether increased brightness is acceptable or requires circuit modification to reduce operating current.

Q: Are there dimensional compatibility concerns?

A: Maximum height difference is 0.39mm (8.89mm vs. 8.50mm). Standard PCB through-hole designs accommodate this variance. Verify clearance in applications with height-constrained layouts.

Q: Do both components require identical handling and storage procedures?

A: Yes. Both components share MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions. Handling and storage procedures are equivalent.

Q: What wavelength difference exists between these LEDs?

A: Peak wavelength separation is 2nm (502nm vs. 500nm). This represents negligible spectral shift and does not affect optical filtering or color perception in standard indication applications.

Q: Is the forward voltage difference critical for circuit design?

A: The 0.1V differential (3.6V vs. 3.5V) requires verification of series resistor calculations to confirm adequate current limiting and brightness control. Recalculation is recommended for precision applications.