Stratix® V E FPGA 5SEEBF45C3N Equivalent & Substitute Parts

Part Overview

The 5SEEBF45C3N is an Intel Stratix® V E Field Programmable Gate Array (FPGA) featuring 840 I/O pins, 952,000 logic elements, and 53.248 MB of embedded RAM. This device is packaged in a 1932-BBGA, FCBGA format with a 45x45mm footprint. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and procurement planning.

Substiute Parts

5SEEBF45C3N

IntelIn Stock: 11055SEEBF45C3N Datasheet

Current PartRFQ

5SEEBF45C3G

IntelIn Stock: 11555SEEBF45C3G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5SEEBF45C3N is determined by strict equivalence across the following critical parameters:

• Series and Architecture: Must be Stratix® V E to ensure design compatibility and tool support
• Logic Capacity: 952,000 logic elements (fixed requirement)
• I/O Count: 840 I/O pins (fixed requirement)
• Embedded Memory: 53,248,000 RAM bits (fixed requirement)
• Package Format: 1932-BBGA, FCBGA with 45x45mm footprint (fixed requirement)
• Supply Voltage: 0.82V ~ 0.88V (fixed requirement)
• Operating Temperature Range: 0°C ~ 85°C (TJ) (fixed requirement)
• Compliance: RoHS Compliant status and MSL rating

The 5SEEBF45C3G qualifies as a direct substitute based on identical electrical specifications, package format, and functional capacity. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The 5SEEBF45C3G is the direct equivalent substitute for the 5SEEBF45C3N. Both parts are identical in electrical performance, logic capacity, I/O configuration, and package format. The 5SEEBF45C3G is currently in active production status, whereas the 5SEEBF45C3N is obsolete. Selection of the 5SEEBF45C3G is appropriate for new designs and ongoing procurement where the 5SEEBF45C3N is no longer available. Both parts maintain RoHS compliance and identical MSL ratings, ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can the 5SEEBF45C3G be used as a direct replacement for the 5SEEBF45C3N in existing designs?

A: Yes. The 5SEEBF45C3G is electrically and functionally identical to the 5SEEBF45C3N. All electrical parameters, logic capacity, I/O count, memory configuration, and package format are equivalent. No design modifications are required.

Q: What is the difference between the 5SEEBF45C3N and 5SEEBF45C3G?

A: The primary differences are product status and packaging configuration. The 5SEEBF45C3N is obsolete and supplied in bulk packaging, while the 5SEEBF45C3G is active and supplied in tray packaging. Electrical and functional specifications are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are RoHS Compliant with identical Moisture Sensitivity Level (MSL) ratings of 3 (168 Hours). Both meet the same environmental and regulatory requirements.

Q: What is the significance of the packaging difference (bulk vs. tray)?

A: Packaging configuration affects handling, storage, and logistics. Tray packaging (5SEEBF45C3G) provides better protection during transport and storage, and is standard for active production parts. Bulk packaging (5SEEBF45C3N) was used for the obsolete variant. The electrical and functional performance of the device is unaffected by packaging type.

Q: Can the 5SEEBF45C3G be used in high-temperature applications?

A: Both parts operate within the same temperature range of 0°C ~ 85°C (TJ). Applications requiring operation outside this range require alternative device selection.