Bivar Inc. 5PGC LED Green Clear T-1 3/4 Through Hole

Part Overview

The Bivar Inc. 5PGC is a green LED indicator in T-1 3/4 (5mm) through-hole packaging with a clear, domed lens. This component is rated at 10 millicandelas with a forward voltage of 2.2V and a dominant wavelength of 555nm. The product status is obsolete, making equivalent substitute parts necessary for new designs and ongoing maintenance applications where green LED indication functionality is required.

Substiute Parts

5PGC

Bivar Inc.In Stock: 11275PGC Datasheet

Current PartRFQ

5GC

Bivar Inc.In Stock: 10235GC Datasheet

SimilarRFQ

5219201F

DialightIn Stock: 11835219201F Datasheet

SimilarRFQ

LTL-4238

Lite-On Inc.In Stock: 11193LTL-4238 Datasheet

SimilarRFQ

LTL2P3KGKNN

Lite-On Inc.In Stock: 22923LTL2P3KGKNN Datasheet

SimilarRFQ

MV3450

onsemiIn Stock: 1028MV3450 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Bivar Inc. 5PGC are qualified based on electrical and mechanical parameters that ensure functional equivalence in green LED indication applications. The primary substitution criteria include:

Electrical Compatibility: Forward voltage within 2.1V to 2.2V range, test current of 10mA to 20mA, and wavelength in the green spectrum (555nm to 575nm). These parameters ensure the LED will operate correctly in circuits designed for the 5PGC.

Mechanical Compatibility: T-1 3/4 (5mm) lens size, round domed top lens style, clear lens transparency, through-hole radial mounting, and maximum height between 8.50mm to 8.70mm. These dimensions confirm physical fit within the intended PCB layout and enclosure.

Environmental & Compliance: Moisture Sensitivity Level 1 (Unlimited) and RoHS3 compliance status confirm suitability for standard industrial and commercial applications.

The substitute parts are grouped into two categories: direct electrical substitutes with slightly higher brightness ratings (40mcd to 90mcd) and direct electrical substitutes with significantly higher brightness ratings (150mcd to 980mcd). All qualified substitutes share the T-1 3/4 form factor and basic electrical characteristics necessary to replace the obsolete 5PGC in operational circuits.

Parameter Comparison

Engineering Selection Recommendations

Active Product Preference: Select from 5GC, LTL-4238, LTL2P3KGKNN, and 5219201F, which all carry Active product status and RoHS3 compliance certification. These parts are supported by manufacturers and suitable for new designs.

Voltage Compatibility: The 5PGC operates at 2.2V forward voltage. Substitute parts 5GC and MV3450 share this voltage rating. Substitute parts LTL-4238, LTL2P3KGKNN, and 5219201F operate at 2.1V, a 0.1V difference that is within typical circuit tolerance for LED applications. Verify circuit current limiting design to confirm compatibility.

Brightness Consideration: The 5PGC provides 10mcd output. All substitute parts offer equal or greater brightness (40mcd minimum), enabling reduced viewing angle or increased visibility distance. For applications requiring matched brightness levels, select substitute parts closest in mcd rating to the original design intent.

Form Factor Alignment: All substitute parts maintain T-1 3/4 (5mm) through-hole radial mounting with clear domed lenses and heights within 8.50mm to 8.89mm, confirming direct mechanical substitution capability.

Frequently Asked Questions (FAQ)

Q: Can the 5PGC be directly replaced with any of these substitute parts? A: Yes, all listed substitute parts are electrically and mechanically compatible as direct replacements for the obsolete 5PGC. All maintain T-1 3/4 form factor, through-hole radial mounting, clear doming, and green spectral characteristics.

Q: What is the voltage difference between the 5PGC and most substitute parts? A: The 5PGC operates at 2.2V forward voltage. Most substitutes (5GC, LTL-4238, LTL2P3KGKNN, 5219201F) operate at 2.1V. This 0.1V difference is within standard circuit tolerance for LED indicator applications. Current limiting resistor values may require minor adjustment based on the specific circuit design.

Q: Does increased brightness affect compatibility? A: Substitute parts offer brightness ratings from 40mcd to 980mcd compared to the 5PGC's 10mcd. Higher brightness is electrically compatible but may alter circuit behavior if brightness sensing or dimming is implemented. For direct drop-in replacement without circuit modification, any substitute part operates correctly at the specified test current.

Q: Are all substitute parts RoHS3 compliant? A: The active status substitute parts (5GC, LTL-4238, LTL2P3KGKNN, 5219201F) are RoHS3 compliant. Compliance status is not specified for the obsolete MV3450. For applications requiring RoHS3 compliance, select from the active status parts.

Q: How do viewing angles differ among substitute options? A: Viewing angles range from 16° (LTL-4238) to 35° (5GC and 5PGC). Narrower viewing angles concentrate light intensity in a specific direction; wider angles distribute light across a broader field. Select based on the intended application's spatial requirements and visibility expectations.

Q: What is the preferred substitute if an exact replacement is required? A: The 5GC offers the closest match to the 5PGC with identical 8.50mm height, same 35° viewing angle, and equivalent 2.1V forward voltage. The 5GC is active status with RoHS3 compliance, making it the recommended primary substitute for direct replacement applications.