5KP60A-TP Transient Voltage Suppressor Equivalent & Substitute Parts

Part Overview

The 5KP60A-TP is an active, through-hole mounted unidirectional Zener transient voltage suppressor (TVS) diode manufactured by Micro Commercial Co. This component is designed for general-purpose transient voltage suppression applications with a 60V reverse standoff voltage rating and 5000W peak pulse power handling capability. The part is packaged in R-6 axial configuration and supplied on tape and reel. Finding equivalent or substitute parts may be necessary due to inventory availability, lead time requirements, or application-specific packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

5KP60A-TP

Micro Commercial CoIn Stock: 7295KP60A-TP Datasheet

Current PartRFQ

5KP60A

Diotec SemiconductorIn Stock: 41785KP60A Datasheet

DirectRFQ

15KPA60A

MDE Semiconductor IncIn Stock: 148315KPA60A Datasheet

SimilarRFQ

30KPA60A

MDE Semiconductor IncIn Stock: 206030KPA60A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5KP60A-TP are classified based on strict electrical and mechanical parameter alignment:

Direct Equivalent (5KP60A by Diotec Semiconductor): Maintains identical voltage ratings (60V reverse standoff, 66.7V breakdown minimum, 96.8V clamping maximum) and power rating (5000W peak pulse). Differs in package designation (P600 vs. R-6) and packaging format (tape and reel vs. tape and reel), but both are through-hole axial configurations suitable for the same circuit board layouts.

Higher Power Alternatives (15KPA60A and 30KPA60A by MDE Semiconductor Inc): Share the same 60V reverse standoff voltage and similar voltage breakdown/clamping characteristics (67V minimum breakdown, 97.4V to 102V clamping maximum). These parts feature significantly higher peak pulse current handling (155A and 297.1A respectively) and proportionally higher power ratings (15kW and 30kW). Both use P600 axial package format and are supplied in bulk packaging. These are suitable for applications requiring enhanced transient energy absorption beyond the 5kW baseline.

All substitute parts maintain unidirectional Zener topology, through-hole mounting, ROHS3 compliance, and general-purpose application suitability.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution: The 5KP60A by Diotec Semiconductor provides electrical equivalence with identical voltage and power specifications. Both parts are active products with ROHS3 compliance. Selection between R-6 and P600 axial packages depends on board layout and mechanical fit requirements; both are standard through-hole formats.

For Enhanced Transient Protection: The 15KPA60A and 30KPA60A offer higher peak pulse power handling (15kW and 30kW respectively) while maintaining the 60V voltage class. These are suitable for applications experiencing higher transient energy levels. Both are active products with ROHS3 compliance and -55°C to 175°C operating temperature range matching the original specification.

Compliance Considerations: All substitute parts maintain ROHS3 compliance and active product status. The Diotec 5KP60A operates at -50°C minimum temperature versus -55°C for the original and higher-power alternatives; verify this difference against application requirements if low-temperature operation is critical.

Frequently Asked Questions (FAQ)

Q: Can the 5KP60A by Diotec Semiconductor be used as a direct replacement for the 5KP60A-TP?

A: Yes. Both parts share identical voltage ratings (60V reverse standoff, 66.7V breakdown minimum, 96.8V clamping maximum) and power rating (5000W peak pulse). The primary difference is the axial package designation (P600 vs. R-6) and packaging format. Verify mechanical fit on your circuit board layout.

Q: What is the difference between the 5KP60A and the 15KPA60A or 30KPA60A?

A: The 15KPA60A and 30KPA60A are higher-power variants within the 60V voltage class. They maintain the same 60V reverse standoff voltage but handle significantly more transient energy (15kW and 30kW versus 5kW). Peak pulse current ratings increase proportionally (155A and 297.1A). Use these only if your application requires enhanced transient suppression capability beyond the 5kW baseline.

Q: Are there temperature range differences between substitute parts?

A: The Diotec 5KP60A operates from -50°C to 175°C, while the original 5KP60A-TP and MDE alternatives (15KPA60A, 30KPA60A) operate from -55°C to 175°C. If your application requires operation below -50°C, select the original or MDE parts.

Q: Do all substitute parts meet RoHS compliance?

A: Yes. All listed substitute parts are ROHS3 compliant, matching the original 5KP60A-TP specification.

Q: Can I use a higher-power part (15KPA60A or 30KPA60A) in place of the 5KP60A-TP?

A: Yes, from an electrical standpoint. Higher-power TVS diodes provide enhanced transient suppression without compromising circuit protection. However, verify that the P600 axial package fits your board layout, and confirm that bulk packaging meets your supply chain requirements.

Q: What packaging differences exist between these parts?

A: The 5KP60A-TP and Diotec 5KP60A are supplied on tape and reel. The 15KPA60A and 30KPA60A are supplied in bulk packaging. All use through-hole axial mounting. Packaging format affects handling, storage, and automated assembly compatibility.