Equivalent & Substitute Parts for 5HP01SS-TL-E

Part Overview

The 5HP01SS-TL-E is a P-channel MOSFET manufactured by onsemi, rated for 50V drain-to-source voltage with 70mA continuous drain current in a 3-SSFP surface mount package. This device is classified as obsolete, necessitating identification of active substitute components that maintain electrical and mechanical compatibility for new designs and production continuity.

Substiute Parts

5HP01SS-TL-E

onsemiIn Stock: 482875HP01SS-TL-E Datasheet

Current PartRFQ

BSS84

Good-Ark SemiconductorIn Stock: 359259BSS84 Datasheet

SimilarRFQ

BSS84LT1G

onsemiIn Stock: 272131BSS84LT1G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5HP01SS-TL-E are selected based on the following electrical and mechanical parameters:

Electrical Compatibility Criteria:

• FET Type: P-Channel
• Drain to Source Voltage (Vdss): 50V (minimum requirement)
• Current - Continuous Drain (Id): Equal to or greater than 70mA
• Technology: MOSFET (Metal Oxide)

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount
• Package Classification: 3-pin surface mount configuration

Regulatory & Environmental Criteria:

• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected
• RoHS Compliance: ROHS3 Compliant

The identified substitutes (BSS84 and BSS84LT1G) meet or exceed all electrical parameters while maintaining surface mount compatibility. Both devices are active products with higher continuous drain current ratings (130mA) and equivalent voltage specifications, ensuring functional replacement capability.

Parameter Comparison

Engineering Selection Recommendations

BSS84LT1G (Primary Substitute)

The BSS84LT1G is the preferred substitute for the 5HP01SS-TL-E. This device is manufactured by onsemi, the original manufacturer of the obsolete part, ensuring design continuity and process consistency. The BSS84LT1G maintains identical electrical specifications (50V Vdss, 130mA Id) and is classified as an active product with full production support. The device carries ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements. The extended operating temperature range (-55°C to 150°C) provides broader application flexibility compared to the original part.

BSS84 (Secondary Substitute)

The BSS84 manufactured by Good-Ark Semiconductor provides an alternative substitute with equivalent electrical performance. This device meets all electrical requirements with 50V Vdss and 130mA continuous drain current. The BSS84 is an active product with ROHS3 compliance and REACH unaffected status. Selection of this substitute requires evaluation of supply chain preferences and manufacturing process compatibility.

Package Consideration

Both substitute parts utilize SOT-23-3 (TO-236) packaging, which differs from the original 3-SSFP package. PCB layout modifications are required to accommodate the different package footprint. The SOT-23-3 package is a standard industry configuration with widespread design tool support and manufacturing capability.

Frequently Asked Questions (FAQ)

Q: Can BSS84 or BSS84LT1G directly replace the 5HP01SS-TL-E without PCB modifications?

A: No. The 5HP01SS-TL-E uses a 3-SSFP package while both substitutes use SOT-23-3 (TO-236) packaging. PCB footprint redesign is required. Pin configuration and electrical function remain compatible.

Q: What are the key electrical differences between the 5HP01SS-TL-E and the substitute parts?

A: The substitute parts (BSS84 and BSS84LT1G) have higher continuous drain current ratings (130mA versus 70mA) while maintaining the same 50V drain-to-source voltage specification. This provides improved current handling capability and thermal margin in the application.

Q: Why is BSS84LT1G recommended over BSS84?

A: BSS84LT1G is manufactured by onsemi, the original manufacturer of the 5HP01SS-TL-E, providing design continuity and process consistency. Both devices are electrically equivalent and active products.

Q: Are there compliance or regulatory differences between the original part and substitutes?

A: All three devices (5HP01SS-TL-E, BSS84, and BSS84LT1G) share identical MSL ratings (1 - Unlimited) and REACH unaffected status. The substitute parts carry ROHS3 compliance certification, meeting current regulatory requirements.

Q: What is the operating temperature range for each device?

A: The 5HP01SS-TL-E operating temperature is not specified in available documentation. BSS84 operates to 150°C (TJ). BSS84LT1G operates across -55°C to 150°C (TJ), providing the widest temperature range.

Q: Are the electrical characteristics (Rds On, Vgs threshold) identical between parts?

A: The substitute parts specify Rds On of 10Ohm @ 100mA, 5V and Vgs(th) of 2V @ 250µA. The original 5HP01SS-TL-E electrical characteristics are not provided in available documentation. Functional equivalence is established through voltage and current ratings.

Q: What packaging options are available for the substitute parts?

A: Both BSS84 and BSS84LT1G are available in Cut Tape (CT) and Digi-Reel® packaging formats in SOT-23-3 configuration, supporting both manual and automated assembly processes.