5HD5V-F

Part Overview

The 5HD5V-F is a red LED indicator light manufactured by Bivar Inc., configured as a discrete 5V radial through-hole component. This part is classified as obsolete, necessitating the identification of functionally compatible alternatives for continued circuit design and board assembly. The part operates at 5V forward voltage with a 30mcd brightness rating and 625nm peak wavelength output.

Substiute Parts

5HD5V-F

Bivar Inc.In Stock: 7135HD5V-F Datasheet

Current PartRFQ

WP7113ID5V

KingbrightIn Stock: 25395WP7113ID5V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5HD5V-F is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Forward voltage: 5V
• Lens size: 5mm, T-1 3/4
• Mounting type: Through Hole (Radial)
• Lens transparency: Diffused
• Package configuration: Radial
• Color: Red
• Height maximum: 8.60mm

The WP7113ID5V manufactured by Kingbright satisfies all critical parameter requirements for direct substitution. Both parts share identical forward voltage, lens dimensions, mounting configuration, lens properties, and mechanical envelope specifications.

Parameter Comparison

Engineering Selection Recommendations

The WP7113ID5V is a suitable replacement for the obsolete 5HD5V-F. Both components share critical electrical parameters (5V forward voltage) and mechanical specifications (5mm T-1 3/4 through-hole radial configuration with 8.60mm maximum height).

The substitute part carries Active product status and RoHS3 compliance, compared to the Obsolete status of the original component. The WP7113ID5V remains REACH Unaffected. The ECCN and HTSUS classifications are identical between both parts.

Differential parameters include millicandela rating (30mcd vs. 25mcd), test current (8mA vs. 13mA), and viewing angle (40° vs. 30°). These variations fall within acceptable tolerance for general indicator light applications where the mechanical package and electrical interface requirements are the primary selection criteria.

Frequently Asked Questions (FAQ)

Can the WP7113ID5V directly replace the 5HD5V-F in existing designs? Yes. The forward voltage, package configuration, mechanical envelope, and mounting type are identical. Board layout and through-hole spacing designed for the 5HD5V-F will accommodate the WP7113ID5V without modification.

What are the differences in electrical performance? The WP7113ID5V operates at a higher test current (13mA versus 8mA) and produces lower brightness (25mcd versus 30mcd). Peak wavelength differs by 2nm (627nm versus 625nm), within the red spectrum range. The viewing angle is narrower at 30° compared to the original 40°.

Are there compatibility concerns with power supply or current-limiting circuits? Circuit designs using 5V forward voltage with appropriate series current-limiting resistors for 8mA operation remain compatible with the substitute part. The increased test current specification of the WP7113ID5V indicates capability for higher current operation; designs should be verified for circuit-specific requirements.

What compliance and availability advantages does the substitute part offer? The WP7113ID5V maintains Active product status with established supply availability (25,287 units in stock versus discontinued status of the original). RoHS3 compliance ensures conformance to current environmental regulations. REACH Unaffected status confirms no substances of concern for restricted use.

Should viewing angle differences affect design decisions? The narrower 30° viewing angle of the WP7113ID5V requires consideration in designs where wide-angle visibility is essential. For standard front-panel indicator applications with direct line-of-sight viewing, the reduction from 40° to 30° has minimal practical impact.