Equivalent & Substitute Parts for 5CSEMA5U23C8N

Part Overview

The 5CSEMA5U23C8N is a Dual ARM® Cortex®-A9 MPCore™ with CoreSight™ System On Chip (SOC) from Intel's Cyclone® V SE FPGA family. This embedded processor integrates 85K logic elements with a 600MHz dual-core ARM architecture in a 672-UBGA (23x23) package. The device is actively produced and widely used in embedded systems requiring integrated FPGA and processor functionality. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product family and package specifications.

Substiute Parts

5CSEMA5U23C8N

IntelIn Stock: 8595CSEMA5U23C8N Datasheet

Current PartRFQ

5CSEBA5U23C8N

IntelIn Stock: 13895CSEBA5U23C8N Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5CSEMA5U23C8N are identified based on strict equivalence across the following critical parameters:

• Manufacturer and product family (Intel Cyclone® V SE)
• Core processor architecture (Dual ARM® Cortex®-A9 MPCore™ with CoreSight™)
• Operating frequency (600MHz)
• FPGA logic element count (85K)
• Package type and pin count (672-UBGA 23x23)
• RAM capacity (64KB)
• Peripheral set (DMA, POR, WDT)
• Connectivity options (CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG)
• Operating temperature range (0°C ~ 85°C)
• Compliance certifications (RoHS, REACH, MSL rating)

Substitution is valid only when all these parameters remain identical. Variations in base product number indicate different internal configurations and are not interchangeable.

Parameter Comparison

Engineering Selection Recommendations

Both the 5CSEMA5U23C8N and 5CSEBA5U23C8N maintain identical electrical specifications, package configurations, and compliance certifications. Selection between these parts should be based on availability and supply chain requirements. Both devices are actively produced, RoHS compliant, and carry equivalent REACH status. The difference in base product numbers reflects internal design variations that do not affect functional equivalence for applications requiring the specified parameters. Inventory availability may influence procurement decisions, with 5CSEBA5U23C8N currently showing higher stock levels.

Frequently Asked Questions (FAQ)

Q: Are 5CSEMA5U23C8N and 5CSEBA5U23C8N pin-compatible?

A: Yes. Both devices use the 672-UBGA (23x23) package with identical pin assignments, I/O counts (MCU - 181, FPGA - 145), and electrical characteristics.

Q: Can I substitute 5CSEBA5U23C8N for 5CSEMA5U23C8N in existing designs?

A: Yes. The devices are functionally equivalent across all specified parameters including processor architecture, clock speed, logic element count, RAM capacity, peripheral set, and connectivity options.

Q: What determines substitution eligibility for Cyclone® V SE devices?

A: Substitution is valid when the following parameters match: manufacturer, series, core processor type, operating frequency, FPGA logic element count, package type and pin count, RAM size, peripheral configuration, connectivity options, operating temperature range, and compliance certifications.

Q: Are there differences in ECCN or HTSUS classifications between these parts?

A: The parts carry different ECCN classifications (3A001A7B for 5CSEMA5U23C8N and 3A991D for 5CSEBA5U23C8N) and identical HTSUS codes (8542.39.0001). Verify export compliance requirements for your specific application and destination.

Q: What is the moisture sensitivity level for these devices?

A: Both devices are rated MSL 3 with a 168-hour floor life. Standard moisture control procedures during storage and handling are required.

Q: Do both parts have identical thermal operating ranges?

A: Yes. Both devices operate across 0°C to 85°C junction temperature range.