Dialight 5988360100F Yellow-Green LED SMD Equivalent & Substitute Parts

Part Overview

The Dialight 5988360100F is an active-status yellow-green (573nm) surface-mount LED indicator in 1208 SMD packaging with right-angle configuration. This component is designed for discrete indication applications requiring a 2V forward voltage and 20mA test current. The part is ROHS3 compliant and currently in active production status with 1113 units in stock.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications can be maintained across alternative manufacturer offerings or product variants within the same series family.

Substiute Parts

5988360100F

DialightIn Stock: 12145988360100F Datasheet

Current PartRFQ

5972501607F

DialightIn Stock: 19105972501607F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Dialight 5988360100F is determined by the following critical parameters:

Electrical Compatibility:

• Forward voltage (Vf) must be 2V
• Test current must be 20mA
• Wavelength range must support visible indication in the yellow-green to green spectrum (572–573nm dominant wavelength)

Mechanical Compatibility:

• Mounting type must be Surface Mount, Right Angle
• Package must be 2-SMD, No Lead in 1208 supplier device package
• Lens style must be Rectangle with Domed Top with Clear transparency
• Physical dimensions must accommodate 3.00–3.20mm length and 1.50–2.00mm width
• Maximum height must not exceed 1.00mm

Compliance & Status:

• RoHS3 compliance required
• REACH Unaffected status required
• Product status must be Active

The substitute part Dialight 5972501607F meets all electrical, mechanical, and compliance criteria, with the exception of dominant wavelength (572nm green vs. 573nm yellow-green) and millicandela rating (50mcd vs. 40mcd). These variations remain within acceptable substitution parameters for indication applications where spectral shift from yellow-green to green does not compromise functional requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (5988360100F): Use when yellow-green (573nm) spectral output is required and viewing angle of 160° is necessary for wide-angle indication applications. This part is available in Strip packaging and maintains the specified 40mcd brightness rating.

Substitute Part (5972501607F): Use when green (572nm) spectral output is acceptable and the application can accommodate a narrower 130° viewing angle. The substitute provides 25% higher brightness (50mcd) and is available in Tape & Reel packaging, which may be preferred for high-volume automated assembly. Both parts maintain identical forward voltage (2V), test current (20mA), and compliance certifications (ROHS3, REACH Unaffected).

Selection between these parts depends on:

• Spectral requirement tolerance (yellow-green vs. green)
• Viewing angle requirement (160° vs. 130°)
• Brightness requirement (40mcd vs. 50mcd)
• Packaging preference (Strip vs. Tape & Reel)
• PCB layout constraints (dimensional differences: 3.20 x 1.50mm vs. 3.00 x 2.00mm)

Both parts are active-status components with identical electrical specifications and compliance profiles, making either suitable for equivalent functional replacement when application parameters align.

Frequently Asked Questions (FAQ)

Q: Can the 5972501607F substitute for the 5988360100F in all applications?

A: Substitution is valid when the application can accept green (572nm) instead of yellow-green (573nm) spectral output, a narrower 130° viewing angle instead of 160°, and higher brightness (50mcd vs. 40mcd). PCB layout must accommodate the dimensional difference (3.00 x 2.00mm vs. 3.20 x 1.50mm). Both parts share identical electrical specifications (2V Vf, 20mA test current) and compliance certifications.

Q: What is the key difference between these two parts?

A: The primary differences are dominant wavelength (573nm yellow-green vs. 572nm green), viewing angle (160° vs. 130°), millicandela rating (40mcd vs. 50mcd), and physical dimensions (3.20 x 1.50mm vs. 3.00 x 2.00mm). Electrical specifications and compliance certifications are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the 5988360100F and 5972501607F are ROHS3 Compliant with REACH Unaffected status and MSL 3 (168 Hours) moisture sensitivity rating.

Q: What packaging formats are available?

A: The 5988360100F is supplied in Strip packaging. The 5972501607F is supplied in Tape & Reel (TR) packaging. Packaging selection may depend on assembly volume and automation requirements.

Q: Can I use the substitute if my application requires a 160° viewing angle?

A: No. The substitute part has a 130° viewing angle, which is 30° narrower than the main part. If the application requires 160° viewing angle, the main part 5988360100F must be used.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and carry identical regulatory certifications. Both are active-status products in current production.