LED Circuit Board Indicator 5952902007F Equivalent & Substitute Parts

Part Overview

The Dialight 5952902007F is a Surface Mount, Right Angle LED Circuit Board Indicator featuring a single green LED with a 2mm square lens configuration. This component is designed for 3.3V applications with a 20mA operating current and delivers 300 millicandela brightness at a 522nm peak wavelength.

The 5952902007F carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

5952902007F

DialightIn Stock: 9025952902007F Datasheet

Current PartRFQ

5952902007NF

DialightIn Stock: 7595952902007NF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5952902007F is determined by the following critical parameters:

Electrical Compatibility Parameters:

• Voltage Rating: 3.3V (must match exactly)
• Current Rating: 20mA (must match exactly)
• Wavelength - Peak: 522nm (must match exactly)
• Millicandela Rating: 300mcd (must match exactly)
• Viewing Angle: 50° (must match exactly)

Mechanical Compatibility Parameters:

• Configuration: Single (must match exactly)
• Mounting Type: Surface Mount, Right Angle (must match exactly)
• Series: 595 (same product family)

Regulatory & Environmental Parameters:

• RoHS Status: ROHS3 Compliant (must maintain compliance level)
• REACH Status: REACH Unaffected (must maintain status)
• Moisture Sensitivity Level: 2 (1 Year) (must match or exceed)

The Dialight 5952902007NF qualifies as a manufacturer-recommended substitute. While the lens configuration differs (1.83mm x 1.70mm oval with domed top versus 2mm square), all critical electrical parameters, mounting specifications, and regulatory certifications remain identical. The lens style and size variation does not affect electrical performance or circuit board integration for applications where the optical form factor change is acceptable.

Parameter Comparison

Engineering Selection Recommendations

The Dialight 5952902007NF is designated as the manufacturer-recommended substitute for the obsolete 5952902007F. Selection of this substitute is supported by the following engineering criteria:

Product Status Alignment: The 5952902007NF carries Active product status, ensuring ongoing availability and supply chain continuity compared to the Obsolete status of the original part.

Electrical Parameter Equivalence: All critical electrical specifications—voltage rating (3.3V), current rating (20mA), peak wavelength (522nm), millicandela output (300mcd), and viewing angle (50°)—are identical between the original and substitute parts. These parameters determine circuit compatibility and optical performance.

Mounting and Configuration Compatibility: Both parts feature identical Surface Mount, Right Angle mounting types and Single configuration, ensuring mechanical compatibility with existing circuit board layouts and connector interfaces.

Regulatory Compliance: The original part is certified as ROHS3 Compliant and REACH Unaffected. Substitution with an active product from the same manufacturer and series maintains regulatory alignment for applications subject to these compliance requirements.

Optical Form Factor Consideration: The primary difference between the two parts is the lens configuration. The 5952902007NF features a diffused green lens in an oval with domed top (1.83mm x 1.70mm) compared to the 2mm square lens of the original. This change affects the physical appearance and light diffusion characteristics but does not alter electrical performance or circuit integration. Substitution is appropriate for applications where the optical form factor change is compatible with the end-use design.

Frequently Asked Questions (FAQ)

Q: What makes the 5952902007NF a valid substitute for the 5952902007F?

A: The 5952902007NF matches all critical electrical parameters: 3.3V voltage rating, 20mA current, 522nm wavelength, 300mcd brightness, and 50° viewing angle. Both parts share identical mounting type (Surface Mount, Right Angle), configuration (Single), and series designation (595). The substitute is manufacturer-recommended and carries Active product status, addressing the Obsolete status of the original part.

Q: Will the lens size difference affect circuit board compatibility?

A: The lens size difference (2mm square versus 1.83mm x 1.70mm oval) affects the physical footprint and optical appearance but not electrical circuit compatibility. Both parts use identical Surface Mount, Right Angle mounting. PCB layout compatibility depends on whether the design accommodates the smaller oval lens form factor. Physical clearance and visual indicator placement should be verified against the specific application requirements.

Q: Are there any compliance or certification differences between the two parts?

A: The original 5952902007F is specified as ROHS3 Compliant and REACH Unaffected. The 5952902007NF data does not explicitly specify these certifications in the provided parameters. Confirmation of equivalent compliance status should be obtained from Dialight technical documentation or the component supplier for applications subject to regulatory requirements.

Q: Can the 5952902007NF be used as a direct drop-in replacement?

A: The 5952902007NF is electrically and mechanically compatible for circuit operation. However, "direct drop-in" status depends on the specific application design. The lens configuration change requires verification that the optical form factor (smaller oval with domed top versus square) is acceptable for the intended visual indicator function and PCB layout constraints.

Q: What is the Moisture Sensitivity Level for the substitute part?

A: The original part specifies Moisture Sensitivity Level 2 (1 Year). The substitute part data does not include this specification in the provided parameters. MSL information should be confirmed with the component supplier or Dialight technical documentation for applications requiring controlled storage and handling conditions.