Pomona Electronics 5935-9 Banana Jack Connector Equivalent & Substitute Parts

Part Overview

The Pomona Electronics 5935-9 is a miniature banana jack connector with solder eyelet termination, designed for panel mount applications. This connector features white insulation at the mating end and accommodates wire gauges from 18-22 AWG. The part is currently in stock with 815 units available as new original inventory. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when specific application requirements necessitate alternative configurations.

Substiute Parts

5935-9

Pomona ElectronicsIn Stock: 9155935-9 Datasheet

Current PartRFQ

5935-0

Pomona ElectronicsIn Stock: 17415935-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Pomona Electronics 5935-9 are identified based on strict equivalence of the following critical parameters:

• Connector Type: Banana Jack (Female)
• Mating Plug Diameter: Miniature
• Mounting Configuration: Panel Mount
• Termination Method: Solder Eyelet(s)
• Insulation: Mating End Insulated
• Wire Gauge Compatibility: 18-22 AWG
• Contact Material and Finish: Brass with Nickel finish
• Body Material: Polyamide (PA), Nylon
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected

The primary difference between the main part (5935-9) and its substitute (5935-0) is the insulation color at the mating end: white versus black. Both parts share identical electrical and mechanical specifications, making them functionally interchangeable in applications where color differentiation is not a circuit-critical requirement.

Parameter Comparison

Engineering Selection Recommendations

Both the 5935-9 and 5935-0 are active products manufactured by Pomona Electronics and maintain full compliance with ROHS3 and REACH regulatory requirements. Selection between these parts should be based on the following criteria:

5935-9 (White Insulation): Select this part number when circuit design or assembly documentation specifies white insulation for color-coded circuit identification or when existing inventory aligns with established assembly procedures.

5935-0 (Black Insulation): Select this part number when black insulation is required for circuit identification purposes or when higher inventory availability (1668 units) supports production scheduling requirements.

Both parts are electrically and mechanically equivalent. The choice between them is determined solely by insulation color requirements and inventory availability. No functional performance differences exist between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Are the 5935-9 and 5935-0 electrically interchangeable?

A: Yes. Both parts are identical in electrical performance, contact material (brass with nickel finish), termination method (solder eyelet), and wire gauge compatibility (18-22 AWG). The only difference is insulation color.

Q: What determines whether I can substitute the 5935-9 with the 5935-0?

A: Substitution is permissible when insulation color is not a functional or identification requirement in your circuit design. If color-coded circuit identification is necessary, the specific color must be maintained.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the 5935-9 and 5935-0 are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory requirements for use in equivalent applications.

Q: What wire gauges are compatible with these connectors?

A: Both connectors accommodate wire gauges from 18-22 AWG, providing compatibility with standard signal and low-power circuit wiring.

Q: Are these parts suitable for panel mount applications?

A: Yes. Both the 5935-9 and 5935-0 are designed for panel mount installation with solder eyelet termination to the PCB or chassis.

Q: What is the base product number for these parts?

A: The base product number is 5935. The suffixes -9 and -0 designate specific color variants (white and black insulation, respectively).