Bourns 5800-682 Equivalent & Substitute Parts

Part Overview

The Bourns 5800-682 is a 6.8 mH unshielded drum core wirewound inductor rated for 91 mA with a maximum DC resistance of 17.5 Ohm, designed for through-hole axial mounting. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. Substitute parts must maintain the core inductance value, current rating compatibility, and through-hole axial mounting configuration while meeting modern compliance requirements where applicable.

Substiute Parts

5800-682

Bourns Inc.In Stock: 10095800-682 Datasheet

Current PartRFQ

5800-682-RC

Bourns Inc.In Stock: 10965800-682-RC Datasheet

DirectRFQ

2474-47L

API Delevan Inc.In Stock: 10302474-47L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Bourns 5800-682 are evaluated based on the following critical parameters:

• Inductance Value: Must be 6.8 mH to maintain circuit functionality
• Current Rating: Must support minimum 91 mA operation
• DC Resistance: Must not exceed 17.5 Ohm maximum to ensure acceptable power dissipation
• Core Material: Ferrite core required for specified inductance characteristics
• Mounting Configuration: Through-hole axial mounting mandatory for mechanical compatibility
• Operating Temperature: Must support -55°C to 105°C minimum range
• Shielding: Unshielded configuration required

Parts are classified as direct equivalents when all parameters match within specified tolerances, or as similar alternatives when inductance and core material match but secondary parameters vary within acceptable engineering margins.

Parameter Comparison

Engineering Selection Recommendations

Bourns 5800-682-RC is the primary direct equivalent substitute. This part maintains identical electrical specifications (6.8 mH inductance, 91 mA current rating, 17.5 Ohm DC resistance) and physical dimensions while offering active product status and ROHS3 compliance. The packaging difference (tray versus original specification) does not affect electrical or mechanical compatibility. This substitute is suitable for all applications where the original 5800-682 was specified.

API Delevan 2474-47L is a similar alternative for applications where higher current capacity and lower DC resistance are beneficial. This part provides 150 mA current rating and 15 Ohm maximum DC resistance, representing improved performance margins. However, the saturation current (80 mA) is lower than the original specification (140 mA), and inductance tolerance is wider (±15% versus ±10%). Physical dimensions differ slightly. This substitute is appropriate only when circuit design permits the wider tolerance and lower saturation current specification.

Frequently Asked Questions (FAQ)

Q: Can the 5800-682-RC be used as a direct replacement for the 5800-682?

A: Yes. The 5800-682-RC is a direct equivalent with identical electrical and mechanical specifications. The only difference is packaging format (tray) and improved RoHS3 compliance status. No circuit modifications are required.

Q: What are the limitations of using the API Delevan 2474-47L as a substitute?

A: The 2474-47L has a lower saturation current (80 mA versus 140 mA) and wider inductance tolerance (±15% versus ±10%). Applications requiring tight inductance tolerance or operating near saturation limits should not use this substitute. Physical dimensions also differ slightly, which may affect board layout.

Q: Are there compliance differences between the substitute parts?

A: Yes. The 5800-682-RC is ROHS3 compliant, while both the original 5800-682 and the 2474-47L are RoHS non-compliant. For applications requiring RoHS compliance, the 5800-682-RC is the appropriate choice.

Q: Does the inductor type difference (drum core wirewound versus molded) affect substitution?

A: The construction difference affects performance characteristics. The 2474-47L molded design provides different mechanical properties and may have different frequency response characteristics compared to the drum core wirewound design. Verify compatibility with specific circuit requirements before substitution.

Q: What is the temperature operating range for each part?

A: The 5800-682 and 5800-682-RC both operate from -55°C to 105°C. The 2474-47L extends to -55°C to 125°C, providing a wider temperature range suitable for high-temperature applications.