Bourns 5800-100 10µH Wirewound Inductor Equivalent & Substitute Parts

Part Overview

The Bourns 5800-100 is a 10µH unshielded drum core wirewound inductor rated for 2.1A continuous current with a maximum DC resistance of 32mOhm. This through-hole axial component operates across the industrial temperature range of -55°C to 105°C and is designed for general-purpose filtering and energy storage applications in electronic circuits.

The 5800-100 carries an obsolete product status, making equivalent and substitute parts necessary for ongoing design support and production continuity. Direct replacements and functionally compatible alternatives are available from both the original manufacturer and qualified alternative suppliers.

Substiute Parts

5800-100

Bourns Inc.In Stock: 9595800-100 Datasheet

Current PartRFQ

5800-100-RC

Bourns Inc.In Stock: 14955800-100-RC Datasheet

DirectRFQ

2474-13L

API Delevan Inc.In Stock: 7442474-13L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5800-100 are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalent (Same Manufacturer): The 5800-100-RC is an identical electrical specification part from Bourns Inc., differing only in packaging format (tray versus bulk) and product status (active versus obsolete). This part maintains all critical electrical parameters: 10µH inductance at ±10% tolerance, 2.1A current rating, 32mOhm maximum DCR, 3.6A saturation current, and identical physical dimensions. The 5800-100-RC is RoHS3 compliant, whereas the original 5800-100 is non-compliant.

Similar Substitute (Alternative Manufacturer): The API Delevan 2474-13L provides functional substitution with allowable parameter variations. This part maintains the core electrical function (10µH inductance, ferrite core, unshielded, axial through-hole mounting) but differs in the following parameters: current rating (3.27A versus 2.1A), inductance tolerance (±15% versus ±10%), DC resistance (33mOhm versus 32mOhm), saturation current (2A versus 3.6A), operating temperature range (-55°C to 125°C versus -55°C to 105°C), and physical dimensions (0.240" Dia × 0.740" L versus 0.275" Dia × 0.700" L). The 2474-13L is non-compliant with RoHS.

Substitution eligibility is determined by matching inductance value, core material, shielding configuration, mounting type, and package style, with allowable tolerances in current ratings and DC resistance based on circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: The 5800-100-RC is the preferred substitute when product continuity and electrical specification matching are required. As an active product from the original manufacturer with identical electrical parameters and physical dimensions, it provides seamless integration into existing designs. The upgrade to RoHS3 compliance offers environmental and regulatory advantages for new production runs.

For Alternative Sourcing: The API Delevan 2474-13L is suitable when the higher current rating (3.27A versus 2.1A) and extended operating temperature range (-55°C to 125°C) provide design margin benefits. The slightly higher inductance tolerance (±15% versus ±10%) and marginally higher DC resistance (33mOhm versus 32mOhm) are acceptable in applications where the 5800-100 operates below its maximum current specification. Physical dimension differences require PCB layout verification for footprint compatibility.

Selection between these substitutes depends on compliance requirements, thermal operating conditions, and available inventory. The 5800-100-RC maintains specification parity with the obsolete original part, while the 2474-13L offers enhanced current handling capability at the cost of tighter tolerance control.

Frequently Asked Questions (FAQ)

Q: Can the 5800-100-RC be used as a direct drop-in replacement for the 5800-100?

A: Yes. The 5800-100-RC is electrically and mechanically identical to the 5800-100, with matching inductance (10µH ±10%), current rating (2.1A), DC resistance (32mOhm max), and physical dimensions (0.275" Dia × 0.700" L). The only differences are packaging format and product status. Both are suitable for through-hole axial mounting on PCBs designed for the original part.

Q: Is the API Delevan 2474-13L compatible with circuits designed for the 5800-100?

A: The 2474-13L is functionally compatible when circuit current requirements do not exceed 2.1A. The part maintains the same 10µH inductance value, ferrite core material, unshielded configuration, and through-hole axial mounting. However, verify PCB footprint compatibility due to dimensional differences (0.240" Dia × 0.740" L versus 0.275" Dia × 0.700" L). The higher saturation current specification (2A versus 3.6A) requires evaluation if the circuit operates near saturation conditions.

Q: What are the key differences between the 5800-100-RC and 2474-13L?

A: The 5800-100-RC maintains identical electrical specifications to the original 5800-100 and is RoHS3 compliant. The 2474-13L offers higher current rating (3.27A), wider operating temperature range (-55°C to 125°C), and looser inductance tolerance (±15%). The 2474-13L uses molded construction versus drum core wirewound, and has slightly different physical dimensions. Both are unshielded ferrite core inductors suitable for general-purpose applications.

Q: Does packaging format affect electrical performance?

A: No. The 5800-100 and 5800-100-RC differ only in packaging (bulk versus tray). Electrical performance, inductance value, current rating, and DC resistance are identical. Packaging selection is based on inventory management, handling, and supply chain requirements, not circuit performance.

Q: Are there temperature range considerations when substituting the 2474-13L?

A: The 2474-13L operates to 125°C versus 105°C for the 5800-100. This extended range is beneficial for high-temperature applications but does not restrict use in circuits operating within the original -55°C to 105°C specification. Verify that component derating curves and thermal management remain adequate for the specific application.