TE Connectivity AMP Connectors 5767117-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5767117-1 is a 38-position rectangular connector plug with outer shroud contacts designed for surface mount applications. This MICTOR series connector features gold-plated contacts and is classified as an active product. The connector is RoHS non-compliant and carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector specifications, allowing for direct functional replacement in circuit board assemblies while accommodating supply chain variations or compliance requirements.

Substiute Parts

5767117-1

TE Connectivity AMP ConnectorsIn Stock: 6425767117-1 Datasheet

Current PartRFQ

5767007-8

TE Connectivity AMP ConnectorsIn Stock: 18595767007-8 Datasheet

Parametric EquivalentRFQ

767007-8

TE Connectivity AMP ConnectorsIn Stock: 690767007-8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5767117-1 connector is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• 38-position contact count
• 0.025" (0.64mm) pitch spacing
• 2-row configuration
• Gold contact finish at 30.0µin (0.76µm) thickness

Mechanical Parameters:

• Plug connector type with outer shroud contacts
• Surface mount mounting configuration
• Board guide and ground bus plane features
• Height above board of 0.251" (6.38mm)
• Mated stacking heights of 6.6mm and 15.62mm

Environmental Parameters:

• MSL rating of 1 (Unlimited)
• MICTOR series classification

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in product status (Active, Obsolete) or regulatory compliance (RoHS status, REACH classification) do not affect electrical or mechanical substitutability but influence selection based on supply chain and compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 5767007-8

The 5767007-8 is the preferred substitute for the 5767117-1. Both parts maintain identical electrical and mechanical specifications across all critical parameters. The 5767007-8 offers the additional advantage of RoHS compliance, making it suitable for applications subject to RoHS regulatory requirements. Both parts carry Active product status, ensuring continued manufacturer support and availability. The 5767007-8 demonstrates higher inventory availability (1759 units) compared to the main part (631 units).

Secondary Selection: 767007-8

The 767007-8 is a parametric equivalent that maintains all electrical and mechanical specifications. However, this part carries an Obsolete product status, indicating discontinued manufacturer support and potential supply chain limitations. The 767007-8 is RoHS non-compliant and carries REACH Affected classification. Selection of this part is appropriate only when existing inventory must be utilized or when RoHS compliance is not a design requirement. Inventory availability is moderate at 678 units.

Compliance Considerations:

Applications requiring RoHS compliance should prioritize the 5767007-8 substitute. Applications with no RoHS requirement may use either the main part (5767117-1) or the 767007-8 substitute based on supply chain availability. The REACH Affected status of 767007-8 requires evaluation against specific application regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the 5767007-8 be used as a direct replacement for the 5767117-1?

A: Yes. The 5767007-8 is a parametric equivalent with identical electrical and mechanical specifications. All contact positions, pitch spacing, mounting configuration, and physical dimensions are equivalent. The parts are directly interchangeable in circuit board assemblies.

Q: What is the primary difference between the 5767117-1 and 5767007-8?

A: The 5767007-8 is RoHS Compliant, while the 5767117-1 is RoHS non-compliant. All other electrical, mechanical, and environmental parameters are identical. Selection between these parts depends on regulatory compliance requirements for the end application.

Q: Why is the 767007-8 listed as a substitute if it is Obsolete?

A: The 767007-8 maintains all required electrical and mechanical parameters for functional substitution. Its Obsolete status indicates discontinued manufacturer support rather than technical incompatibility. This part is listed for reference in applications where existing inventory is available or where RoHS compliance is not required.

Q: Are there packaging differences between these substitute parts?

A: The 5767117-1 and 5767007-8 are both packaged in Tube format. The 767007-8 packaging information is not specified in available documentation. Packaging differences do not affect connector functionality but may influence handling and storage procedures.

Q: What does MSL 1 (Unlimited) mean for these connectors?

A: MSL 1 (Unlimited) indicates that these connectors have no moisture sensitivity restrictions. They do not require special moisture-controlled storage conditions and can be stored and handled under standard environmental conditions without degradation.

Q: Can these connectors be used interchangeably in existing PCB designs?

A: Yes, provided the PCB footprint and mating connector are designed for the MICTOR series 38-position plug configuration. The identical height above board (0.251" / 6.38mm) and mated stacking heights (6.6mm, 15.62mm) ensure mechanical compatibility with existing board layouts and mating receptacles.

Q: What export control classification applies to these connectors?

A: All three parts carry ECCN classification EAR99, indicating they are subject to standard export control regulations. The HTSUS code 8536.69.4040 applies to all parts for tariff and trade classification purposes.