TE Connectivity 5767096-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5767096-3 is a 114 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This rectangular connector from the MICTOR series features gold-plated contacts and is rated for multiple mated stacking heights. The part is currently classified as Obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and procurement needs.

Key Parameters

Parameter	Value
Manufacturer Part Number	5767096-3
Manufacturer	TE Connectivity AMP Connectors
Category	Rectangular Connectors
Series	MICTOR
Connector Type	Receptacle, Center Strip Contacts
Number of Positions	114
Pitch	0.025" (0.64mm)
Number of Rows	2
Mounting Type	Surface Mount
Contact Finish	Gold
Contact Finish Thickness	30.0µin (0.76µm)
Height Above Board	0.236" (6.00mm)
Features	Board Guide, Ground Bus (Plane)
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the 5767096-3 is determined by the following critical parameters:

Electrical Parameters:

Number of Positions: 114
Pitch: 0.025" (0.64mm)
Number of Rows: 2
Connector Type: Receptacle, Center Strip Contacts
Contact Finish: Gold
Contact Finish Thickness: 30.0µin (0.76µm)

Mechanical Parameters:

Mounting Type: Surface Mount
Height Above Board: 0.236" (6.00mm)
Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm
Features: Board Guide, Ground Bus (Plane)

Environmental & Compliance Parameters:

Moisture Sensitivity Level (MSL): 1 (Unlimited)
ECCN: EAR99
HTSUS: 8536.69.4040

All substitute parts listed maintain identical electrical and mechanical specifications. Variations in product status, RoHS compliance, and REACH status are noted for regulatory and procurement considerations.

Parameter Comparison

Manufacturer Part Number	Product Status	Packaging	RoHS Status	REACH Status	Inventory (Pcs)	Base Product Number
5767096-3	Obsolete	Not Specified	ROHS3 Compliant	Vendor Undefined	1028	5767096
1-5767096-0	Active	Tape & Reel (TR)	ROHS3 Compliant	REACH Unaffected	752	5767096
1-5767115-0	Active	Tape & Reel (TR)	ROHS3 Compliant	Vendor Undefined	1152	5767115
1-767096-0	Active	Tape & Reel (TR)	RoHS non-compliant	REACH Affected	1009	767096
1-767114-0	Active	Tape & Reel (TR)	RoHS non-compliant	Vendor Undefined	624	767114
1-767115-0	Active	Tape & Reel (TR)	RoHS non-compliant	Vendor Undefined	1150	767115
5767115-3	Active	Tape & Reel (TR)	RoHS Compliant	Vendor Undefined	1083	5767115
767096-3	Active	Tape & Reel (TR)	RoHS non-compliant	REACH Affected	1102	767096
767115-3	Active	Tape & Reel (TR)	RoHS non-compliant	Vendor Undefined	710	767115
767171-3	Active	Tape & Reel (TR)	RoHS Compliant	Vendor Undefined	846	767171

Engineering Selection Recommendations

Primary Recommendation for RoHS3 Compliant Applications:

The 1-5767096-0 is the preferred substitute for the obsolete 5767096-3. Both parts share identical electrical and mechanical specifications with matching ROHS3 compliance status. The 1-5767096-0 is currently Active and available in Tape & Reel packaging with REACH Unaffected status, providing the most direct replacement path for new designs and ongoing production.

Alternative RoHS3 Compliant Option:

The 1-5767115-0 and 5767115-3 are functionally equivalent alternatives with ROHS3 compliance. These parts maintain all critical electrical and mechanical parameters and are suitable for applications where the base product number 5767115 is acceptable.

RoHS Compliant Alternative:

The 767171-3 provides RoHS Compliant status with identical connector specifications. This part is suitable for applications requiring RoHS compliance where the specific base product number variant is not a constraint.

Legacy Applications:

For applications where RoHS compliance is not required, the 767096-3, 1-767096-0, 1-767114-0, 1-767115-0, and 767115-3 are electrically and mechanically equivalent. These parts carry RoHS non-compliant status and should be evaluated against regulatory requirements for the target application.

Frequently Asked Questions (FAQ)

Q: Can the 1-5767096-0 directly replace the obsolete 5767096-3?

A: Yes. The 1-5767096-0 maintains identical electrical specifications (114 positions, 0.025" pitch, 2 rows, gold contacts), mechanical specifications (Surface Mount, 0.236" height above board, board guide and ground bus features), and environmental ratings (MSL 1, ROHS3 Compliant). The primary difference is packaging format (Tape & Reel) and product status (Active).

Q: What is the difference between parts with base numbers 5767096, 5767115, 767096, 767114, 767115, and 767171?

A: All listed parts share identical connector specifications for position count, pitch, row configuration, mounting type, contact finish, and stacking heights. The base product number variations reflect different product line designations within the MICTOR series. Selection between these variants depends on design requirements and procurement constraints rather than electrical or mechanical differences.

Q: Are there RoHS compliance differences among the substitute parts?

A: Yes. The 1-5767096-0, 1-5767115-0, 5767115-3, and 767171-3 carry RoHS compliance certifications (ROHS3 Compliant or RoHS Compliant). The 1-767096-0, 1-767114-0, 1-767115-0, 767096-3, and 767115-3 are RoHS non-compliant. Selection must align with target application regulatory requirements.

Q: What packaging formats are available?

A: The original 5767096-3 packaging is not specified. All substitute parts are available in Tape & Reel (TR) packaging, which is standard for surface mount production environments.

Q: Does REACH status affect component selection?

A: REACH status varies across the substitute parts. The 1-5767096-0 is REACH Unaffected. The 1-767096-0 and 767096-3 are REACH Affected. Remaining parts show Vendor Undefined status. Applications subject to REACH regulations should prioritize the 1-5767096-0 or confirm vendor compliance for parts with undefined status.

Q: Are all substitute parts rated for the same mated stacking heights?

A: Yes. All substitute parts support identical mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm.

Q: What is the Moisture Sensitivity Level (MSL) for these connectors?

A: All parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message