TE Connectivity AMP Connectors 5767081-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5767081-5 is a 190 Position Connector Receptacle designed for surface mount applications with center strip contacts and palladium-nickel plating. This rectangular connector operates within the MICTOR series and is classified as Active product status. Substitute parts are identified when original inventory becomes unavailable, when procurement lead times require alternative sourcing, or when equivalent electrical and mechanical specifications must be maintained across production batches while preserving circuit board compatibility and performance characteristics.

Substiute Parts

5767081-5

TE Connectivity AMP ConnectorsIn Stock: 12085767081-5 Datasheet

Current PartRFQ

5767054-5

TE Connectivity AMP ConnectorsIn Stock: 10435767054-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5767081-5 are identified based on strict electrical and mechanical parameter equivalence within the MICTOR rectangular connector family. The substitution criteria are limited to the following parameters:

• Connector Type: Receptacle with center strip contacts
• Number of Positions: 190 positions
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2 rows
• Mounting Type: Surface Mount
• Contact Finish: Palladium-Nickel at 5.00µin thickness
• Height Above Board: 0.236" (6.00mm)
• Mated Stacking Heights: Identical range of 6.6mm through 22.86mm
• Features: Board Guide and Ground Bus (Plane)
• Packaging: Tube

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in base product number, inventory levels, or RoHS certification revision do not affect substitution eligibility when all electrical and mechanical specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

The 5767054-5 is a direct parametric equivalent to the 5767081-5 for all electrical and mechanical applications. Both parts are Active status products manufactured by TE Connectivity AMP Connectors within the MICTOR series. The substitute part maintains identical specifications across all critical parameters including connector type, position count, pitch, mounting configuration, contact finish, and physical dimensions.

The RoHS certification difference (RoHS Compliant versus ROHS3 Compliant) reflects regulatory compliance evolution and does not impact functional equivalence. Both parts satisfy current environmental and hazardous substance restrictions.

Selection between these parts is determined by availability, procurement lead time, and inventory status rather than technical performance differences. The 5767054-5 contains 1032 pieces in current stock inventory, while the 5767081-5 contains 1129 pieces. Both parts are supplied in tube packaging and are suitable for immediate integration into surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the 5767054-5 be used as a direct replacement for the 5767081-5 in existing circuit board designs?

A: Yes. The 5767054-5 is a parametric equivalent with identical electrical and mechanical specifications. All pin positions, pitch spacing, mounting footprint, and contact characteristics are identical. No circuit board redesign or layout modification is required.

Q: Are there differences in contact reliability or signal integrity between these two parts?

A: No. Both parts feature identical palladium-nickel contact finish at 5.00µin thickness, identical pitch of 0.025" (0.64mm), and identical center strip contact configuration. Signal integrity and contact reliability characteristics are equivalent.

Q: What is the significance of the different RoHS certifications?

A: Both parts comply with current RoHS regulations. The RoHS3 designation on the 5767054-5 reflects compliance with the most recent regulatory revision. This does not affect functional performance or material composition relevant to circuit operation.

Q: Can these parts be mixed within the same production batch or assembly?

A: Yes. The identical specifications across all electrical and mechanical parameters allow these parts to be used interchangeably within the same assembly or production batch without impact on performance or reliability.

Q: Are the mated stacking heights identical between these parts?

A: Yes. Both parts support the identical range of mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm. Connector stack configurations are fully compatible.

Q: What is the moisture sensitivity level for both parts?

A: Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply without special environmental controls.

Q: Are both parts available in tube packaging only?

A: Yes. Both the 5767081-5 and 5767054-5 are supplied exclusively in tube packaging. No alternative packaging formats are specified for these part numbers.