TE Connectivity AMP Connectors 5767054-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5767054-3 is a 114 Position Connector Receptacle designed for surface mount applications with center strip contacts and palladium-nickel finish. This rectangular connector operates at a 0.025" (0.64mm) pitch across 2 rows and is part of the MICTOR series. The component is currently in Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Identification of equivalent and substitute parts becomes necessary when addressing inventory constraints, supply chain discontinuities, or when transitioning between active and obsolete product lines within compatible specifications.

Substiute Parts

5767054-3

TE Connectivity AMP ConnectorsIn Stock: 8085767054-3 Datasheet

Current PartRFQ

767054-3

TE Connectivity AMP ConnectorsIn Stock: 860767054-3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5767054-3 is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 114
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Palladium-Nickel
• Contact Finish Thickness: 5.00µin (0.127µm)
• Height Above Board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Series: MICTOR
• Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm

The substitute part 767054-3 meets all electrical and mechanical parameters required for functional equivalence. However, differences in product status, RoHS compliance, and REACH classification must be evaluated for regulatory and supply chain requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 5767054-3

The 5767054-3 is the recommended primary selection for new designs and ongoing production. This part carries Active product status, ensuring continued manufacturer support and availability. Full RoHS3 compliance and REACH Unaffected status satisfy current regulatory requirements for electronics manufacturing in restricted substance environments. The part is currently in stock with 772 pieces available.

Secondary Selection: 767054-3

The 767054-3 functions as an electrical and mechanical equivalent with identical connector specifications, pitch, position count, and contact characteristics. However, this part is classified as Obsolete with RoHS non-compliant status and REACH Affected classification. Selection of 767054-3 is limited to legacy system maintenance, repair operations, or applications where regulatory compliance requirements do not apply. The part is available with 777 pieces in stock.

Regulatory Compliance Considerations

Applications subject to RoHS3 directives or REACH regulations must use 5767054-3. Applications operating under legacy or non-regulated environments may utilize 767054-3 for cost optimization or inventory management, provided supply chain continuity is established.

Frequently Asked Questions (FAQ)

Q: Are 5767054-3 and 767054-3 electrically interchangeable?

A: Yes. Both parts are 114 position receptacles with identical pitch (0.025"), contact finish (palladium-nickel), mounting type (surface mount), and electrical characteristics. They are functionally equivalent for signal transmission and ground plane connectivity.

Q: What is the primary difference between these parts?

A: The main differences are product status and regulatory compliance. The 5767054-3 is Active and RoHS3 compliant, while the 767054-3 is Obsolete and RoHS non-compliant. Both parts share identical mechanical and electrical specifications.

Q: Can 767054-3 be used in new product designs?

A: The 767054-3 is classified as Obsolete. New product designs should specify 5767054-3 to ensure long-term availability and regulatory compliance. The 767054-3 is suitable only for legacy system support or repair applications where RoHS compliance is not required.

Q: Are there any packaging differences between these parts?

A: The 5767054-3 is packaged in Tube format. Packaging information for 767054-3 is not specified in available documentation.

Q: What is the moisture sensitivity level for both parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are both parts suitable for surface mount assembly?

A: Yes. Both parts are designed for surface mount applications with identical height above board specifications (0.236" / 6.00mm) and compatible mated stacking heights.

Q: What regulatory certifications apply to the 5767054-3?

A: The 5767054-3 is RoHS3 compliant and REACH Unaffected. Both parts carry EAR99 export classification and HTSUS code 8536.69.4040.