TE Connectivity 5747832-3 D-Sub Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5747832-3 is a 9-position D-Sub plug connector with right-angle solder termination, designed for signal applications in the AMPLIMITE HD-20 series. This connector features male pins, through-hole mounting, and a tin-plated steel shell with gold-flashed contacts. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. The connector operates across a temperature range of -55°C to 105°C with a 6A current rating and 125V voltage rating.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold, Flash
Current Rating	6A
Voltage Rating	125V
Operating Temperature	-55°C ~ 105°C
Backset Spacing	0.590" (14.99mm)
Material Flammability Rating	UL94 V-0

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 5747832-3 is determined by strict adherence to the following critical parameters:

Primary Compatibility Criteria:

Connector style: D-Sub
Connector type: Plug, Male Pins
Number of positions: 9
Number of rows: 2
Shell size and layout: 1 (DE, E)
Mounting type: Through Hole, Right Angle
Termination method: Solder
Material flammability rating: UL94 V-0
Contact finish: Gold, Flash
Operating temperature range: -55°C ~ 105°C

Secondary Compatibility Considerations:

Backset spacing tolerance: 0.590" (14.99mm) ± acceptable variance
Current rating: Substitute must support minimum 6A
Voltage rating: Substitute must support minimum 125V
Shell material finish: Steel with plating (tin or nickel acceptable)
Contact material: Brass or copper alloy

Substitute parts are grouped based on flange feature configuration (housing/shell threaded vs. unthreaded, mating side screwlock options) and shell material finish variations. All substitute parts maintain the core 9-position D-Sub plug configuration with right-angle solder termination and male pin contact type.

Parameter Comparison

Parameter	5747832-3 (TE)	183-009-113R161 (NorComp)	183-009-113R171 (NorComp)	183-009-113R181 (NorComp)	183-009-113R531 (NorComp)	183-009-113R541 (NorComp)	183-009-113R561 (NorComp)	183-009-113R571 (NorComp)	625-009-262-031 (Mercury)	625-009-262-032 (Mercury)	625-009-262-033 (Mercury)
Connector Style	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Board Edge, Through Hole, Right Angle	Board Edge, Through Hole, Right Angle	Board Edge, Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated
Contact Finish	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash	Gold, Flash
Current Rating	6A	5A	5A	5A	5A	5A	5A	5A	3A per Contact	3A per Contact	3A per Contact
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.584" (14.84mm)	0.584" (14.84mm)	0.584" (14.84mm)
Operating Temperature	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 85°C	-55°C ~ 85°C	-55°C ~ 85°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Brass	Brass	Brass	Brass	Brass	Brass	Brass	Brass	Copper Alloy	Copper Alloy	Copper Alloy
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	Not applicable	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

NorComp 183 Series Substitutes (183-009-113R161, 183-009-113R171, 183-009-113R181, 183-009-113R531, 183-009-113R541, 183-009-113R561, 183-009-113R571)

The NorComp 183 series connectors are active products with ROHS3 compliance and REACH unaffected status. These parts maintain full compatibility with the 5747832-3 across all critical mechanical and electrical parameters including connector style, pin configuration, shell size, mounting type, and termination method. All NorComp 183 series variants operate across the same -55°C to 105°C temperature range and feature UL94 V-0 flammability rating. The primary difference is current rating: NorComp parts are rated at 5A compared to the original 6A specification. Voltage rating information is not provided for NorComp parts. NorComp variants differ in flange feature configuration (housing/shell threaded vs. unthreaded, mating side screwlock options) and feature sets (board lock, grounding indents). Selection among NorComp variants depends on specific flange and mounting requirements for the application.

Mercury United Electronics 625 Series Substitutes (625-009-262-031, 625-009-262-032, 625-009-262-033)

The Mercury 625 series connectors are active products with ROHS3 compliance and REACH unaffected status. These parts maintain the 9-position D-Sub plug configuration with right-angle solder termination and male pins. Mercury parts feature board edge mounting capability in addition to through-hole mounting and include shielding and mounting brackets. Operating temperature range is -55°C to 85°C, which is narrower than the original specification. Current rating is 3A per contact, which is lower than both the original 6A and NorComp 5A ratings. Backset spacing is 0.584" (14.84mm), a minor deviation from the original 0.590" (14.99mm). Mercury variants differ in flange feature configuration (unthreaded housing vs. 4-40 threaded vs. mating side screwlock). Mercury parts are suitable for applications where the reduced current and temperature ratings are acceptable and where board edge mounting or shielding features provide functional advantage.

Product Status Consideration

The original TE Connectivity 5747832-3 is classified as obsolete. All substitute parts listed are active products with current manufacturing support. Selection of an active substitute part ensures ongoing availability and supply chain continuity for new production and field replacements.

Frequently Asked Questions (FAQ)

Q: Can NorComp 183 series parts directly replace the TE Connectivity 5747832-3?

A: NorComp 183 series parts are mechanically and electrically compatible with the 5747832-3 across all critical parameters including connector style, pin count, shell size, mounting type, and termination method. Both operate across -55°C to 105°C and feature UL94 V-0 flammability rating. The primary difference is current rating: NorComp parts are rated at 5A versus the original 6A. If the application requires the full 6A current capacity, NorComp parts may not be suitable. Voltage rating information is not provided for NorComp parts, so applications requiring the original 125V specification should be evaluated accordingly.

Q: What is the difference between the various NorComp 183 variants?

A: All NorComp 183 variants (183-009-113R161, 183-009-113R171, 183-009-113R181, 183-009-113R531, 183-009-113R541, 183-009-113R561, 183-009-113R571) share the same core 9-position D-Sub plug configuration, solder termination, and operating specifications. Differences exist in flange feature configuration: some feature unthreaded housing shells, others feature 4-40 threaded housing shells, and some feature mating side female screwlock options. Additionally, feature sets vary: some include board lock and grounding indents, while others include only grounding indents. Selection depends on the specific mounting and mating requirements of the application.

Q: Are Mercury 625 series parts suitable replacements?

A: Mercury 625 series parts maintain the 9-position D-Sub plug configuration with right-angle solder termination and are active products with ROHS3 compliance. However, they have reduced current rating (3A per contact versus 6A original), narrower operating temperature range (-55°C to 85°C versus -55°C to 105°C original), and slightly different backset spacing (0.584" versus 0.590" original). Mercury parts are suitable only for applications where these reduced specifications are acceptable. Mercury parts offer additional features including board edge mounting capability, shielding, and mounting brackets, which may provide functional advantage in specific applications.

Q: What packaging options are available?

A: NorComp 183 series parts are supplied in tray packaging. Mercury 625 series parts are supplied in either bulk or tray packaging depending on the specific variant. The original TE Connectivity 5747832-3 packaging information is not specified. Packaging selection should be based on production volume and handling requirements.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed are ROHS3 compliant. The original TE Connectivity 5747832-3 has RoHS status listed as not applicable. If RoHS compliance is required for the application, substitute parts provide this compliance.

Q: What is the inventory status of substitute parts?

A: All substitute parts are listed as active products with current inventory availability. NorComp 183 series inventory ranges from 1,220 to 3,764 pieces. Mercury 625 series inventory ranges from 859 to 976 pieces. The original TE Connectivity 5747832-3 has 833 pieces listed as new original in stock but is classified as obsolete.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message