TE Connectivity AMP Connectors 5747827-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5747827-4 is a 9-position D-Sub plug connector with right-angle solder termination, designed for through-hole mounting applications. This connector belongs to the AMPLIMITE HD-20 series and features male pins with a DE/E shell size configuration. The part maintains active product status with 1151 pieces in current inventory stock.

Substitute parts are identified when equivalent D-Sub connectors share the same functional electrical and mechanical characteristics, including connector style, position count, shell size, termination method, and operating parameters. Alternative sources provide equivalent performance for applications requiring component interchangeability or supply chain flexibility.

Substiute Parts

5747827-4

TE Connectivity AMP ConnectorsIn Stock: 12555747827-4 Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

183-009-113R561

NorComp Inc.In Stock: 1285183-009-113R561 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 5747827-4 are identified based on strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector style: D-Sub
• Connector type: Plug, Male Pins
• Number of positions: 9
• Number of rows: 2
• Shell size and layout: 1 (DE, E)
• Mounting type: Through Hole, Right Angle
• Termination method: Solder
• Backset spacing: 0.590" (14.99mm)
• Contact material: Brass
• Operating temperature range: -55°C ~ 105°C
• Material flammability rating: UL94 V-0
• Connector category: D-Sub, D-Shaped Connectors

Acceptable Variations in Substitute Parts:

• Manufacturer source (NorComp Inc. as alternative to TE Connectivity)
• Shell material finish (Nickel Plated as alternative to Tin Plated)
• Contact finish thickness (Flash as alternative to standard)
• Current rating (5A acceptable as lower rating than 6A main part)
• Flange feature configuration (Housing/Shell vs. Mating Side variations)
• Packaging format (Tray as alternative to Tube)
• Dielectric material composition (Polyamide PA9T/Nylon 9T)
• RoHS certification level (ROHS3 Compliant as equivalent to RoHS Compliant)

All substitute parts maintain active product status, REACH Unaffected compliance, and EAR99 ECCN classification consistent with the main part.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5747827-4 (Primary Part)

The TE Connectivity 5747827-4 maintains active product status with established supply availability (1151 pieces in stock). This part carries RoHS Compliant certification and REACH Unaffected status. The 6A current rating and tin-plated steel shell provide the specified electrical and environmental performance characteristics. Selection of this part is appropriate for applications requiring the original manufacturer specification.

NorComp 183-009-113R171 (Substitute Option)

The NorComp 183-009-113R171 provides functional equivalence with identical connector geometry, position count, shell size, and operating temperature range. This part carries ROHS3 Compliant certification and REACH Unaffected status. The nickel-plated steel shell and 5A current rating represent acceptable variations for applications where the lower current rating meets circuit requirements. The Housing/Shell flange feature matches the main part configuration. This substitute is suitable for through-hole solder applications requiring NorComp sourcing.

NorComp 183-009-113R561 (Substitute Option)

The NorComp 183-009-113R561 provides functional equivalence with identical connector geometry, position count, shell size, and operating temperature range. This part carries ROHS3 Compliant certification and REACH Unaffected status. The Mating Side Female Screwlock flange feature differs from the main part Housing/Shell configuration, providing alternative mechanical mounting characteristics. The 5A current rating and nickel-plated steel shell represent acceptable variations. This substitute is suitable for applications requiring board lock features and NorComp sourcing.

All substitute parts maintain UL94 V-0 flammability compliance and brass contact material specifications. Selection between substitute options depends on specific flange feature requirements and current rating adequacy for the target application.

Frequently Asked Questions (FAQ)

Q: Can the NorComp 183-009-113R171 directly replace the TE Connectivity 5747827-4 in existing designs?

A: The NorComp 183-009-113R171 shares identical connector style, position count, shell size, backset spacing, and operating temperature range. The primary difference is the 5A current rating versus the 6A rating of the main part. Direct replacement is possible if the application circuit operates at or below 5A. The nickel-plated finish and ROHS3 compliance are functionally equivalent to the tin-plated, RoHS Compliant main part.

Q: What is the difference between the two NorComp substitute options?

A: Both NorComp parts (183-009-113R171 and 183-009-113R561) share identical electrical specifications and operating parameters. The primary distinction is the flange feature: the 183-009-113R171 uses Housing/Shell (4-40) configuration matching the main part, while the 183-009-113R561 uses Mating Side Female Screwlock (4-40) configuration. The 183-009-113R561 also includes Board Lock features. Selection depends on mechanical mounting requirements and connector interface specifications.

Q: Are there packaging differences between the main part and substitute parts?

A: The TE Connectivity 5747827-4 is supplied in Tube packaging, while both NorComp substitute parts (183-009-113R171 and 183-009-113R561) are supplied in Tray packaging. This difference affects handling, storage, and bulk ordering considerations but does not impact connector functionality or electrical performance.

Q: Does the shell material finish difference affect connector performance?

A: The main part features tin-plated steel shell, while substitute parts feature nickel-plated steel shell. Both finishes provide corrosion resistance and electrical conductivity suitable for D-Sub connector applications. The nickel plating in substitute parts is functionally equivalent for signal transmission and environmental protection in standard operating conditions.

Q: What compliance certifications apply to all parts in this substitution group?

A: All parts maintain UL94 V-0 material flammability rating and REACH Unaffected status. The main part carries RoHS Compliant certification, while substitute parts carry ROHS3 Compliant certification. Both RoHS compliance levels meet regulatory requirements for restricted substance elimination. All parts are classified as EAR99 for export control purposes and share identical HTSUS tariff classification (8536.69.4040).

Q: Can the 5A-rated substitute parts handle the same current loads as the 6A main part?

A: The substitute parts are rated for 5A maximum continuous current, while the main part is rated for 6A. Applications requiring sustained current above 5A must use the TE Connectivity 5747827-4. Applications operating at or below 5A can use either substitute part without current-related limitations.

Q: Are the dielectric materials in substitute parts compatible with the main part application?

A: The main part does not specify dielectric material composition. The substitute parts specify Polyamide (PA9T) and Nylon 9T dielectric materials. These materials provide electrical insulation and mechanical support equivalent to standard D-Sub connector construction. Compatibility depends on specific application environmental and electrical requirements.