Amphenol ICC 57202-F51-13 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 57202-F51-13 is a rectangular connector header for surface mount applications, featuring 26 positions at 2.00mm pitch in a 2-row configuration. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The connector is designed for board-to-board applications with push-pull fastening and solder termination.

Substiute Parts

57202-F51-13

Amphenol ICC (FCI)In Stock: 106157202-F51-13 Datasheet

Current PartRFQ

57202-S52-10LF

Amphenol ICC (FCI)In Stock: 84857202-S52-10LF Datasheet

DirectRFQ

NRPN132MAMP-RC

Sullins Connector SolutionsIn Stock: 1240NRPN132MAMP-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 57202-F51-13 is determined by the following critical parameters:

Primary Matching Criteria:

• Connector type (Header)
• Contact type (Male Pin)
• Pitch - Mating (0.079" / 2.00mm)
• Row spacing - Mating (0.079" / 2.00mm)
• Mounting type (Surface Mount)
• Fastening type (Push-Pull)
• Current rating (2A AC/DC minimum)
• Voltage rating (200V AC/DC minimum)
• Material flammability rating (UL94 V-0)

Allowable Variations:

• Number of positions (within same series compatibility)
• Contact length - Mating (mechanical accommodation dependent on PCB design)
• Contact finish thickness (functional equivalence maintained)
• Insulation material (thermoplastic or polyamide acceptable)
• Product status (Active preferred for obsolete parts)
• RoHS compliance (preferred for new designs)

Two substitute parts meet these criteria with documented compatibility to the 57202-F51-13.

Parameter Comparison

Engineering Selection Recommendations

NRPN132MAMP-RC (Sullins Connector Solutions) is the primary recommended substitute for the 57202-F51-13. This part maintains identical position count (26) and pitch specifications, ensuring direct mechanical and electrical compatibility. The NRPN132MAMP-RC is Active status with ROHS3 compliance, supporting long-term availability and regulatory alignment. Operating temperature range (-40°C to 105°C) is specified, providing defined thermal performance. The voltage rating of 150V meets or exceeds typical 2.00mm pitch connector applications, though designs operating at the full 200V specification of the original part require evaluation.

57202-S52-10LF (Amphenol ICC) is a secondary substitute within the same manufacturer's Minitek® 2.00mm series. This part is Active status with RoHS compliance and maintains the same pitch and electrical ratings as the original. The 20-position configuration requires PCB layout modification compared to the 26-position original. Contact length is increased to 0.157" (4.00mm), necessitating accommodation in mating connector design. This option is suitable for designs where position count reduction is acceptable and where the same manufacturer lineage is preferred.

Frequently Asked Questions (FAQ)

Q: Can the 57202-S52-10LF be used as a direct replacement for the 57202-F51-13?

A: The 57202-S52-10LF shares the same pitch (2.00mm), row spacing, mounting type, and electrical ratings. However, it has 20 positions instead of 26, requiring PCB layout modification. Contact length is also increased from 0.079" to 0.157". Use this substitute only if your design can accommodate the reduced position count and longer contact engagement.

Q: What are the key differences between the NRPN132MAMP-RC and the original 57202-F51-13?

A: The NRPN132MAMP-RC maintains the same 26-position count and 2.00mm pitch as the original. Primary differences are: manufacturer (Sullins vs. Amphenol), contact length (0.141" vs. 0.079"), voltage rating (150V vs. 200V), and product status (Active vs. Obsolete). The NRPN132MAMP-RC includes specified operating temperature range and ROHS3 compliance.

Q: Is the voltage rating difference between 150V (NRPN132MAMP-RC) and 200V (57202-F51-13) significant?

A: The voltage difference depends on your application requirements. If your design operates at or near 200V, the NRPN132MAMP-RC's 150V rating may not be suitable. For applications below 150V, this difference is not a limiting factor. Verify your circuit voltage specifications before selection.

Q: Why does the NRPN132MAMP-RC have a longer contact length?

A: Contact length (0.141" vs. 0.079") affects mating depth and mechanical engagement. The longer contact on the NRPN132MAMP-RC provides increased engagement length, which may require mating connector adjustment or PCB cavity depth modification. Confirm mating connector compatibility before implementation.

Q: Are all three parts RoHS compliant?

A: No. The original 57202-F51-13 is RoHS non-compliant. The 57202-S52-10LF is RoHS Compliant. The NRPN132MAMP-RC is ROHS3 Compliant. For new designs subject to RoHS regulations, either substitute is acceptable; the NRPN132MAMP-RC provides the highest compliance level.

Q: Can I use these substitutes interchangeably in the same design?

A: No. The 57202-S52-10LF has a different position count (20 vs. 26) and longer contact length, requiring PCB redesign. The NRPN132MAMP-RC maintains position count but has different contact length and voltage rating. Each substitute requires design evaluation for your specific application before implementation.