Equivalent & Substitute Parts for 57102-F08-03ULF

Part Overview

The 57102-F08-03ULF is an Amphenol ICC Minitek® 2.00mm rectangular connector header designed for through-hole board-to-board applications. This unshrouded, 6-position 2-row header features male pins with solder termination and push-pull fastening. The part is Active status and RoHS Compliant, making it suitable for standard electronic assembly applications requiring 2A current capacity at 200V.

Equivalent and substitute parts are identified to provide procurement flexibility, ensure supply chain continuity, and support design requirements where the primary part may be unavailable or where alternative specifications meet application needs.

Substiute Parts

57102-F08-03ULF

Amphenol ICC (FCI)In Stock: 73357102-F08-03ULF Datasheet

Current PartRFQ

M22-2580305

Harwin Inc.In Stock: 2447M22-2580305 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The M22-2580305 from Harwin Inc. qualifies as a substitute based on the following critical parameters:

• Identical mating pitch: 0.079" (2.00mm)
• Identical position count: 6 positions in 2-row configuration
• Identical row spacing: 0.079" (2.00mm)
• Matching connector type: Header with male pins
• Matching mounting method: Through-hole solder termination
• Matching fastening mechanism: Push-pull
• Matching contact geometry: Square shape
• Matching insulation material classification: UL94 V-0
• Matching moisture sensitivity: MSL 1 (Unlimited)
• Matching ECCN and HTSUS classifications

These parameters define the functional and mechanical interchangeability envelope for this connector category.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain Active product status and meet UL94 V-0 flammability requirements. The 57102-F08-03ULF carries RoHS Compliant certification, while the M22-2580305 carries ROHS3 Compliant certification, indicating compliance with current regulatory standards.

The M22-2580305 offers the additional feature of cuttable design, providing flexibility for applications requiring custom position counts. Both parts are MSL 1 rated, indicating no moisture sensitivity constraints during storage and handling.

Selection between these parts should be based on availability, lead time, packaging format (Tube versus Bulk), and any design-specific requirements related to the cuttable feature or contact material composition.

Frequently Asked Questions (FAQ)

Q: Can M22-2580305 directly replace 57102-F08-03ULF in existing designs?

A: Yes. Both parts share identical mating pitch (2.00mm), position count (6 in 2 rows), row spacing, mounting method (through-hole), termination (solder), and fastening mechanism (push-pull). Mechanical and electrical compatibility is established through these matching parameters.

Q: What is the significance of the "Cuttable" feature on the M22-2580305?

A: The cuttable design allows the header to be separated into smaller position counts if required by the application. The 57102-F08-03ULF does not offer this feature and is fixed at 6 positions.

Q: Are there differences in current or voltage ratings between these parts?

A: The 57102-F08-03ULF specifies 2A (AC/DC) at 200V (AC/DC). The M22-2580305 specifies 1A per contact with no voltage rating provided in the available data. Applications requiring the full 2A capacity should verify M22-2580305 suitability through the manufacturer's detailed specifications.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 represents compliance with the current RoHS Directive 2011/65/EU as amended. Both certifications indicate compliance with hazardous substance restrictions; ROHS3 reflects the updated regulatory framework.

Q: Do packaging differences affect interchangeability?

A: Packaging format (Tube for 57102-F08-03ULF versus Bulk for M22-2580305) does not affect electrical or mechanical interchangeability. Packaging selection depends on procurement quantity, handling requirements, and inventory management practices.

Q: What contact material differences exist between these parts?

A: The 57102-F08-03ULF uses Copper Alloy contacts, while the M22-2580305 uses Phosphor Bronze. Both materials are suitable for standard connector applications; material selection may influence contact resistance and durability characteristics in specific operating environments.