LED Circuit Board Indicator 5700100233F Equivalent & Substitute Parts

Part Overview

The Dialight 5700100233F is a Circuit Board Indicator LED assembly configured as a 3-high unit with one green LED and two yellow LEDs. This through-hole, right-angle mounted component is designed for applications requiring multi-color status indication on printed circuit boards. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating, making it suitable for standard industrial and commercial applications where component availability or inventory management may necessitate equivalent alternatives.

Substiute Parts

5700100233F

DialightIn Stock: 8475700100233F Datasheet

Current PartRFQ

5700100332F

DialightIn Stock: 7815700100332F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The Dialight 5700100332F qualifies as a direct substitute for the 5700100233F based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Identical configuration: 3-high assembly with 1 green and 2 yellow LEDs
• Identical lens specifications: 2.00mm diameter, diffused, round with domed top
• Identical mounting: through-hole, right-angle orientation
• Identical electrical ratings: 2.2V/25mA green, 2.1V/30mA yellow
• Identical optical characteristics: 565nm/590nm wavelengths, 10mcd/8mcd brightness, 70° viewing angle
• Identical compliance: ROHS3, REACH Unaffected, MSL 1

Both parts belong to the Dialight 570 series and share the same base product number (5700100), confirming their interchangeability at the functional and physical level.

Parameter Comparison

Engineering Selection Recommendations

Both the 5700100233F and 5700100332F are active production parts with full regulatory compliance. Selection between these parts should be based on inventory availability and lead time requirements. The 5700100233F currently has 820 units in stock, while the 5700100332F has 712 units available. Both parts carry identical ROHS3 certification and REACH Unaffected status, confirming their suitability for equivalent applications without additional compliance verification. No functional or performance differentiation exists between these parts; they are direct interchangeable alternatives within the Dialight 570 series.

Frequently Asked Questions (FAQ)

Q: Can the 5700100332F be used as a direct replacement for the 5700100233F?

A: Yes. Both parts are identical in all electrical, optical, and mechanical specifications. They share the same base product number and series designation, confirming full interchangeability.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts carry identical ROHS3 compliance, REACH Unaffected status, and MSL 1 rating. No additional testing or qualification is required when substituting between these parts.

Q: What are the critical parameters that determine substitutability for this LED assembly?

A: Substitutability is determined by: configuration (3-high with 1 green, 2 yellow), lens specifications (2.00mm diffused round domed), mounting type (through-hole right-angle), electrical ratings (2.2V/25mA green, 2.1V/30mA yellow), and optical characteristics (565nm/590nm wavelengths, 10mcd/8mcd brightness, 70° viewing angle).

Q: Can these parts be used in applications requiring different voltage or current ratings?

A: No. Both parts are rated for 2.2V at 25mA (green) and 2.1V at 30mA (yellow). Applications requiring different electrical specifications require alternative part numbers outside this substitution group.

Q: Are there any packaging or handling differences between these parts?

A: Both parts are supplied in bulk packaging with identical moisture sensitivity level (MSL 1 - Unlimited). No special handling or storage requirements differentiate these parts.