TE Connectivity 569564-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 569564-1 is a modular jack connector with 8 positions/8 contacts (RJ45/Ethernet) configured for 90° right-angle mounting with through-hole solder termination. The connector features shielding with EMI finger design and is rated for Cat3 applications. This part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design and procurement requirements. Active alternative products are available from multiple manufacturers with comparable electrical and mechanical characteristics.

Key Parameters

Parameter	569564-1 Specification
Connector Type	Jack (RJ45/Ethernet)
Number of Positions/Contacts	8p8c
Number of Ports	1
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Shielding	Shielded, EMI Finger
Tab Direction	Down
Operating Temperature Range	-40°C ~ 85°C
Contact Material	Phosphor Bronze
Contact Finish	Gold
Housing Material	Polyamide (PA), Nylon
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution eligibility for the 569564-1 is determined by strict alignment with the following core parameters:

Primary Substitution Criteria:

Connector type: Jack (RJ45/Ethernet modular connector)
Contact configuration: 8 positions/8 contacts (8p8c)
Mounting method: Through hole solder termination
Orientation: 90° right-angle configuration
Shielding: Shielded construction with EMI finger
Number of ports: Single port (1)
Tab direction: Down orientation
Operating temperature range: Minimum -40°C to 85°C capability

Secondary Compatibility Factors:

Contact material and finish (gold plating preferred for signal integrity)
Housing material compatibility with PCB assembly processes
Regulatory compliance status (RoHS3 compliance preferred for new designs)
Moisture sensitivity level (MSL 1 acceptable)

Substitute parts are grouped into two categories: direct equivalents with identical specifications and functional alternatives that meet core electrical and mechanical requirements while offering enhanced features or improved compliance status.

Parameter Comparison

Parameter	569564-1	5569564-1	7499011222A	7499211125	ARJC02-111009D	J0026D01ENL	J0006D01BNL	J00-0066NL
Manufacturer	TE Connectivity	TE Connectivity	Würth Elektronik	Würth Elektronik	Abracon LLC	Pulse Electronics	Pulse Electronics	Pulse Electronics
Connector Type	Jack (RJ45)	Jack (RJ45)	RJ45	RJ45	RJ45	RJ45	RJ45	RJ45
Number of Positions	8p8c	8p8c	1 Port	1 Port	1 Port	1 Port	1 Port	1 Port
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Orientation	90° Right	90° Right	90° Right	90° Right	90° Right	90° Right	90° Right	90° Right
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shielding	Shielded, EMI Finger	Shielded, EMI Finger	Shielded, EMI Finger	Shielded, EMI Finger	Shielded	Shielded	Shielded	Shielded, EMI Finger
Tab Direction	Down	Down	Down	Up	Down	Down	Down	Down
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	0°C ~ 70°C	0°C ~ 70°C	0°C ~ 70°C	0°C ~ 70°C
Contact Material	Phosphor Bronze	Phosphor Bronze	Tin	Tin	Not specified	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Contact Finish	Gold	Gold	Gold	Gold	Not specified	Gold	Gold	Gold
Housing Material	Polyamide (PA), Nylon	Polybutylene Terephthalate (PBT)	Thermoplastic	Thermoplastic	Not specified	Thermoplastic	Thermoplastic	Thermoplastic
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Equivalent (Highest Compatibility):

The 5569564-1 from TE Connectivity AMP Connectors represents the direct equivalent to the obsolete 569564-1. This part maintains identical electrical and mechanical specifications including 8p8c configuration, 90° right-angle orientation, through-hole solder termination, shielded EMI finger design, and -40°C to 85°C operating temperature range. The primary difference is housing material (PBT versus PA/Nylon) and active product status. The 5569564-1 carries ROHS3 compliance, making it suitable for new designs and procurement cycles. This part is recommended as the primary replacement for direct substitution.

Functional Alternatives (Enhanced Compliance):

The Würth Elektronik 7499011222A, 7499211125, and Pulse Electronics J0026D01ENL, J0006D01BNL, and J00-0066NL are functional alternatives that meet core mechanical and electrical requirements. These parts maintain through-hole solder termination, 90° right-angle orientation, single-port RJ45 configuration, and shielded construction. All alternatives carry active product status and RoHS compliance (ROHS3 or RoHS Compliant).

The Würth Elektronik 7499211125 differs in tab direction (Up versus Down) and includes Power over Ethernet (PoE) capability with 6 cores per jack. The Pulse Electronics alternatives feature phosphor bronze contacts with gold finish, matching the original 569564-1 contact material specification more closely than Würth alternatives.

Temperature Range Consideration:

The Abracon LLC ARJC02-111009D and all Pulse Electronics alternatives (J00-0045NL, J00-0063NL, J00-0066NL, J0006D01BNL, J0026D01ENL) operate within 0°C to 70°C range, which is narrower than the original 569564-1 specification of -40°C to 85°C. These parts are suitable only for applications within their specified temperature envelope.

Regulatory Compliance:

All substitute parts carry RoHS compliance status (ROHS3 or RoHS Compliant), addressing the non-compliant status of the obsolete 569564-1. This compliance improvement is beneficial for new product designs and procurement in regulated markets.

Frequently Asked Questions (FAQ)

Q: Can the 5569564-1 be used as a direct replacement for the 569564-1?

A: Yes. The 5569564-1 maintains identical electrical and mechanical specifications including connector type, contact configuration (8p8c), mounting method (through-hole solder), orientation (90° right-angle), shielding (EMI finger), and operating temperature range (-40°C to 85°C). The housing material differs (PBT versus PA/Nylon), but this does not affect functional compatibility. The 5569564-1 is active and RoHS3 compliant.

Q: What is the primary difference between the TE Connectivity 569564-1 and 5569564-1?

A: The 5569564-1 uses polybutylene terephthalate (PBT) housing material instead of polyamide (PA/Nylon), carries active product status instead of obsolete, and meets ROHS3 compliance instead of non-compliant status. All electrical and mechanical parameters remain identical.

Q: Are Würth Elektronik and Pulse Electronics alternatives fully compatible with the original 569564-1?

A: Würth Elektronik and Pulse Electronics alternatives meet core mechanical and electrical requirements: through-hole solder termination, 90° right-angle orientation, single-port RJ45 configuration, and shielded construction. However, they differ in specific parameters. The Würth 7499211125 features an Up tab direction (versus Down) and includes PoE capability. Pulse Electronics alternatives operate within 0°C to 70°C temperature range (narrower than the original -40°C to 85°C). These parts are functionally compatible for applications within their specified parameters.

Q: Why do some substitute parts have different operating temperature ranges?

A: Operating temperature range is determined by component material selection and design specifications. The original 569564-1 and TE Connectivity 5569564-1 support -40°C to 85°C. Pulse Electronics and Abracon alternatives are specified for 0°C to 70°C operation. Selection must match application requirements. Parts with narrower temperature ranges are not suitable for applications requiring extended temperature operation.

Q: What does "Tab Direction: Down" versus "Tab Direction: Up" mean?

A: Tab direction refers to the orientation of the ejection tab on the RJ45 connector. Down-oriented tabs extend downward from the connector body; Up-oriented tabs extend upward. This affects physical clearance and mating orientation on the PCB. The original 569564-1 specifies Down orientation. The Würth 7499211125 specifies Up orientation. Mechanical fit and clearance must be verified before substitution.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts listed carry RoHS compliance status (either ROHS3 Compliant or RoHS Compliant). The original 569564-1 is RoHS non-compliant. This compliance improvement in substitute parts is beneficial for new designs and procurement in regulated markets.

Q: What is the significance of EMI Finger shielding?

A: EMI Finger shielding provides enhanced electromagnetic interference protection through finger-like contact structures that improve shielding effectiveness. The original 569564-1 includes EMI Finger shielding. The TE Connectivity 5569564-1, Würth 7499011222A and 7499211125, and Pulse Electronics J00-0066NL also include EMI Finger shielding. Other alternatives include standard shielding without EMI Finger design. EMI Finger shielding is preferred for noise-sensitive applications.

Q: Can I use a substitute part with a different contact material (Tin versus Phosphor Bronze)?

A: Contact material affects electrical performance and reliability. The original 569564-1 uses phosphor bronze contacts with gold finish. Würth Elektronik alternatives use tin contacts with gold finish. Pulse Electronics alternatives use phosphor bronze contacts with gold finish. Phosphor bronze provides superior contact reliability and is preferred for high-reliability applications. Tin contacts are acceptable for general-purpose applications. Material selection should align with application requirements.

Q: What packaging options are available for substitute parts?

A: The original 569564-1 packaging is not specified. The TE Connectivity 5569564-1 is supplied in Tray packaging. Würth Elektronik alternatives are supplied in Tube packaging. Pulse Electronics alternatives are supplied in Tube, Tray, or Bulk packaging depending on the specific part number. Packaging selection affects handling, storage, and procurement logistics but does not affect electrical or mechanical compatibility.

Q: Is the Abracon ARJC02-111009D suitable for all applications requiring the 569564-1?

A: The Abracon ARJC02-111009D meets core mechanical requirements but has limitations. It operates within 0°C to 70°C temperature range (narrower than the original -40°C to 85°C specification). Contact material and finish specifications are not provided. This part is suitable only for applications within its specified temperature envelope and where contact material specifications are not critical.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message