LED Circuit Board Indicator 5690303333F Equivalent & Substitute Parts

Part Overview

The Dialight 5690303333F is an LED Circuit Board Indicator (CBI) designed for through-hole, right-angle mounting applications. This 3mm T-1 yellow LED features a 2 High x 2 Wide configuration with diffused, tinted lens and domed top. The component operates at 1.8V with 2mA current consumption and delivers 10mcd brightness at 60° viewing angle. The part is ROHS3 compliant and carries unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this product category.

Substiute Parts

5690303333F

DialightIn Stock: 11855690303333F Datasheet

Current PartRFQ

5690103333F

DialightIn Stock: 12605690103333F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Dialight 5690103333F qualifies as a substitute based on the following alignment of critical parameters:

Matching Parameters:

• Manufacturer: Dialight (same source)
• Series: 569 (same product line)
• Color: Yellow (x 4) (identical optical output)
• Wavelength - Peak: 585nm (identical spectral characteristic)
• Configuration: 2 High x 2 Wide (identical LED array layout)
• Lens Type: Diffused, Tinted (identical optical properties)
• Lens Style: Round with Domed Top (identical form factor)
• Lens Size: 3.00mm Dia (equivalent to 3mm T-1)
• Mounting Type: Through Hole, Right Angle (identical PCB interface)
• Viewing Angle: 60° (identical light distribution)
• Millicandela Rating: 10mcd (identical brightness output)
• RoHS Status: ROHS3 Compliant (equivalent compliance)
• MSL Rating: 1 (Unlimited) (equivalent moisture sensitivity)

Differing Parameters:

• Voltage Rating: 5690303333F operates at 1.8V; 5690103333F operates at 2.1V
• Current: 5690303333F draws 2mA; 5690103333F draws 20mA

Substitution is valid when circuit design accommodates the higher voltage and current specifications of the alternative part.

Parameter Comparison

Engineering Selection Recommendations

Both the 5690303333F and 5690103333F maintain Active product status with ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts depends on circuit power budget and voltage supply availability. The 5690303333F operates at lower voltage (1.8V) and lower current (2mA), suitable for low-power applications. The 5690103333F operates at higher voltage (2.1V) and higher current (20mA), appropriate for applications with higher power supply voltages. Both parts deliver identical optical performance (10mcd, 60° viewing angle, 585nm wavelength) and maintain identical mechanical form factor (3mm T-1, right-angle through-hole mounting, 2 High x 2 Wide configuration). Component selection must align with available circuit voltage and current capacity.

Frequently Asked Questions (FAQ)

Q: Can 5690103333F replace 5690303333F in any application? A: Substitution is valid only when the circuit design supports 2.1V voltage and 20mA current draw. Direct replacement in circuits designed for 1.8V and 2mA operation requires circuit modification.

Q: Are the optical characteristics identical between these parts? A: Yes. Both parts deliver 10mcd brightness, 60° viewing angle, 585nm peak wavelength, and identical lens configuration (diffused, tinted, round with domed top, 3mm).

Q: Do both parts fit the same PCB footprint? A: Yes. Both parts feature identical mounting type (through-hole, right-angle) and lens size (3mm T-1 / 3.00mm Dia), ensuring mechanical compatibility in the same PCB layout.

Q: What is the difference in power consumption? A: The 5690303333F consumes 3.6mW (1.8V × 2mA). The 5690103333F consumes 42mW (2.1V × 20mA). Circuit power budget must accommodate the higher consumption of the substitute part.

Q: Are both parts RoHS compliant? A: Yes. Both 5690303333F and 5690103333F are ROHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating.

Q: Which part should be selected for low-power applications? A: The 5690303333F is specified for low-power operation at 1.8V and 2mA. Use this part when power consumption and low voltage supply are design requirements.