LED Circuit Board Indicator 5690212200F Equivalent & Substitute Parts

Part Overview

The Dialight 5690212200F is an LED Circuit Board Indicator (CBI) designed for applications requiring a 3mm, T-1 through-hole, right-angle mounted dual-level green indicator. This component features a diffused, tinted lens with a domed top and operates at 2.2V with 2mA current consumption. The part is Active status and ROHS3 compliant, making it suitable for modern electronic assemblies. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative components that maintain functional equivalence within specified electrical and mechanical parameters.

Substiute Parts

5690212200F

DialightIn Stock: 8355690212200F Datasheet

Current PartRFQ

5530222300F

DialightIn Stock: 18385530222300F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5690212200F is determined by strict equivalence across the following critical parameters:

Color and Wavelength: Both the main part and substitute must emit green light at 565nm peak wavelength to maintain visual consistency and functional intent in indicator applications.

Configuration and Optical Properties: The 2 High configuration, diffused tinted lens, round domed top, and 3mm T-1 form factor must be identical to ensure mechanical fit and optical performance.

Electrical Characteristics: Current consumption (2mA) and millicandela rating (1.6mcd) must match to preserve circuit design compatibility and brightness consistency.

Viewing Angle: The 60° viewing angle must be maintained for consistent visibility across the intended application environment.

Mounting Type: Through-hole, right-angle mounting is mandatory for PCB compatibility and assembly process alignment.

Compliance and Environmental: RoHS3 compliance, REACH unaffected status, and MSL 1 rating must be maintained to satisfy regulatory and reliability requirements.

The substitute part 5530222300F meets all these criteria with one electrical parameter variance: the voltage rating is 1.9V compared to the main part's 2.2V. This variance is within acceptable substitution parameters for LED indicators where forward voltage tolerance is a standard design consideration.

Parameter Comparison

Engineering Selection Recommendations

Both the 5690212200F and 5530222300F are Active status components manufactured by Dialight and maintain full ROHS3 compliance and REACH unaffected status. The parts are functionally equivalent across optical, mechanical, and environmental specifications. The voltage rating difference (2.2V versus 1.9V) represents a standard parameter variance within LED indicator design tolerances and does not preclude substitution in applications where circuit design accommodates forward voltage variation. Selection between these parts should be based on inventory availability, lead time requirements, and circuit design parameters that account for the specified forward voltage of each component.

Frequently Asked Questions (FAQ)

Q: Can the 5530222300F substitute for the 5690212200F in all applications?

A: The 5530222300F is electrically and mechanically equivalent to the 5690212200F across all critical parameters except forward voltage. Substitution is valid in applications where the circuit design accommodates the 1.9V forward voltage rating of the substitute part. Circuit designers must verify that current-limiting resistor values and power supply specifications are compatible with the lower voltage rating.

Q: What is the significance of the voltage rating difference between these parts?

A: The main part operates at 2.2V forward voltage while the substitute operates at 1.9V. This difference affects the voltage drop across the LED and must be accounted for in series resistor calculations. Both parts consume 2mA current and produce identical brightness (1.6mcd), so the voltage difference is a design parameter rather than a performance limitation.

Q: Are the mechanical dimensions and mounting characteristics identical?

A: Yes. Both parts feature 3mm T-1 through-hole right-angle mounting, identical lens geometry (round with domed top, diffused tinted), and equivalent viewing angles (60°). PCB footprint and assembly compatibility are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 5690212200F and 5530222300F are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Regulatory and environmental requirements are equivalent.

Q: What factors should determine which part to use?

A: Selection should be based on inventory availability, lead time, and circuit design parameters. If the application circuit is designed for 2.2V forward voltage, use the 5690212200F. If the circuit accommodates 1.9V forward voltage or if the design includes adjustable current-limiting resistors, the 5530222300F is a valid substitute. Both parts are Active status with equivalent reliability characteristics.