LED Circuit Board Indicator 5690203333F Equivalent & Substitute Parts

Part Overview

The Dialight 5690203333F is an LED Circuit Board Indicator (CBI) designed for through-hole, right-angle mounting applications. This 3mm, T-1 form factor indicator features a 2 High x 2 Wide yellow LED configuration with diffused, tinted lens and domed top. The part operates at 1.8V with 2mA current consumption and delivers 1.6mcd brightness at a 60° viewing angle. The product is Active status and ROHS3 compliant. Equivalent and substitute parts are identified when design requirements allow for variations in electrical performance parameters while maintaining the same physical form factor, mounting configuration, and optical characteristics.

Substiute Parts

5690203333F

DialightIn Stock: 9795690203333F Datasheet

Current PartRFQ

5690103333F

DialightIn Stock: 12605690103333F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5690203333F are identified based on the following criteria:

Maintained Parameters (Must Match):

• Manufacturer: Dialight
• Series: 569
• Color: Yellow (x 4)
• Wavelength - Peak: 585nm
• Configuration: 2 High x 2 Wide
• Lens Type: Diffused, Tinted
• Lens Style: Round with Domed Top
• Lens Size: 3mm, T-1 / 3.00mm Dia
• Mounting Type: Through Hole, Right Angle
• Viewing Angle: 60°
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)
• REACH Status: REACH Unaffected

Variable Parameters (Allowed to Differ):

• Voltage Rating
• Current
• Millicandela Rating

The substitute part 5690103333F belongs to the same product series and maintains identical physical, optical, and compliance characteristics. Differences in electrical parameters (voltage, current, and brightness) allow this part to serve as a substitute when circuit design accommodates higher operating specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 5690203333F and 5690103333F are Active status products manufactured by Dialight within the 569 series. Both parts maintain ROHS3 compliance, REACH Unaffected status, and MSL rating of 1 (Unlimited), ensuring equivalent regulatory and environmental qualification.

The primary distinction between these parts lies in electrical performance specifications. The 5690203333F operates at lower voltage (1.8V) and current (2mA) with reduced brightness output (1.6mcd), making it suitable for low-power indicator applications. The 5690103333F operates at higher voltage (2.1V) and current (20mA) with increased brightness output (10mcd), suitable for applications requiring higher visibility or operating in brighter ambient conditions.

Selection between these parts depends on circuit design requirements for voltage supply, current budget, and required brightness level. Both parts share identical physical form factor, mounting configuration, and optical characteristics, ensuring mechanical and visual compatibility within the same PCB layout.

Frequently Asked Questions (FAQ)

Q: Can the 5690103333F directly replace the 5690203333F in an existing design?

A: Direct replacement requires verification that the circuit design accommodates the higher voltage rating (2.1V vs. 1.8V) and current consumption (20mA vs. 2mA). The physical form factor and mounting configuration are identical, but electrical parameters must be compatible with the existing power supply and current-limiting circuitry.

Q: Are there any optical differences between these two parts?

A: Both parts share identical color (Yellow x 4), wavelength (585nm), lens type (Diffused, Tinted), lens style (Round with Domed Top), and viewing angle (60°). The 5690103333F delivers higher brightness (10mcd vs. 1.6mcd) due to increased current consumption, but the optical characteristics and appearance remain consistent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 5690203333F and 5690103333F are ROHS3 compliant, REACH Unaffected, and carry MSL rating 1 (Unlimited). Regulatory and environmental qualifications are equivalent.

Q: What is the difference between the lens size specifications (3mm, T-1 vs. 3.00mm Dia)?

A: Both specifications refer to the same 3mm form factor. The T-1 designation and 3.00mm Dia are equivalent descriptions of the same physical package size used in the 569 series.

Q: Which part should be selected for a new design?

A: Selection depends on application requirements. Choose the 5690203333F for low-power applications with limited current budget and lower brightness requirements. Choose the 5690103333F for applications requiring higher visibility or operating in brighter environments where increased brightness is necessary.