LED Circuit Board Indicator 5690112000F Equivalent & Substitute Parts

Part Overview

The Dialight 5690112000F is an LED Circuit Board Indicator (CBI) designed for through-hole, right-angle mounting applications. This 3mm bi-level indicator combines a high green LED with a blank position in a single package, providing dual-state visual indication. The part is currently active in production with full RoHS3 and REACH compliance. Substitute parts may be required due to inventory availability, design revision updates, or specific application requirements where alternative configurations better match system specifications.

Substiute Parts

5690112000F

DialightIn Stock: 9335690112000F Datasheet

Current PartRFQ

5530122200F

DialightIn Stock: 73755530122200F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5690112000F is determined by the following critical parameters that must remain constant or compatible:

• Electrical Specifications: Voltage rating (2.1V), current rating (20mA), and wavelength (565nm green) must match or be compatible with circuit design
• Optical Characteristics: Millicandela rating (12.6mcd) and viewing angle (60°) determine brightness and visibility requirements
• Physical Form Factor: Lens size (3mm), lens style (round with domed top), and mounting type (through hole, right angle) must accommodate PCB layout constraints
• Configuration: 2 High bi-level arrangement with color assignment (green + blank) defines functional behavior
• Compliance: RoHS3 and REACH status ensure regulatory compatibility in target markets

The substitute part 5530122200F maintains electrical, optical, and mechanical compatibility while differing in color configuration (dual green instead of green/blank) and series designation (553 vs 569).

Parameter Comparison

Engineering Selection Recommendations

5690112000F remains the primary selection when bi-level indication with green/blank color assignment is required by circuit design. This part is active in production with full regulatory compliance (RoHS3, REACH) and unlimited moisture sensitivity rating suitable for standard manufacturing environments.

5530122200F serves as a functional substitute when dual green indication is acceptable in place of green/blank configuration. Both parts share identical electrical ratings, optical performance, and mechanical mounting characteristics. The substitute maintains equivalent compliance certifications and MSL rating. Selection between these parts depends solely on whether the application logic requires the blank (non-illuminated) position or can operate with dual green states.

Frequently Asked Questions (FAQ)

Q: Can 5530122200F replace 5690112000F in any application?

A: Substitution is valid only if the application can accommodate dual green LED indication instead of green/blank bi-level indication. All electrical, optical, and mechanical parameters are equivalent. Circuit logic must be reviewed to confirm compatibility with the color configuration change.

Q: Are the physical dimensions identical between these parts?

A: Both parts feature 3mm round domed-top lenses with through-hole, right-angle mounting. The main part specifies 3.00mm diameter; the substitute specifies 3mm T-1 form factor. These designations are compatible for standard PCB through-hole applications.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both 5690112000F and 5530122200F are RoHS3 compliant, REACH unaffected, and carry MSL rating 1 (unlimited). They are suitable for equivalent regulatory environments and manufacturing processes.

Q: What is the primary difference between these parts?

A: The main difference is color configuration. The 5690112000F provides one green LED and one blank position for two-state indication. The 5530122200F provides two green LEDs for dual-green indication. Electrical specifications (2.1V, 20mA, 12.6mcd, 565nm) and physical form factor are identical.

Q: Which part should be selected for new designs?

A: Selection depends on the required indication logic. If the design requires a non-illuminated (blank) state, use 5690112000F. If dual green indication meets the functional requirement, either part is acceptable based on availability and inventory considerations.