LED Circuit Board Indicator 5680102223F Equivalent & Substitute Parts

Part Overview

The Dialight 5680102223F is a 4-high LED circuit board indicator featuring three green LEDs and one yellow LED in a 3.00mm diameter through-hole, right-angle configuration. This component is designed for applications requiring multi-color status indication on printed circuit boards. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating, making it suitable for standard industrial and commercial applications where component availability or specific performance characteristics may necessitate alternative sourcing.

Substiute Parts

5680102223F

DialightIn Stock: 8685680102223F Datasheet

Current PartRFQ

5680102323F

DialightIn Stock: 12785680102323F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5680102223F is limited to components within the Dialight 568 series that maintain compatibility across the following critical parameters:

• Mounting Configuration: Through-hole, right-angle orientation required
• Physical Dimensions: 3mm lens diameter (T-1 standard)
• Electrical Compatibility: 2.1V forward voltage rating
• Color Wavelengths: 565nm (green) and 585nm (yellow) peak wavelengths
• Viewing Angle: 60° minimum viewing angle
• Compliance: RoHS3 and REACH compliance maintained

The substitute part 5680102323F shares the same base product number (5680102), series designation, mounting type, and core electrical characteristics. However, differences exist in color distribution (2 green, 2 yellow versus 3 green, 1 yellow), current rating (10mA uniform versus differentiated 30mA/20mA), lens treatment (diffused/tinted versus standard), and millicandela output. These differences define the substitution scope and must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the 5680102223F and 5680102323F maintain full RoHS3 compliance and REACH unaffected status, qualifying them for equivalent regulatory and environmental requirements. Selection between these parts must be based on the specific application's color distribution and brightness requirements.

The 5680102223F provides higher current capacity (30mA green, 20mA yellow) and is configured with three green indicators and one yellow indicator. This configuration suits applications requiring predominant green status indication with secondary yellow alert capability.

The 5680102323F operates at reduced current (10mA uniform) with balanced color distribution (two green, two yellow) and incorporates diffused, tinted lens treatment. This configuration is appropriate for applications requiring equal color representation and lower power consumption, with the diffused lens providing wider light distribution characteristics.

Both parts share identical peak wavelengths, viewing angles, voltage ratings, and millicandela outputs, ensuring consistent optical performance within their respective current specifications. The choice between these substitutes depends on circuit design requirements for current draw, color emphasis, and lens optical properties.

Frequently Asked Questions (FAQ)

Q: Can the 5680102323F directly replace the 5680102223F in existing designs?

A: Direct replacement requires verification of three factors: (1) circuit current capacity, as the substitute operates at 10mA versus the original's 30mA/20mA differentiated rating; (2) color distribution requirements, as the substitute provides equal green and yellow representation rather than three-to-one green emphasis; (3) optical diffusion characteristics, as the substitute features diffused, tinted lens treatment versus standard lens treatment.

Q: Are the physical dimensions identical between these parts?

A: Both parts use 3mm diameter round domed-top lenses in T-1 standard through-hole, right-angle configuration. Physical mounting compatibility is maintained.

Q: What are the key electrical differences?

A: The 5680102223F requires differentiated current sourcing (30mA for green LEDs, 20mA for yellow LED). The 5680102323F operates at uniform 10mA across all LEDs. Circuit design must accommodate these current specifications independently.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS3 compliant, REACH unaffected, and carry MSL rating 1 (unlimited moisture sensitivity). Regulatory and environmental requirements are equivalent.

Q: How does the diffused lens treatment affect optical performance?

A: The diffused, tinted lens on the 5680102323F alters light distribution characteristics compared to the standard lens on the 5680102223F. While peak wavelengths and millicandela ratings remain identical, the diffused treatment provides broader light scatter. Application-specific visibility requirements must be evaluated.