Equivalent & Substitute Parts for 5-6605433-8

Part Overview

The 5-6605433-8 is a 1 Port RJ45 Through Hole modular connector manufactured by TRP Connector B.V., designed for 10/100/1000 Base-T Ethernet applications with AutoMDIX capability. This connector features a 90° right-angle orientation, solder termination, and integrated LED indicators (Green-Yellow). The product is currently classified as Obsolete, making identification of functionally equivalent substitute parts essential for ongoing system design and maintenance applications.

Substiute Parts

5-6605433-8

TRP Connector B.V.In Stock: 11815-6605433-8 Datasheet

Current PartRFQ

2250027-3

TRP Connector B.V.In Stock: 11992250027-3 Datasheet

SimilarRFQ

JKM-0001NL

Pulse ElectronicsIn Stock: 1493JKM-0001NL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5-6605433-8 are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Primary Matching Parameters:

• Connector Type: RJ45
• Number of Ports: 1
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• Applications: 10/100/1000 Base-T with AutoMDIX
• Number of Cores per Jack: 8
• Shielding: Shielded with EMI Finger
• LED Color: Green - Yellow
• Contact Material: Phosphor Bronze
• Contact Finish: Gold
• Operating Temperature Range: 0°C ~ 70°C
• MSL Rating: 1 (Unlimited)

Two substitute parts meet these criteria and are presented below.

Parameter Comparison

Engineering Selection Recommendations

2250027-3 (TRP Connector B.V.): This substitute maintains identical manufacturer lineage with the main part and is currently in Active product status. It provides direct functional equivalence with matching electrical specifications, RoHS3 compliance, and identical contact finish thickness. The marginal height difference (0.35mm lower) falls within typical PCB layout tolerances for 90° right-angle connectors. This part is recommended as the primary substitute for direct replacement applications.

JKM-0001NL (Pulse Electronics): This substitute provides functional equivalence across all critical electrical parameters and maintains Active product status. It is supplied in Tray packaging and carries RoHS compliance certification. The contact finish thickness is reduced to 15.0µin (0.38µm) compared to the main part's 50.0µin (1.27µm), which may affect long-term contact durability in high-cycle mating applications. Height above board is 0.545" (13.84mm), within acceptable tolerance. This part is suitable for applications where cross-manufacturer sourcing is acceptable.

Frequently Asked Questions (FAQ)

Q: Can 2250027-3 be used as a direct replacement for 5-6605433-8?

A: Yes. Both parts are manufactured by TRP Connector B.V., share identical electrical specifications for 10/100/1000 Base-T AutoMDIX applications, and maintain matching contact finish thickness (50.0µin). The height difference of 0.35mm is within standard PCB layout tolerances for through-hole 90° connectors.

Q: What is the difference between Base-T and Base-TX applications?

A: Both designations indicate 10/100/1000 Mbps Ethernet capability with AutoMDIX. The specific application designation (Base-T vs. Base-TX) reflects manufacturer nomenclature but does not affect electrical compatibility for standard Ethernet implementations.

Q: Why does JKM-0001NL have a thinner contact finish?

A: The JKM-0001NL features a contact finish thickness of 15.0µin (0.38µm) versus 50.0µin (1.27µm) on the main part. This difference reflects different manufacturing specifications between Pulse Electronics and TRP Connector B.V. Both finishes meet RoHS compliance and standard Ethernet connector performance requirements.

Q: Are there packaging differences between these parts?

A: The main part 5-6605433-8 and substitute 2250027-3 do not specify packaging format in the provided data. The JKM-0001NL is supplied in Tray packaging. Packaging format should be confirmed with the supplier for procurement and handling requirements.

Q: What is the significance of the Obsolete status for 5-6605433-8?

A: Obsolete status indicates the part is no longer manufactured. Both substitute parts (2250027-3 and JKM-0001NL) maintain Active product status, ensuring ongoing availability and manufacturer support for new designs and production runs.