LED Circuit Board Indicator 5650F5 Equivalent & Substitute Parts

Part Overview

The VCC 5650F5 is a 3mm through-hole right-angle LED circuit board indicator featuring a green diffused, tinted lens with a round domed top. This component operates at 2.2V with a 10mA current rating and delivers 16mcd brightness output at a peak wavelength of 562nm. The 5650F5 is classified as obsolete, necessitating identification of active equivalent components that maintain functional compatibility for circuit board indicator applications. Substitute parts must preserve the mechanical form factor, electrical operating parameters, and mounting configuration to ensure direct replacement capability.

Substiute Parts

5650F5

Visual Communications Company - VCCIn Stock: 7785650F5 Datasheet

Current PartRFQ

SSF-LXH103GD

Lumex Opto/Components Inc.In Stock: 19419SSF-LXH103GD Datasheet

SimilarRFQ

WP934CB/GD

KingbrightIn Stock: 25585WP934CB/GD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5650F5 is determined by strict alignment with the following parameters:

Mandatory Matching Parameters:

• Lens size: 3mm, T-1
• Lens type: Diffused, Tinted
• Lens style: Round with Domed Top
• Color: Green
• Mounting type: Through Hole, Right Angle
• Configuration: Single
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Voltage Rating: Within ±0.2V of 2.2V nominal
• Current Rating: Up to 20mA (higher current rating acceptable for same voltage class)
• Millicandela Rating: Higher brightness acceptable
• Wavelength - Peak: Within green spectrum range (560nm–570nm acceptable)
• Viewing Angle: Variation acceptable based on application requirements
• Product Status: Active preferred for ongoing availability

Both identified substitute parts meet all mandatory matching criteria and represent active products with enhanced electrical specifications suitable for direct replacement in the 5650F5 application.

Parameter Comparison

Engineering Selection Recommendations

SSF-LXH103GD (Lumex Opto/Components Inc.): This substitute operates at 2.1V with a 20mA current rating, delivering 30mcd brightness. The 0.1V voltage differential falls within acceptable tolerance for green LED circuit board indicators. The doubled current capacity and increased brightness provide enhanced performance margin. Active product status ensures ongoing availability and supply chain continuity. ROHS3 compliance and unlimited moisture sensitivity rating match the original specification. The 60° viewing angle exceeds typical circuit board indicator requirements.

WP934CB/GD (Kingbright): This substitute maintains identical 2.2V voltage rating with a 20mA current specification, delivering 22.5mcd brightness. Voltage matching eliminates any circuit compatibility concerns. The doubled current capacity provides operational headroom. Active product status guarantees component availability. ROHS3 compliance and unlimited moisture sensitivity rating align with original specifications. The 40° viewing angle accommodates standard circuit board indicator applications.

Both substitutes are suitable for direct replacement based on product status, regulatory compliance, and electrical parameter alignment. Selection between the two depends on application-specific viewing angle requirements and brightness performance needs.

Frequently Asked Questions (FAQ)

Q: Can the SSF-LXH103GD substitute for the 5650F5 despite the 0.1V voltage difference?

A: Yes. The SSF-LXH103GD operates at 2.1V compared to the 5650F5 specification of 2.2V. This 0.1V differential is within acceptable tolerance for green LED circuit board indicators and does not compromise functional compatibility or circuit operation.

Q: What is the significance of the doubled current rating in the substitute parts?

A: Both substitute parts are rated for 20mA compared to the 5650F5 rating of 10mA. A higher current rating indicates the component can safely operate at the original 10mA specification with additional performance margin. This does not require circuit modification and enhances component reliability.

Q: Are the mechanical dimensions identical between the 5650F5 and substitute parts?

A: Yes. All three components share identical mechanical specifications: 3mm, T-1 lens size, round domed top lens style, diffused tinted lens type, and through-hole right-angle mounting configuration. Direct PCB mounting compatibility is maintained.

Q: How do the brightness ratings compare?

A: The 5650F5 delivers 16mcd. The SSF-LXH103GD delivers 30mcd, and the WP934CB/GD delivers 22.5mcd. Both substitutes provide increased brightness, which is acceptable for circuit board indicator applications where higher visibility is beneficial.

Q: What is the difference between the 60° and 40° viewing angles?

A: The SSF-LXH103GD provides a 60° viewing angle, while the WP934CB/GD provides a 40° viewing angle. The 5650F5 viewing angle is not specified. A wider viewing angle (60°) allows the indicator to be visible from a broader range of observation positions. Selection depends on the specific application's visibility requirements.

Q: Are all three components RoHS3 compliant?

A: Yes. The 5650F5, SSF-LXH103GD, and WP934CB/GD are all ROHS3 compliant with unlimited moisture sensitivity level (MSL 1), ensuring environmental and regulatory compliance across all options.

Q: Why is the 5650F5 classified as obsolete?

A: Obsolete status indicates the component is no longer manufactured by VCC. The identified substitute parts are active products from current manufacturers, ensuring long-term availability and supply chain reliability for new designs and ongoing production requirements.