Vishay Cera-Mite 564R30GAD47 Equivalent & Substitute Parts

Part Overview

The Vishay Cera-Mite 564R30GAD47 is a 4700 pF ceramic capacitor rated for 3000V (3kV) with Z5U temperature coefficient, designed for through-hole radial mounting in general purpose applications. The part is currently active in production with 944 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative temperature coefficient specifications are acceptable within application requirements.

Substiute Parts

564R30GAD47

Vishay Cera-MiteIn Stock: 979564R30GAD47 Datasheet

Current PartRFQ

564R30TSSD47

Vishay Cera-MiteIn Stock: 1104564R30TSSD47 Datasheet

MFR RecommendedRFQ

S472M69Z5UR63L0R

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 2801S472M69Z5UR63L0R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 564R30GAD47 is determined by the following core parameters:

• Capacitance value: 4700 pF (exact match required)
• Voltage rating: 3000V minimum (equal or higher acceptable)
• Tolerance: ±20% (exact match required)
• Mounting type: Through hole radial configuration
• Lead spacing and physical form factor compatibility

Two substitute parts meet these criteria:

1. 564R30TSSD47 (Vishay Cera-Mite): Identical electrical specifications with Y5S temperature coefficient instead of Z5U. Slightly larger physical dimensions (0.681" diameter vs. 0.618" diameter).

2. S472M69Z5UR63L0R (Vishay Beyschlag/Draloric/BC Components): Identical temperature coefficient (Z5U) and electrical specifications. Slightly larger physical dimensions (0.689" diameter) with 0.394" lead spacing versus 0.374" lead spacing on the primary part.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active products with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements.

564R30TSSD47 is electrically equivalent with identical capacitance, tolerance, and voltage rating. The Y5S temperature coefficient differs from the Z5U specification of the primary part. Physical dimensions are slightly larger. This substitute is suitable when Y5S temperature stability characteristics are acceptable for the application.

S472M69Z5UR63L0R maintains identical temperature coefficient (Z5U) and electrical specifications as the primary part. Operating temperature range extends to -30°C ~ 125°C, providing wider environmental coverage than the primary part's -25°C ~ 105°C range. Lead spacing is 0.394" versus 0.374", requiring PCB layout verification for compatibility. Physical dimensions are slightly larger. This substitute is suitable when Z5U temperature coefficient is required and extended operating temperature range is beneficial.

Selection between substitutes depends on temperature coefficient requirements and PCB layout constraints. Both substitutes are available in higher inventory quantities than the primary part.

Frequently Asked Questions (FAQ)

Q: Can 564R30TSSD47 be used as a direct replacement for 564R30GAD47?

A: Both parts share identical capacitance (4700 pF), tolerance (±20%), and voltage rating (3000V). The primary difference is temperature coefficient: Y5S versus Z5U. Substitution is valid only if the application does not require Z5U temperature stability characteristics. Physical dimensions are slightly larger on the 564R30TSSD47.

Q: What is the difference between Z5U and Y5S temperature coefficients?

A: Temperature coefficient designations define capacitance variation across operating temperature ranges. Both Z5U and Y5S are standard ceramic capacitor classifications. Selection between them depends on specific application requirements for capacitance stability across temperature.

Q: Can S472M69Z5UR63L0R be used in place of 564R30GAD47?

A: Yes, both parts maintain Z5U temperature coefficient and identical electrical specifications (4700 pF, ±20%, 3000V). The S472M69Z5UR63L0R has 0.394" lead spacing versus 0.374" on the primary part. PCB layout must accommodate the wider lead spacing. Physical dimensions are slightly larger. The extended operating temperature range (-30°C ~ 125°C) provides additional environmental coverage.

Q: Are there physical size constraints when using substitute parts?

A: Yes. The 564R30TSSD47 has a diameter of 0.681" (17.30mm) and height of 0.870" (22.10mm). The S472M69Z5UR63L0R has a diameter of 0.689" (17.50mm). Both are larger than the primary part's 0.618" diameter and 0.807" height. PCB layout and enclosure clearances must be verified before substitution.

Q: Do all three parts meet current compliance requirements?

A: Yes. All three parts are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic components.

Q: Which substitute has the best inventory availability?

A: S472M69Z5UR63L0R has 2768 units in stock, compared to 1088 units for 564R30TSSD47 and 944 units for the primary part 564R30GAD47.