Equivalent & Substitute Parts for 564BAJC002147ABG

Part Overview

The 564BAJC002147ABG is an LVDS XO (Standard) Pin Configurable Oscillator manufactured by Skyworks Solutions Inc. as part of the Ultra™ Si564 series. This component operates across multiple supply voltages (1.8V, 2.5V, 3.3V) and supports output frequencies of 100MHz, 125MHz, 156.25MHz, and 200MHz with ±20ppm frequency stability. The part is currently classified as Not For New Designs, making identification of suitable substitute components essential for ongoing production and maintenance applications.

Substiute Parts

564BAJC002147ABG

Skyworks Solutions Inc.In Stock: 1057564BAJC002147ABG Datasheet

Current PartRFQ

564BAJC002147ACG

Skyworks Solutions Inc.In Stock: 870564BAJC002147ACG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 564BAJC002147ABG is determined by the following critical parameters:

• Output Type: LVDS (differential signaling requirement)
• Frequency Support: 100MHz, 125MHz, 156.25MHz, 200MHz capability
• Supply Voltage Range: Compatibility with 1.8V, 2.5V, and 3.3V operation
• Frequency Stability: ±20ppm tolerance
• Operating Temperature Range: -40°C ~ 85°C
• Package Configuration: 8-SMD, No Lead form factor
• Physical Dimensions: 7.00mm x 5.00mm x 1.33mm height
• Compliance: ROHS3 Compliant, MSL Level 1

The substitute part 564BAJC002147ACG meets all critical electrical and mechanical parameters while offering improved product status classification.

Parameter Comparison

Engineering Selection Recommendations

The 564BAJC002147ACG is the direct substitute for the 564BAJC002147ABG. Both components are manufactured by Skyworks Solutions Inc. within the Ultra™ Si564 series and share identical electrical specifications for LVDS output, frequency support, supply voltage range, frequency stability, and operating temperature range. Both components maintain the same physical package dimensions and MSL Level 1 rating.

The primary distinction is product status: the main part is classified as Not For New Designs, while the substitute is Active. This status change reflects ongoing manufacturer support and availability assurance for the 564BAJC002147ACG. The substitute also demonstrates improved power efficiency with a maximum supply current of 130mA compared to 157mA in the original part, while maintaining all functional equivalence.

For applications requiring LVDS oscillator functionality at the specified frequencies and voltage levels, the 564BAJC002147ACG provides equivalent performance with enhanced lifecycle support.

Frequently Asked Questions (FAQ)

Q: Are the 564BAJC002147ABG and 564BAJC002147ACG pin-compatible?

A: Both components use the 8-SMD, No Lead package configuration with identical physical dimensions (7.00mm x 5.00mm x 1.33mm). Pin compatibility is maintained across the same package type.

Q: What is the significance of the product status difference?

A: The main part (564BAJC002147ABG) is classified as Not For New Designs, indicating the manufacturer is not recommending it for new product development. The substitute (564BAJC002147ACG) carries Active status, confirming ongoing manufacturer support and production availability.

Q: Can the 564BAJC002147ACG operate at all the same frequencies as the original part?

A: Yes. Both parts support identical output frequencies: 100MHz, 125MHz, 156.25MHz, and 200MHz with ±20ppm frequency stability across the -40°C ~ 85°C operating temperature range.

Q: Are there any supply voltage differences between these parts?

A: Both parts operate across the 1.8V to 3.3V supply voltage range. The main part specifies discrete voltage levels (1.8V, 2.5V, 3.3V), while the substitute specifies a continuous range (1.8V ~ 3.3V). This represents equivalent functional capability.

Q: What is the power consumption difference?

A: The substitute part (564BAJC002147ACG) has a maximum supply current of 130mA, compared to 157mA for the original part. This represents improved power efficiency while maintaining all electrical specifications.

Q: Are both parts RoHS compliant?

A: The main part is confirmed ROHS3 Compliant. RoHS compliance status for the substitute is not specified in the provided data.