TE Connectivity AMP Connectors 5-641333-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5-641333-2 is a modular connector plug with 6 positions and 2 contacts (RJ11) configuration, designed for flat oval cable applications with stranded or tinsel wires. This connector features unshielded construction with IDC (Insulation Displacement Contact) termination and is rated for Cat3 applications. The product is currently obsolete, necessitating identification of equivalent substitute components that maintain functional compatibility while offering active product status and current availability.

Substiute Parts

5-641333-2

TE Connectivity AMP ConnectorsIn Stock: 11455-641333-2 Datasheet

Current PartRFQ

937-SP-3026-4

Stewart ConnectorIn Stock: 889937-SP-3026-4 Datasheet

DirectRFQ

TM3P-62P

Hirose Electric Co LtdIn Stock: 1102TM3P-62P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 5-641333-2 are qualified based on the following critical parameters that determine functional interchangeability:

Primary Compatibility Criteria:

• Connector type (Plug)
• Position and contact configuration (6p2c RJ11)
• Shielding type (Unshielded)
• Termination method (IDC)
• Cable type compatibility (Flat Oval Cable with Stranded Wires)
• Housing material (Polycarbonate)
• Contact material and finish (Phosphor Bronze with Gold plating)
• Physical dimensions (length within tolerance)
• Moisture sensitivity level (MSL 1)

The identified substitute parts meet these core parameters, enabling direct functional replacement in applications originally designed for the 5-641333-2. Variations in wire gauge specifications, voltage ratings, and current ratings reflect manufacturer design differences but do not preclude substitution where the application requirements fall within the substitute part's electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

937-SP-3026-4 (Stewart Connector Series 30)

This substitute part is actively manufactured and carries ROHS3 compliance certification with REACH Unaffected status. The physical dimensions (0.525" length) are within acceptable tolerance of the original 5-641333-2 (0.530" length), with a variance of 0.005 inches. The connector supports 1.5 A at 150V, providing electrical specifications suitable for standard Cat3 modular connector applications. The Stewart Connector part is available in bulk packaging with 866 units in current inventory.

TM3P-62P (Hirose Electric Series TM3P)

This substitute part is actively manufactured with ROHS3 compliance and REACH Unaffected status. The physical dimensions (0.528" length) are within acceptable tolerance of the original part, with a variance of 0.002 inches. The connector supports 500 mA at 125V, suitable for lower-power Cat3 applications. The Hirose Electric part is available in bulk packaging with 1016 units in current inventory. Wire gauge specification of 26 AWG falls within the original part's 26-28 AWG range.

Both substitute parts maintain functional compatibility with the obsolete 5-641333-2 through identical connector configuration, termination method, and housing materials. Selection between these options depends on application-specific electrical requirements and preferred supplier relationships.

Frequently Asked Questions (FAQ)

Q: Can the 937-SP-3026-4 or TM3P-62P be used as direct replacements for the 5-641333-2?

A: Yes. Both substitute parts share identical connector type (Plug), position/contact configuration (6p2c RJ11), shielding (Unshielded), termination method (IDC), cable type compatibility, housing material (Polycarbonate), and contact specifications (Phosphor Bronze with Gold finish). Physical dimensions are within acceptable tolerance.

Q: What are the electrical differences between the substitute parts?

A: The 937-SP-3026-4 supports 1.5 A at 150V, while the TM3P-62P supports 500 mA at 125V. The original 5-641333-2 does not specify voltage or current ratings. Selection should be based on application requirements.

Q: Are there wire gauge compatibility considerations?

A: The original 5-641333-2 specifies 26-28 AWG. The TM3P-62P specifies 26 AWG, which is within this range. The 937-SP-3026-4 does not specify wire gauge but is designed for flat oval cable with stranded wires. Both are compatible with standard Cat3 cabling.

Q: What is the significance of the physical length differences?

A: The original part measures 0.530" (13.46mm), the 937-SP-3026-4 measures 0.525" (13.34mm), and the TM3P-62P measures 0.528" (13.40mm). These variations of 0.002 to 0.005 inches are within standard manufacturing tolerances for modular connectors and do not affect functional compatibility.

Q: Do the substitute parts meet current regulatory requirements?

A: Yes. Both the 937-SP-3026-4 and TM3P-62P carry ROHS3 compliance certification and REACH Unaffected status. The original 5-641333-2 lists RoHS status as "Not applicable" due to its obsolete status.

Q: What packaging options are available for the substitute parts?

A: Both substitute parts are available in bulk packaging. The 937-SP-3026-4 has 866 units in current inventory, and the TM3P-62P has 1016 units in current inventory.

Q: Are there any moisture sensitivity considerations?

A: All three parts, including the original 5-641333-2 and both substitute parts, carry Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.