APEM 5636ABK Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM 5636ABK is a panel-mount toggle switch with SPDT (Single Pole Double Throw) configuration rated for 6A at 125V AC and 4A at 30V DC. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations. The 5000 series toggle switch provides reliable switching control with front panel sealing and solder lug termination suitable for industrial and commercial applications.

Substiute Parts

5636ABK

APEM Inc.In Stock: 8355636ABK Datasheet

Current PartRFQ

5636AKB

APEM Inc.In Stock: 8735636AKB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 5636ABK is based on electrical and mechanical parameter equivalence within the APEM 5000 series toggle switch family. The substitute part must maintain identical specifications across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current and voltage ratings (6A/125V AC; 4A/30V DC)
• Mounting interface (Panel Mount with 6.50mm circular cutout and 1/4-40 bushing thread)
• Termination method (Solder Lug)
• Actuator geometry (Standard Round, 10.50mm length)
• Operating temperature range (-40°C to 85°C)
• Electrical life rating (50,000 cycles)
• Compliance certifications (ROHS3)

The 5636AKB meets all these criteria and serves as a direct functional equivalent. The primary distinction is product status: 5636ABK is obsolete while 5636AKB is active, with improved packaging (Tray vs. standard packaging) and higher inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The 5636AKB is a direct replacement for the obsolete 5636ABK. Both components share identical electrical specifications, mechanical interfaces, and compliance certifications. Selection of 5636AKB is supported by its active product status, ensuring continued availability and supply chain reliability. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can 5636AKB be used as a direct replacement for 5636ABK in existing designs?

A: Yes. The 5636AKB is electrically and mechanically identical to 5636ABK across all specified parameters. Panel cutout dimensions, bushing thread specifications, solder lug termination, and electrical ratings are equivalent. No design modifications are required.

Q: What is the difference between 5636ABK and 5636AKB?

A: The primary difference is product status and packaging. 5636ABK is obsolete with standard packaging, while 5636AKB is an active product supplied in Tray packaging. All electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both 5636ABK and 5636AKB maintain identical ROHS3 compliance and REACH unaffected status. Moisture sensitivity level (MSL 1 - Unlimited) and ECCN/HTSUS classifications are equivalent.

Q: What is the panel mounting interface for these toggle switches?

A: Both parts use a circular 6.50mm diameter panel cutout with 1/4-40 bushing thread. Solder lug termination is standard for both components.

Q: What electrical ratings apply to these SPDT toggle switches?

A: Both parts are rated for 6A at 125V AC and 4A at 30V DC. Operating temperature range is -40°C to 85°C with 50,000 cycle electrical life.