APEM Inc. 5636AB9 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM Inc. 5636AB9 is a panel-mounted toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 6A AC at 125V and 4A DC at 30V. This switch is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and circuit functionality align with the original specification, enabling direct replacement in applications where the main part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

5636AB9

APEM Inc.In Stock: 8695636AB9 Datasheet

Current PartRFQ

100SP1T6B11M1QEH

E-SwitchIn Stock: 1375100SP1T6B11M1QEH Datasheet

SimilarRFQ

2M1-SP1-T6-B1-M1QE

Carling TechnologiesIn Stock: 18232M1-SP1-T6-B1-M1QE Datasheet

SimilarRFQ

7101P3YZQE

C&KIn Stock: 355667101P3YZQE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5636AB9 are qualified based on the following criteria:

Primary Electrical Compatibility:

• SPDT circuit configuration (mandatory)
• On-On switch function (mandatory)
• AC voltage rating ≥ 125V or equivalent DC voltage rating ≥ 28V
• AC current rating ≥ 5A (acceptable reduction from 6A AC specification)
• DC current rating ≥ 4A (acceptable at reduced voltage)

Mechanical Compatibility:

• Panel mount configuration (mandatory)
• Solder lug termination (mandatory)
• Panel cutout diameter 6.35mm to 6.50mm (compatible with standard panel openings)
• Actuator length within 11.40mm to 12.30mm range (functional interchangeability)

Compliance & Certification:

• RoHS3 compliance (mandatory for equivalent substitution)
• Active product status (current availability)
• MSL rating 1 (Unlimited) for storage compatibility

Three substitute parts meet these criteria: 2M1-SP1-T6-B1-M1QE (Carling Technologies), 100SP1T6B11M1QEH (E-Switch), and 7101P3YZQE (C&K).

Parameter Comparison

Engineering Selection Recommendations

2M1-SP1-T6-B1-M1QE (Carling Technologies 2M Series)

This substitute maintains identical AC voltage rating (125V) and electrical life (50,000 cycles) as the 5636AB9. The 5A AC current rating is acceptable for applications not requiring the full 6A specification. The addition of IP67 ingress protection provides enhanced environmental sealing. Operating temperature range is reduced to -30°C to 85°C, which is suitable for most industrial applications. RoHS3 compliance and Active product status confirm current availability and regulatory alignment.

100SP1T6B11M1QEH (E-Switch 100 Series)

This substitute provides SPDT functionality with 5A AC rating at 120V, meeting the core electrical requirements. The slightly lower AC voltage rating (120V vs. 125V) is within acceptable tolerance for standard AC line applications. Electrical life of 40,000 cycles is lower than the original specification but remains suitable for general-purpose switching. RoHS3 compliance and Active status ensure regulatory compliance and availability.

7101P3YZQE (C&K 7000 Series)

This substitute offers the highest electrical life rating at 100,000 cycles, providing extended operational durability. The 5A AC rating at 120V meets functional requirements for standard applications. The actuator length of 11.43mm closely matches the original 11.40mm specification, ensuring minimal mechanical adjustment. RoHS3 compliance is confirmed; however, REACH status is listed as Affected, requiring verification for applications subject to REACH regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the 5636AB9 be directly replaced with any of these substitute parts?

A: Direct replacement is possible when the application does not require the full 6A AC current rating of the original part. All three substitutes provide 5A AC capability, which is suitable for most standard toggle switch applications. Panel cutout diameter compatibility (6.35mm vs. 6.50mm) requires verification for existing panel installations.

Q: What is the impact of the reduced current rating from 6A to 5A?

A: The substitute parts are rated for 5A AC, compared to the original 6A AC specification. This reduction is acceptable for applications with load currents at or below 5A. Applications requiring the full 6A capacity must retain the original 5636AB9 part.

Q: Are there temperature range differences between the main part and substitutes?

A: The 5636AB9 operates from -40°C to 85°C, while all three substitutes operate from -30°C to 85°C. The 10°C reduction in minimum operating temperature may impact applications in extreme cold environments. Verify application requirements before substitution.

Q: What is the significance of the IP67 rating on the Carling Technologies part?

A: The 2M1-SP1-T6-B1-M1QE includes IP67 ingress protection (dust tight, waterproof), whereas the original 5636AB9 does not specify ingress protection. This additional sealing is beneficial for applications exposed to moisture or dust but is not required for standard panel-mounted installations.

Q: How do electrical life ratings affect part selection?

A: The 5636AB9 and 2M1-SP1-T6-B1-M1QE both provide 50,000 electrical life cycles. The 100SP1T6B11M1QEH offers 40,000 cycles, while the 7101P3YZQE provides 100,000 cycles. Selection depends on application duty cycle requirements. Higher cycle ratings provide extended service life in frequent switching applications.

Q: What is the panel cutout compatibility consideration?

A: The original 5636AB9 specifies a 6.50mm circular panel cutout, while all three substitutes require 6.35mm cutouts. Existing panels drilled for 6.50mm openings may require adapter bushings or re-drilling for 6.35mm substitutes. Verify panel dimensions before installation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all three substitute parts are RoHS3 compliant. The 7101P3YZQE is noted as REACH Affected, requiring verification for applications subject to REACH regulatory requirements. The 5636AB9, 2M1-SP1-T6-B1-M1QE, and 100SP1T6B11M1QEH are REACH Unaffected.