APEM 5636AB8 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM 5636AB8 is an active production toggle switch featuring SPDT (Single Pole Double Throw) circuitry with panel mount configuration. This switch is designed for On-On applications requiring 6A AC or 4A DC switching capacity at 125V AC or 30V DC. The component is RoHS3 compliant and features epoxy sealed terminals with a non-illuminated flatted actuator. Finding equivalent substitute parts may be necessary due to inventory constraints, lead time requirements, or specific application compatibility needs.

Substiute Parts

5636AB8

APEM Inc.In Stock: 7435636AB8 Datasheet

Current PartRFQ

7101P1YZQE

C&KIn Stock: 11627101P1YZQE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the APEM 5636AB8 toggle switch are identified based on the following critical parameters that determine functional compatibility:

Circuit Configuration: SPDT topology must be maintained for equivalent switching behavior.

Switch Function: On-On operation is required for the intended application logic.

Mounting Type: Panel mount configuration ensures mechanical compatibility with existing enclosure designs.

Current and Voltage Ratings: Substitute parts must meet or exceed the AC current rating (6A minimum) and AC voltage rating (125V minimum). DC ratings of 4A at 30V establish the lower performance threshold.

Actuator Specifications: Flatted actuator type with actuator length within 21.30mm ±0.03mm tolerance ensures proper panel cutout fit and user interface consistency.

Termination Style: Solder lug termination is required for PCB integration compatibility.

Panel Cutout Dimensions: Circular cutout diameter of 6.50mm is the mechanical interface specification.

Operating Temperature Range: The -40°C to 85°C range defines the thermal operating envelope.

The C&K 7101P1YZQE is identified as a substitute based on matching SPDT circuit, On-On function, panel mount configuration, solder lug termination, and compatible actuator specifications. Electrical performance parameters show variance in current and voltage ratings that must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

APEM 5636AB8 Primary Selection: This part is the specified component with active production status and RoHS3 compliance. It meets all defined electrical and mechanical requirements with a -40°C lower operating temperature limit and 50,000 cycle electrical life rating.

C&K 7101P1YZQE Substitute Consideration: This part provides functional SPDT On-On switching with panel mount configuration and solder lug termination. The following factors require evaluation:

AC current rating is 5A versus the 6A requirement of the primary part. AC voltage rating is 120V versus the 125V requirement. DC voltage rating is 28V versus the 30V requirement. Operating temperature minimum is -30°C versus -40°C for the primary part. RoHS non-compliance status differs from the primary part's RoHS3 compliance. Panel cutout diameter is 6.35mm versus 6.50mm, requiring mechanical verification for existing panel designs.

The C&K 7101P1YZQE offers extended electrical life of 100,000 cycles compared to 50,000 cycles for the primary part.

Selection between these parts depends on application-specific requirements for current capacity, voltage margins, temperature range, regulatory compliance, and mechanical panel compatibility.

Frequently Asked Questions (FAQ)

Q: What defines electrical compatibility between the APEM 5636AB8 and C&K 7101P1YZQE?

A: Both parts share SPDT circuit configuration, On-On switch function, panel mount mounting type, and solder lug termination. These parameters establish the baseline for functional substitution. Differences in current ratings, voltage ratings, and operating temperature ranges must be evaluated against specific application requirements.

Q: Can the C&K 7101P1YZQE be used in applications requiring 6A AC at 125V?

A: The C&K 7101P1YZQE is rated for 5A AC at 120V. Application requirements exceeding these ratings cannot be met by this substitute part.

Q: What is the impact of the panel cutout diameter difference?

A: The APEM 5636AB8 requires a 6.50mm circular cutout, while the C&K 7101P1YZQE requires 6.35mm. Existing panel designs with 6.50mm cutouts may require modification to accommodate the substitute part. Mechanical verification is necessary before implementation.

Q: How do the operating temperature ranges compare?

A: The APEM 5636AB8 operates from -40°C to 85°C, while the C&K 7101P1YZQE operates from -30°C to 85°C. Applications requiring operation below -30°C cannot use the C&K substitute.

Q: What is the significance of the RoHS compliance difference?

A: The APEM 5636AB8 is RoHS3 compliant, meeting current regulatory requirements for restricted substances. The C&K 7101P1YZQE is RoHS non-compliant. Applications subject to RoHS regulations must use the APEM part or verify regulatory acceptance of the substitute.

Q: Does the higher electrical life rating of the C&K part affect substitution decisions?

A: The C&K 7101P1YZQE provides 100,000 cycles versus 50,000 cycles for the APEM part. This extended life may provide operational advantages in high-cycle applications, but does not override electrical or mechanical compatibility requirements.