APEM 5632MAB Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM 5632MAB is an SPDT (Single Pole Double Throw) toggle switch rated for 6A at 125V AC and 4A at 30V DC. This panel-mount switch features a standard round actuator with solder lug termination and is designed for on-momentary operation. The component is actively manufactured and ROHS3 compliant, making it suitable for industrial control applications requiring reliable switching functionality. Substitute parts are identified when original inventory is unavailable or when design requirements permit operation within alternative electrical and mechanical specifications.

Substiute Parts

5632MAB

APEM Inc.In Stock: 11165632MAB Datasheet

Current PartRFQ

7108TZQE

C&KIn Stock: 7857108TZQE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the APEM 5632MAB with the C&K 7108TZQE is permissible based on the following alignment of critical electrical and mechanical parameters:

Electrical Compatibility:

• Both parts feature SPDT circuit configuration with on-momentary switch function
• Current ratings are compatible: 7108TZQE rated 5A (AC/DC) operates within the 6A AC specification of 5632MAB
• Voltage ratings are compatible: 7108TZQE rated 120V AC and 28V DC are within or equivalent to 125V AC and 30V DC specifications
• Both use solder lug termination

Mechanical Compatibility:

• Both are panel-mount switches with standard round actuators
• Actuator lengths are equivalent: 17.45mm (7108TZQE) versus 17.50mm (5632MAB)
• Panel cutout dimensions are compatible: 11.91mm (7108TZQE) and 12.50mm (5632MAB) both accommodate standard 15/32-32 bushing threads
• Both feature epoxy sealed terminals

Compliance Alignment:

• Both are ROHS3 compliant
• Both carry EAR99 ECCN classification
• Both have MSL rating of 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

Primary Part (APEM 5632MAB): Use when applications require the full electrical specifications: 6A at 125V AC, 4A at 30V DC, extended low-temperature operation (-40°C), or 50,000 cycle electrical life. This part is actively manufactured with established supply availability.

Substitute Part (C&K 7108TZQE): Use when application requirements are within the following constraints: maximum 5A AC current, maximum 120V AC voltage, maximum 28V DC voltage, operating temperature minimum -30°C, and maximum 40,000 electrical cycles. This part is actively manufactured and ROHS3 compliant. The C&K 7108TZQE is suitable for applications where the lower electrical ratings and reduced cycle life do not impact system performance.

Compliance Considerations: Both parts are ROHS3 compliant and carry EAR99 ECCN classification. The 7108TZQE is REACH Affected, whereas the 5632MAB is REACH Unaffected. Regulatory requirements may influence selection in specific jurisdictions or end-use applications.

Frequently Asked Questions (FAQ)

Q: Can the C&K 7108TZQE directly replace the APEM 5632MAB in all applications?

A: No. The 7108TZQE has lower electrical ratings (5A AC vs. 6A AC; 120V AC vs. 125V AC; 28V DC vs. 30V DC) and reduced electrical life (40,000 cycles vs. 50,000 cycles). Substitution is valid only when application requirements fall within the 7108TZQE specifications.

Q: Are the panel cutout dimensions compatible?

A: Yes. The 7108TZQE has an 11.91mm panel cutout diameter, which is compatible with standard 12.50mm cutout openings. Both parts use the same 15/32-32 bushing thread, ensuring mechanical interchangeability in panel-mount installations.

Q: What is the difference in operating temperature range?

A: The APEM 5632MAB operates from -40°C to 85°C, while the C&K 7108TZQE operates from -30°C to 85°C. The 5632MAB is suitable for applications requiring extended low-temperature performance. If your application operates above -30°C, both parts are equivalent in this parameter.

Q: Are both parts RoHS compliant?

A: Yes, both the APEM 5632MAB and C&K 7108TZQE are ROHS3 compliant. However, the 7108TZQE is REACH Affected, while the 5632MAB is REACH Unaffected. Verify REACH compliance requirements for your specific application and jurisdiction.

Q: What is the significance of the 10,000-cycle difference in electrical life?

A: The APEM 5632MAB is rated for 50,000 electrical cycles, while the C&K 7108TZQE is rated for 40,000 cycles. For applications with high switching frequency or long operational life requirements, the 5632MAB provides additional margin. For applications with lower cycle counts, the 7108TZQE is acceptable.

Q: Can I use the 7108TZQE in a 6A application?

A: No. The C&K 7108TZQE is rated for a maximum of 5A AC current. Using it in a 6A application exceeds its electrical specification and may result in premature failure or safety hazards.