APEM 5632AB Toggle Switch SPDT 6A 125V Equivalent & Substitute Parts

Part Overview

The APEM 5632AB is an active production toggle switch featuring SPDT (Single Pole Double Throw) circuitry with panel mount configuration. This component is designed for applications requiring 6A AC or 4A DC switching capacity at 125V AC or 30V DC. The switch employs a standard round actuator with solder lug termination and epoxy sealed terminals for environmental protection. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate component alternatives meeting the same electrical and mechanical specifications.

Substiute Parts

5632AB

APEM Inc.In Stock: 9565632AB Datasheet

Current PartRFQ

100SP2T1B1M1QEH

E-SwitchIn Stock: 1750100SP2T1B1M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the APEM 5632AB are identified based on strict alignment of the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom)
• Mounting type (Panel Mount)
• Termination style (Solder Lug)
• Actuator type (Standard Round)
• Panel cutout dimensions (Circular configuration)
• Bushing thread specification (1/4-40)
• Current and voltage ratings within acceptable operating ranges
• Environmental sealing (Epoxy Sealed Terminals)
• Compliance certifications (ROHS3, REACH Unaffected, EAR99)

The E-Switch 100SP2T1B1M1QEH qualifies as a substitute based on matching circuit topology, mounting configuration, termination method, and mechanical interface specifications. Electrical ratings remain within compatible operational parameters for typical panel-mounted toggle switch applications.

Parameter Comparison

Engineering Selection Recommendations

Both the APEM 5632AB and E-Switch 100SP2T1B1M1QEH maintain active product status and full compliance with ROHS3 and REACH regulations. Both components carry EAR99 export classification. Selection between these parts should be based on application-specific requirements regarding current and voltage ratings, operating temperature range, and electrical life cycle expectations. The APEM 5632AB provides higher AC current capacity (6A versus 5A) and extended low-temperature operation (-40°C versus -30°C minimum). The E-Switch alternative offers higher DC current rating (5A versus 4A) and greater current inventory availability. Both components feature identical mechanical interfaces and termination methods, ensuring direct substitution capability in panel-mounted applications.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP2T1B1M1QEH directly replace the APEM 5632AB in all applications?

A: Direct substitution is possible in applications where the E-Switch electrical ratings meet or exceed the circuit requirements. The E-Switch 100SP2T1B1M1QEH provides 5A AC and 5A DC capacity compared to the APEM 5632AB's 6A AC and 4A DC. Applications requiring 6A AC operation must use the APEM part. Applications requiring only 5A or less at AC or DC voltages within 120V AC and 28V DC limits may use either part.

Q: Are the panel cutout dimensions compatible between these parts?

A: Panel cutout dimensions differ slightly. The APEM 5632AB requires a 6.50mm diameter circular cutout, while the E-Switch 100SP2T1B1M1QEH requires 6.35mm. Both use identical 1/4-40 bushing threads. Existing panel cutouts designed for the APEM part may require modification for the E-Switch alternative.

Q: What is the difference in electrical life between these components?

A: The APEM 5632AB is rated for 50,000 electrical cycles, while the E-Switch 100SP2T1B1M1QEH is rated for 40,000 cycles. Applications with high-cycle switching requirements should prioritize the APEM part.

Q: Do both parts meet the same compliance standards?

A: Both components are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. Compliance certifications are equivalent between the two parts.

Q: What is the operating temperature difference between these switches?

A: The APEM 5632AB operates from -40°C to 85°C, while the E-Switch 100SP2T1B1M1QEH operates from -30°C to 85°C. Applications requiring operation below -30°C must use the APEM part.