Dialight 5615601080 LED Circuit Board Indicator Equivalent & Substitute Parts

Part Overview

The Dialight 5615601080 is a 5mm green LED circuit board indicator with a clear domed lens, rated for 2.3V at 20mA operation. This through-hole mounted component delivers 120 millicandela at a 565nm peak wavelength with a 24° viewing angle. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for direct board-level substitution.

Substiute Parts

5615601080

DialightIn Stock: 8425615601080 Datasheet

Current PartRFQ

5615601050F

DialightIn Stock: 9565615601050F Datasheet

DirectRFQ

5615601060F

DialightIn Stock: 9785615601060F Datasheet

DirectRFQ

5615601070F

DialightIn Stock: 9705615601070F Datasheet

DirectRFQ

5615601080F

DialightIn Stock: 11685615601080F Datasheet

DirectRFQ

5615601090F

DialightIn Stock: 10105615601090F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Dialight 5615601080 is determined by strict equivalence across all electrical and mechanical parameters. The following criteria establish direct substitutability:

• Color: Green (565nm peak wavelength)
• Current rating: 20mA
• Voltage rating: 2.3V
• Luminous intensity: 120mcd
• Viewing angle: 24°
• Lens configuration: Clear, round with domed top
• Physical package: 5mm, T-1 3/4 through-hole mount
• Moisture sensitivity: MSL 1 (Unlimited)
• Environmental compliance: REACH Unaffected, ECCN EAR99

All substitute parts listed maintain these parameters without deviation. The primary distinction between the obsolete main part and active substitutes is product status and RoHS compliance level. The main part (5615601080) carries RoHS non-compliant status, while all substitute parts (5615601050F, 5615601060F, 5615601070F, 5615601080F, 5615601090F) are ROHS3 compliant.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts (5615601050F, 5615601060F, 5615601070F, 5615601080F, 5615601090F) are direct functional equivalents to the obsolete 5615601080. Selection among these active alternatives should be based on the following criteria:

Product Status: All substitute parts carry Active product status, ensuring continued manufacturer support and availability.

Compliance: All substitute parts are ROHS3 compliant, meeting current environmental regulations. The original part (5615601080) is RoHS non-compliant and should be replaced in new designs or compliance-sensitive applications.

Packaging: All substitute parts are supplied in Bulk packaging, consistent with the original part's through-hole mounting requirements.

Availability: Inventory levels across all substitutes range from 861 to 1067 pieces, providing adequate stock for production requirements.

For applications requiring RoHS compliance or where the original part is no longer available, any of the five substitute parts provides identical electrical performance and mechanical fit without design modification.

Frequently Asked Questions (FAQ)

Q: Can 5615601050F, 5615601060F, 5615601070F, 5615601080F, or 5615601090F be used as direct replacements for 5615601080?

A: Yes. All five parts are electrically and mechanically identical. They share the same 2.3V rating, 20mA current, 120mcd brightness, 565nm wavelength, 24° viewing angle, and 5mm through-hole package. The primary difference is product status (active versus obsolete) and RoHS compliance level.

Q: What is the difference between the obsolete 5615601080 and the active 5615601080F?

A: The 5615601080F is the active production equivalent of the obsolete 5615601080. Both maintain identical electrical and optical specifications. The 5615601080F carries ROHS3 compliance, while the original is RoHS non-compliant. The "F" suffix indicates the active variant.

Q: Are there any differences in lens clarity or brightness between these parts?

A: No. All parts feature clear domed lenses and deliver 120 millicandela at 565nm peak wavelength with identical 24° viewing angles.

Q: Can these parts be used interchangeably on the same circuit board?

A: Yes. All parts are through-hole mounted with identical pin configurations and physical dimensions (5mm, T-1 3/4). No board layout modifications are required.

Q: Which substitute should I select for new designs?

A: For new designs, select any active part (5615601050F, 5615601060F, 5615601070F, 5615601080F, or 5615601090F). All are ROHS3 compliant and carry Active product status. Selection may be based on inventory availability or internal part numbering conventions.

Q: Are moisture sensitivity or environmental certifications different between parts?

A: No. All parts share MSL 1 (Unlimited), REACH Unaffected status, and ECCN EAR99 classification.