Dialight 5612401070 LED Circuit Board Indicator - Equivalent & Substitute Parts

Part Overview

The Dialight 5612401070 is a 5mm red LED circuit board indicator designed for through-hole mounting applications. This part operates at 2.2V with a 10mA forward current and delivers 60 millicandela brightness with a 35° viewing angle. The component features a clear, domed lens in a T-1 3/4 form factor.

The 5612401070 carries an obsolete product status. Equivalent substitute parts are available from the same manufacturer series with active product status and improved compliance certifications, making substitution necessary for new designs and ongoing procurement.

Substiute Parts

5612401070

DialightIn Stock: 7575612401070 Datasheet

Current PartRFQ

5612401050F

DialightIn Stock: 9535612401050F Datasheet

DirectRFQ

5612401060F

DialightIn Stock: 10335612401060F Datasheet

DirectRFQ

5612401070F

DialightIn Stock: 8825612401070F Datasheet

DirectRFQ

5612401080F

DialightIn Stock: 8505612401080F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5612401070 is determined by strict equivalence across the following parameters:

• Color: Red
• Wavelength - Peak: 635nm
• Configuration: Single
• Forward Current: 10mA
• Forward Voltage: 2.2V
• Millicandela Rating: 60mcd
• Viewing Angle: 35°
• Lens Type: Clear
• Lens Style: Round with Domed Top
• Lens Size: 5mm, T-1 3/4
• Mounting Type: Through Hole
• Moisture Sensitivity Level: 1 (Unlimited)

All four substitute parts (5612401050F, 5612401060F, 5612401070F, 5612401080F) meet these electrical and mechanical parameters. The primary distinction between the main part and substitutes is product status and RoHS compliance certification level.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts (5612401050F, 5612401060F, 5612401070F, 5612401080F) are electrically and mechanically equivalent to the 5612401070. The primary selection criteria are product status and compliance certification:

Product Status: The 5612401070 is obsolete. All substitute parts carry active product status, ensuring continued availability and manufacturer support.

RoHS Compliance: The 5612401070 is RoHS non-compliant. All substitute parts are ROHS3 compliant, meeting current environmental and regulatory requirements for new designs and procurement in regulated markets.

Packaging: The 5612401070 is supplied in tape and reel packaging. All substitute parts are supplied in bulk packaging. Packaging selection depends on assembly volume and handling requirements.

For new designs and ongoing procurement, any of the four substitute parts provide equivalent electrical performance with improved compliance status. Selection among the substitutes should be based on packaging requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Are the substitute parts electrically equivalent to the 5612401070?

A: Yes. All four substitute parts (5612401050F, 5612401060F, 5612401070F, 5612401080F) operate at identical electrical parameters: 2.2V forward voltage, 10mA forward current, 60mcd brightness, and 635nm peak wavelength. They are direct functional equivalents.

Q: What is the difference between the 5612401070 and its substitutes?

A: The primary differences are product status and RoHS compliance. The 5612401070 is obsolete and RoHS non-compliant. All substitute parts are active products with ROHS3 compliance certification. Packaging also differs: the 5612401070 uses tape and reel, while substitutes use bulk packaging.

Q: Can I use these parts interchangeably in existing designs?

A: Yes, provided your circuit board design accommodates the bulk packaging format of the substitute parts. The electrical and mechanical specifications are identical, including the 5mm T-1 3/4 through-hole form factor, lens characteristics, and mounting requirements.

Q: Why should I switch from the 5612401070 to a substitute part?

A: The 5612401070 is obsolete, meaning manufacturer support and availability are limited. Substitute parts are active products with guaranteed availability. Additionally, ROHS3 compliance of the substitutes meets current regulatory requirements for many markets and applications.

Q: Are there any compatibility concerns with the substitute parts?

A: No compatibility concerns exist. All substitute parts maintain identical electrical performance, optical characteristics, and mechanical form factor. The only consideration is packaging format, which affects procurement and assembly handling but not circuit board compatibility.