LED Circuit Board Indicator 5610R1 Equivalent & Substitute Parts

Part Overview

The VCC 5610R1 is a through-hole mounted LED circuit board indicator featuring a red diffused lens with a rectangular flat-top design. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing production and maintenance applications. The 5610R1 operates at 2.1V with a 20mA current rating and delivers 5 millicandela output, suitable for standard indicator applications in electronic assemblies.

Substiute Parts

5610R1

Visual Communications Company - VCCIn Stock: 7325610R1 Datasheet

Current PartRFQ

5614101081F

DialightIn Stock: 7095614101081F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5610R1 is based on the following critical parameters that must align between the original and substitute component:

Primary Substitution Criteria:

• Color: Red (635nm wavelength peak)
• Configuration: Single LED
• Current Rating: 20mA
• Millicandela Output: 5mcd
• Lens Type: Diffused
• Lens Style: Rectangle with Flat Top
• Mounting Type: Through Hole
• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)

Allowable Variations:

• Lens dimensions may vary within mechanical compatibility constraints (7.30mm x 2.40mm original vs. 7.00mm x 2.50mm substitute)
• Voltage rating may vary (2.1V original vs. 1.9V substitute) provided circuit design accommodates the difference
• Viewing angle specification may differ if not explicitly required by application

The Dialight 5614101081F meets all primary substitution criteria and represents an active equivalent for the obsolete 5610R1.

Parameter Comparison

Engineering Selection Recommendations

The Dialight 5614101081F is the qualified substitute for the obsolete VCC 5610R1 based on the following engineering factors:

Compliance Alignment: Both components maintain ROHS3 compliance and identical MSL ratings, ensuring regulatory and environmental compatibility in production environments.

Electrical Compatibility: The 20mA current rating and 5mcd output are identical. The voltage differential (2.1V vs. 1.9V) represents a 0.2V reduction in the substitute, which is within acceptable tolerance for standard circuit designs incorporating current-limiting resistors.

Mechanical Compatibility: Both components feature through-hole mounting with rectangular flat-top lens geometry. Lens dimensions vary by approximately 0.3mm in length and 0.1mm in width, which falls within standard PCB layout tolerances for indicator applications.

Product Status: The substitute part is active and available, eliminating supply chain risk associated with the obsolete 5610R1.

Frequently Asked Questions (FAQ)

Q: Can the 5614101081F directly replace the 5610R1 without circuit modification?

A: The 5614101081F is electrically compatible with the 5610R1 in most applications. The 0.2V voltage difference (2.1V to 1.9V) is typically accommodated by existing current-limiting resistor networks. Verify circuit design parameters before implementation.

Q: What is the significance of the lens dimension difference?

A: The 5610R1 measures 7.30mm x 2.40mm while the 5614101081F measures 7.00mm x 2.50mm. These dimensions are similar and both fit standard through-hole PCB layouts. Confirm mechanical clearance in your specific board design.

Q: Does the Dialight substitute have different optical characteristics?

A: Both components deliver 5mcd output at 635nm wavelength. The 5614101081F specifies a 100° viewing angle, while the 5610R1 does not provide this specification. Optical performance is functionally equivalent for standard indicator applications.

Q: Are there any compliance differences between the original and substitute?

A: Both components are ROHS3 compliant with MSL rating 1 (Unlimited). No compliance barriers exist for substitution.

Q: What is the packaging difference?

A: The 5610R1 is specified with standard packaging, while the 5614101081F is supplied in bulk packaging. This affects order quantities and handling but does not impact component performance.